吉林大学学报(工学版) ›› 2018, Vol. 48 ›› Issue (2): 373-379.doi: 10.13229/j.cnki.jdxbgxb20170110

Previous Articles     Next Articles

Vibration and noise characteristics of electric bus

SHI Wen-ku1, LIU Guo-zheng1, SONG Hai-sheng2, CHEN Zhi-yong1, ZHANG Bao3   

  1. 1.State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun 130022, China;
    2.FAW-Volkswagen Automobile Co. Ltd., Changchun 130011, China;
    3.Nanjing IVECO Automobile Co. Ltd., Nanjing 210028, China
  • Received:2017-02-14 Online:2018-03-01 Published:2018-03-01

RICH HTML

2   

PDF (PC)

784

Abstract: In this paper the vibration and noise of an electric bus were studied under the conditions of uniform speed and acceleration. The LMS instruments were applied to collect the vibration and noise signals of the electric bus. The source and the characteristics of the noise and vibration were studied by spectrum and order tracking analysis. The results show that the vibration inside the bus is mainly induced by the road excitation via the suspensions under uniform speed condition, while the motor noise is sharp under accelerating condition especially in the switch frequency. This study may provide useful information for reducing the noise and vibration of electric vehicles.

Key words: vehicle engineering, electric bus, vibration and noise, order tracking, motor excitation

CLC Number: 

  • U467.1
[1] 于蓬,贺立钊,章桐,等. 集中电机驱动车辆动力传动系统NVH性能研究现状与展望[J]. 机械设计,2014, 31(3):1-6.
Yu Peng, He Li-zhao, Zhang Tong, et al. NVH performance study of centralized motor driven vehicle power train[J]. Journal of Machine Design, 2014, 31(3):1-6.
[2] Ranjbar A H, Fahimi B. AC Machines: Permanent Magnet Synchronous and Induction Machines[M]. New York: Springer, 2012.
[3] 秦勤,肖伟民,蒋从双,等. 电动汽车和燃油汽车的噪声特性对比[J]. 噪声与振动控制, 2014,34(2): 63-65.
Qin Qin, Xiao Wei-min, Jiang Cong-shuang, et al. Comparison of noise characteristics of electric and fuel vehicles[J]. Noise and Vibration Control, 2014,34(2): 63-65.
[4] Pellerey P, Cristaudo S. Electromagnetic and structural coupled simulation to investigate NVH behavior of an electrical automotive powertrain[C]∥ SAE Paper, 2012-01-1523.
[5] Pellerey P, Lanfranchi V, Friedrich G. Coupled numerical simulation between electromagnetic and structural models. Influence of the supply harmonics for synchronous machine vibrations[J]. IEEE Transactions on Magnetics, 2012,48(2): 983-986.
[6] Shin E G, Ahlswede M, Muenzberg C, et al. Noise and vibration phenomena of on-line electric vehicle[C]∥ SAE Paper, 2011-01-1726.
[7] Wang Y, Jing H, Chen W, et al. The analysis and simulation of motor’s torque ripple in electric vehicle[C]∥ 2011 International Conference on Consumer Electronics Communications and Networks (CECNet), China, 2011:5328-5331.
[8] 严刚,夏顺礼,张欢欢,等. 某纯电动车车内噪声试验分析与识别[J].合肥工业大学学报:自然科学版,2011,34 (9):1298-1301.
Yan Gang, Xia Shun-li, Zhang Huan-huan, et al. Test analysis and identification of noise inside a pure electric vehicle[J]. Journal of Hefei University of Technology(Natural Sciences), 2011,34(9):1298-1301.
[9] 黄孝慈,唐小林,于海生. 功率分流式混合动力轿车传动系噪声分析[J].机械传动,2013(11):130-133.
Huang Xiao-ci, Tang Xiao-lin, Yu Hai-sheng. Noise analysis of a power-split hybrid electric vehicle driveline[J]. Journal of Mechanical Transmission, 2013(11):130-133.
[10] 方源,章桐,于蓬,等. 集中驱动式电动车噪声特性分析与试验研究[J]. 振动与冲击,2015, 34(13): 89-94.
Fang Yuan, Zhang Tong, Yu Peng, et al. Acoustic characteristic analysis and tests for a centralized driving electric vehicle[J]. Journal of Vibration and Shock, 2015, 34(13): 89-94.
[11] 朱宇.纯电动汽车车内声品质分析评价研究[D]. 长春:吉林大学仪器科学与电气工程学院,2013.
Zhu Yu. Research onanalysis and evaluation of vehicle interior sound quality for pure electric vehicle[D].Changchun:College of Instrumentation & Electrical Engineering,Jilin University, 2013.
[12] 郭荣,万钢,左曙光,等. 燃料电池轿车主要噪声源识别的试验研究[J]. 汽车工程,2007,29(5):377-380.
Guo Rong, Wan Gang,Zuo Shu-guang, et al. An experi mental study on noise sources identification for fuel cell vehicle[J]. Automotive Engineering, 2007,29(5):377-380.
[13] 余志生. 汽车理论[M]. 5版.北京:机械工业出版社,2009.
[14] Chen S, Namuduri C, Mir S. Controller-induced parasitic torque ripples in a PM synchronous motor[J]. IEEE Transactions on Industry Applications, 2002, 38(5):1273-1281.
[15] Zhu Z Q,Wu L J, Xia Z P. An accurate subdomain model for magnetic field computation in slotted surface-mounted permanent-magnet machines[J]. IEEE Transactions on Magnetics, 2010, 46(4): 1100-1115.
[16] 宋志环.永磁同步电动机电磁振动噪声源识别技术的研究[D]. 沈阳:沈阳工业大学电气工程学院,2010.
Song Zhi-huan. Research GN Recognition of electromagnetic noise and vibration of permanent magnet synchronous machine[D]. Shenyang:School of Electrical Engineering,Shenyang University of Technology, 2010.
[17] 卢达, 赵光宙, 李楠. 包含零矢量的永磁同步电机直接转矩控制[J].电机与控制学报, 2010, 14(9):1-6.
Lu Da, Zhao Guang-zhou, Li Nan. Direct torque control with zero-voltage vector for a permanent magnet synchronous motor[J]. Electric Machines and Control, 2010, 14(9):1-6.
[18] 马琮淦,左曙光,杨德良,等. 电动车用永磁同步电机的转矩阶次特征分析[J]. 振动与冲击,2013,32(13): 81-87.
Ma Cong-gan, Zuo Shu-guang, Yang De-liang, et al. Order feature analysis for torque ripple of permanent magnet synchronous motor for an electric vehicle[J]. Journal of Vibration and Shock, 2013,32(13): 81-87.
[19] 马琮淦,左曙光,孙庆,等. 考虑时间谐波电流的永磁同步电机电磁噪声阶次特征分析[J]. 振动与冲击, 2014,33(15):108-113.
Ma Cong-gan, Zuo Shu-guang, Sun Qing, et al. Order feature analysis of electromagnetic noise in a permanent magnet synchronous motor considering current harmonics[J]. Journal of Vibration and Shock, 2014,33(15):108-113.
[20] 张守元,李玉军,杨良会.某电动汽车车内噪声改进与声品质提升[J]. 汽车工程,2016,38(10): 1245-1251.
Zhang Shou-yuan,Li Yu-jun,Yang Liang-hui.Whine noise improvement and sound quality enhancement in an electric car[J]. Automotive Engineering, 2016,38(10): 1245-1251.
[21] 孙玲,章桐,于蓬. 永磁同步电机激励特性分析[J]. 机电一体化,2014(8):36-40.
Sun Ling, Zhang Tong, Yu Peng. Analysis of theexcitation in permanent magnet synchronous motor[J]. Mechatronics, 2014(8):36-40.
[1] CHANG Cheng,SONG Chuan-xue,ZHANG Ya-ge,SHAO Yu-long,ZHOU Fang. Minimizing inverter capacity of doubly-fed machine driving electric vehicles [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1629-1635.
[2] XI Li-he,ZHANG Xin,SUN Chuan-yang,WANG Ze-xing,JIANG Tao. Adaptive energy management strategy for extended range electric vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1636-1644.
[3] HE Ren,YANG Liu,HU Dong-hai. Design and analysis of refrigeration system supplied by solar auxiliary power of refrigerator car [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1645-1652.
[4] NA Jing-xin,MU Wen-long,FAN Yi-sa,TAN Wei,YANG Jia-zhou. Effect of hygrothermal aging on steel-aluminum adhesive joints for automotive applications [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1653-1660.
[5] LIU Yu-mei,LIU Li,CAO Xiao-ning,XIONG Ming-ye,ZHUANG Jiao-jiao. Construction on collision avoidance model of bogie dynamic simulation test bench [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1661-1668.
[6] ZHAO Wei-qiang, GAO Ke, WANG Wen-bin. Prevention of instability control of commercial vehicle based on electric-hydraulic coupling steering system [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1305-1312.
[7] SONG Da-feng, WU Xi-tao, ZENG Xiao-hua, YANG Nan-nan, LI Wen-yuan. Life cycle cost analysis of mild hybrid heavy truck based on theoretical fuel consumption model [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1313-1323.
[8] ZHU Jian-feng, ZHANG Jun-yuan, CHEN Xiao-kai, HONG Guang-hui, SONG Zheng-chao, CAO Jie. Design modification for automotive body structure based on seat pull safety performance [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1324-1330.
[9] NA Jing-xin, PU Lei-xin, FAN Yi-sa, SHEN Chuan-liang. Effect of temperature and humidity on the failure strength of Sikaflex-265 aluminum adhesive joints [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1331-1338.
[10] WANG Yan, GAO Qing, WANG Guo-hua, ZHANG Tian-shi, YUAN Meng. Simulation of mixed inner air-flow integrated thermal management with temperature uniformity of Li-ion battery [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1339-1348.
[11] JIN Li-sheng, XIE Xian-yi, GAO Lin-lin, GUO Bai-cang. Distributed electric vehicle stability control based on quadratic programming [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1349-1359.
[12] KUI Hai-lin, BAO Cui-zhu, LI Hong-xue, LI Ming-da. Idling time prediction method based on least square support vector machine [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1360-1365.
[13] WANG De-jun, WEI Wei-li, BAO Ya-xin. Actuator fault diagnosis of ESC system considering crosswind interference [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1548-1555.
[14] HU Man-jiang, LUO Yu-gong, CHEN Long, LI Ke-qiang. Vehicle mass estimation based on longitudinal frequency response characteristics [J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
[15] LIU Guo-zheng, SHI Wen-ku, Chen Zhi-yong. Finite element analysis of transmission error for hypoid gears considering installation error [J]. 吉林大学学报(工学版), 2018, 48(4): 984-989.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] ZHANG Lin, ZHAO Hong-wei, YANG Yi-han, MA Zhi-chao, HUANG Hu, MA Zhi-chao. Molecular dynamics simulation of nanoindentation of single-layer graphene sheet[J]. 吉林大学学报(工学版), 2013, 43(06): 1558 -1565 .
[2] LIU Guang-jie,XU Tao,LI Jun-lou,YU Zheng-lei,XIU Hang,CHENG Fei. Design and optimization of double chamber model of gas turbine transition piece[J]. 吉林大学学报(工学版), 2014, 44(5): 1360 -1365 .
[3] ZHOU Bao-yu, ZHAO Hong-wei, XIAO Yang, ZANG Xue-bai. Image feature description method based on local entropy[J]. 吉林大学学报(工学版), 2017, 47(2): 601 -608 .
[4] CHU Liang, SUN Cheng-wei, GUO Jian-hua, ZHAO Di, LI Wen-hui. Evaluation method of braking energy recovery based on wheel cylinder pressure[J]. 吉林大学学报(工学版), 2018, 48(2): 349 -354 .
[5] LI Jing, DING Ming-hui, LI Li-gang, CHEN Li-jun. Dynamic characteristics analysis and optimization of air spring based on the piston shape[J]. 吉林大学学报(工学版), 2018, 48(2): 355 -363 .
[6] HE Xiang-kun, JI Xue-wu, YANG Kai-ming, WU Jian, LIU Ya-hui. Tire slip control based on integrated-electro-hydraulic braking system[J]. 吉林大学学报(工学版), 2018, 48(2): 364 -372 .
[7] QIN Da-tong, LIN Yu-pei, HU Jian-jun, GUO Zi-han. Regenerative braking control strategy of plug-in hybrid electric vehicle based on speed ratio control continuously variable transmission[J]. 吉林大学学报(工学版), 2018, 48(2): 380 -386 .
[8] ZHANG Tian-shi, SONG Dong-jian, GAO Qing, WANG Guo-hua, YAN Zhen-min, SONG Wei. Construction of power battery liquid cooling system for electric vehicle and simulation of its working process[J]. 吉林大学学报(工学版), 2018, 48(2): 387 -397 .
[9] CHEN Ji-qing, DU Tian-ya, LAN Feng-chong. Numerical analysis of human liver biomechanical response to blunt impacts[J]. 吉林大学学报(工学版), 2018, 48(2): 398 -406 .
[10] YUAN Chao-chun, ZHANG Long-fei, CHEN Long, HE You-guo, FAN Xing-gen. Braking performance of active collision avoidance system based on road identification[J]. 吉林大学学报(工学版), 2018, 48(2): 407 -414 .
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd