Journal of Jilin University(Engineering and Technology Edition) ›› 2018, Vol. 48 ›› Issue (6): 1645-1652.doi: 10.13229/j.cnki.jdxbgxb20170768

Previous Articles     Next Articles

Design and analysis of refrigeration system supplied by solar auxiliary power of refrigerator car

HE Ren(),YANG Liu,HU Dong-hai   

  1. School of Automotive and Traffic Engineering, Jiangsu University, Zhenjiang 212013, China
  • Received:2017-07-19 Online:2018-11-20 Published:2018-12-11

Abstract:

Engine as the power source of refrigeration system during the night/midway parking causes large energy consumption and much exhaust emission. To solve this problem, a refrigeration system supplied by solar auxiliary power of refrigerator car was proposed. The dynamic mathematical model was established and matching methods of the system were proposed. The effectiveness of the model was verified by experiments and the cooling performance of the solar auxiliary power was analyzed. The results show that the power generation of the system is able to supply the refrigerator for continuous operating for 4.45 h in a day. Temperature in the compartment needs about 580 s to drop from ambient temperature to the specified value at three typical driving speeds and then remains stable. Compared with the refrigeration effect of traditional refrigerator car, the system has remarkable energy-saving effect and increases the delivery range of the refrigerator car.

Key words: vehicle engineering, refrigerator car, solar auxiliary power, refrigeration system, matched design

CLC Number: 

  • U469.6

Fig.1

Structure of refrigeration system"

Fig.2

Dynamic model of refrigerated container"

Fig.3

Three order dynamic model of accumulator"

Fig.4

Model of solar array"

Fig.5

Model of refrigerator"

Fig.6

Pressure-enthalpy diagram of refrigeration system"

Table 1

Fuzzy control rule"

温差 温差变化率
负大 正小 正大
负大
负中 较小 较小 较小
负小 较小 中小 中小 中小 中小
正小 中大 中大 中大 中大 中大
正中 中大 较大 较大 较大 较大
正大 较大 较大

Fig.7

Fuzzy control output surface of compressor speed"

Table 2

Parameters of ZJL5046XLCA5 refrigerator car"

参数 数值
发动机型号 SC28R125Q5A
发动机排量/mL 2776
发动机额定功率/kW 92
箱体尺寸/mm×mm×mm 4195×2092×2203
车厢保温材料 聚氨酯
底盘型号 NJ1042ZFDCMZ

Fig.8

Electric refrigerator and controller"

Fig.9

Variation of solar radiation"

Fig.10

Output voltage of solar array in experiment and simulation"

Fig.11

Output power of solar array in experiment and simulation"

Fig.12

Output current of solar array in experiment and simulation"

Fig.13

Charge curve of accumulator"

Fig.14

Discharge curve of accumulator"

Fig.15

Variation of thermal load with vehicle speed"

Fig.16

Variation of compressor/motor power with thermal load"

Fig.17

Cooling simulation curves in the compartment at three driving speeds"

Fig.18

Cooling test curves of electric refrigerator and traditional refrigerator car"

Fig.19

Comparison of compressor speeds in different power sources"

Fig.20

Engine universal curve"

[1] Bagheri F, Fayazbakhsh M A, Bahrami M . Real-time performance evaluation and potential GHG reduction in refrigerated trailers[J]. International Journal of Refrigeration, 2017,73:24-38.
doi: 10.1016/j.ijrefrig.2016.09.008
[2] 李姝, 陈虹, 赵海艳 . 基于混合系统模型的SI汽油发动机怠速控制[J]. 吉林大学学报:工学版, 2009,39(增刊1):296-302.
Li Shu, Chen Hong, Zhao Hai-yan . Idle speed controller for SI engines based on hybrid systems model[J]. Journal of Jilin University (Engineering and Technology Edition), 2009,39(Sup.1):296-302.
[3] Liu M, Bruno F, Saman W . Thermal performance analysis of a flat slab phase change thermal storage unit with liquid-based heat transfer fluid for cooling applications[J]. Solar Energy, 2011,85(11):3017-3027.
doi: 10.1016/j.solener.2011.08.041
[4] Glouannec P, Michel B, Delamarre G , et al. Experimental and numerical study of heat transfer across insulation wall of a refrigerated integral panel van[J]. Applied Thermal Engineering, 2014,73(1):196-204.
doi: 10.1016/j.applthermaleng.2014.07.044
[5] 叶剑锋, 吕雯, 刘焕海 . 基于太阳能的箱式冷藏保温车设计与研究[J]. 物流技术, 2015,34(14):205-207.
doi: 10.3969/j.issn.1005-152X.2015.07(2).063
Ye Jian-feng, Lv Wen, Liu Huan-hai . Design and study on refrigerated and insulated vans based on solar energy[J]. Logistics Technology, 2015,34(14):205-207.
doi: 10.3969/j.issn.1005-152X.2015.07(2).063
[6] Senst J . Use of solar energy for cold production in refrigerated trucks[J]. Luft-und Kaltetechnik Karlsruhe, 1989,25(2):96-98.
[7] Modi A, Chaudhuri A, Vijay B , et al. Performance analysis of a solar photovoltaic operated domestic refrigerator[J]. Applied Energy, 2009,86(12):2583-2591.
doi: 10.1016/j.apenergy.2009.04.037
[8] 李锦, 谢如鹤, 刘广海 , 等. 冷藏车降温数学模型建立与影响因素分析[J]. 农业机械学报, 2013,44(6):175-182.
doi: 10.6041/j.issn.1000-1298.2013.06.030
Li Jin, Xie Ru-he, Liu Guang-hai , et al. Establishment of cooling mathematical model and analysis of influence factors for refrigerator car[J]. Transactions of the Chinese Society of Agricultural Machinery, 2013,44(6):175-182.
doi: 10.6041/j.issn.1000-1298.2013.06.030
[9] Wang H, Li G, Li M, et al. Third-order dynamic model of a lead acid battery for use in fuel cell vehicle simulation [C]//Proceedings 2011 International Conference on Mechatronic Science, Electric Engineering and Computer,Jilin,China, 2011: 715-720.
[10] 杨宇飞, 袁卫星 . 光伏直接驱动的蒸汽压缩式制冷系统仿真[J]. 太阳能学报, 2012,33(9):1553-1559.
Yang Yu-fei, Yuan Wei-xing . Simulation of a solar photovoltaic direct-drive vapor-compression refrigeration system[J]. Acta Energies Solaris Sinica, 2012,33(9):1553-1559.
[11] Defraeye T, Verboven P, Opara U L , et al. Feasibility of ambient loading of citrus fruit into refrigerated containers for cooling during marine transport[J]. Biosystems Engineering, 2015,134:20-30.
doi: 10.1016/j.biosystemseng.2015.03.012
[12] Aprea C, Mastrullo R, Renno C . Fuzzy control of the compressor speed in a refrigeration plant[J]. International Journal of Refrigeration, 2004,27(6):639-648.
doi: 10.1016/j.ijrefrig.2004.02.004
[13] 闵海涛, 曹云波, 曾小华 , 等. 电动汽车空调系统建模及对整车性能的影响[J]. 吉林大学学报:工学版, 2009,39(增刊1):53-57.
Min Hai-tao, Cao Yun-bo, Zeng Xiao-hua , et al. Modeling of air conditioning system for electric vehicles and its effects to vehicles performance[J]. Journal of Jilin University (Engineering and Technology Edition), 2009,39(Sup.1):53-57.
[14] 孙翠梅, 钱鹏, 赵栋 , 等. 镇江近50a气候变化及极端天气特征分析 [C]//第十届长三角气象科技论坛论文集,安吉,中国, 2013: 1-14.
[15] Rahman S M A, Masjuki H H, Kalam M A , et al. Impact of idling on fuel consumption and exhaust emissions and available idle-reduction technologies for diesel vehicles[J]. Energy Conversion and Management, 2013,74:171-182.
doi: 10.1016/j.enconman.2013.05.019
[1] CHANG Cheng,SONG Chuan-xue,ZHANG Ya-ge,SHAO Yu-long,ZHOU Fang. Minimizing inverter capacity of doubly-fed machine driving electric vehicles [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1629-1635.
[2] XI Li-he,ZHANG Xin,SUN Chuan-yang,WANG Ze-xing,JIANG Tao. Adaptive energy management strategy for extended range electric vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1636-1644.
[3] NA Jing-xin,MU Wen-long,FAN Yi-sa,TAN Wei,YANG Jia-zhou. Effect of hygrothermal aging on steel-aluminum adhesive joints for automotive applications [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1653-1660.
[4] LIU Yu-mei,LIU Li,CAO Xiao-ning,XIONG Ming-ye,ZHUANG Jiao-jiao. Construction on collision avoidance model of bogie dynamic simulation test bench [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1661-1668.
[5] ZHAO Wei-qiang, GAO Ke, WANG Wen-bin. Prevention of instability control of commercial vehicle based on electric-hydraulic coupling steering system [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1305-1312.
[6] SONG Da-feng, WU Xi-tao, ZENG Xiao-hua, YANG Nan-nan, LI Wen-yuan. Life cycle cost analysis of mild hybrid heavy truck based on theoretical fuel consumption model [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1313-1323.
[7] ZHU Jian-feng, ZHANG Jun-yuan, CHEN Xiao-kai, HONG Guang-hui, SONG Zheng-chao, CAO Jie. Design modification for automotive body structure based on seat pull safety performance [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1324-1330.
[8] NA Jing-xin, PU Lei-xin, FAN Yi-sa, SHEN Chuan-liang. Effect of temperature and humidity on the failure strength of Sikaflex-265 aluminum adhesive joints [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1331-1338.
[9] WANG Yan, GAO Qing, WANG Guo-hua, ZHANG Tian-shi, YUAN Meng. Simulation of mixed inner air-flow integrated thermal management with temperature uniformity of Li-ion battery [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1339-1348.
[10] JIN Li-sheng, XIE Xian-yi, GAO Lin-lin, GUO Bai-cang. Distributed electric vehicle stability control based on quadratic programming [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1349-1359.
[11] KUI Hai-lin, BAO Cui-zhu, LI Hong-xue, LI Ming-da. Idling time prediction method based on least square support vector machine [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1360-1365.
[12] WANG De-jun, WEI Wei-li, BAO Ya-xin. Actuator fault diagnosis of ESC system considering crosswind interference [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1548-1555.
[13] HU Man-jiang, LUO Yu-gong, CHEN Long, LI Ke-qiang. Vehicle mass estimation based on longitudinal frequency response characteristics [J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
[14] LIU Guo-zheng, SHI Wen-ku, Chen Zhi-yong. Finite element analysis of transmission error for hypoid gears considering installation error [J]. 吉林大学学报(工学版), 2018, 48(4): 984-989.
[15] YU Liang, LI He-yan, MA Biao, LI Hui-zhu, LI Ming-yang. Analysis and verification for average axial pressure attenuation of multi-disc clutch [J]. 吉林大学学报(工学版), 2018, 48(4): 990-997.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] LI Shoutao, LI Yuanchun. Autonomous Mobile Robot Control Algorithm Based on Hierarchical Fuzzy Behaviors in Unknown Environments[J]. 吉林大学学报(工学版), 2005, 35(04): 391 -397 .
[2] Zhang Quan-fa,Li Ming-zhe,Sun Gang,Ge Xin . Comparison between flexible and rigid blank-holding in multi-point forming[J]. 吉林大学学报(工学版), 2007, 37(01): 25 -30 .
[3] Liu Yao-dong, Li Guang-yu, Lian Jian-she. Effect of Al-doping on electrical and optical properties of ZnO films[J]. 吉林大学学报(工学版), 2007, 37(03): 495 -0498 .
[4] Yang Wen, Shi Yong-jiu, Wang Yuan-qing, Shi Gang . Threedimensional finite element analysis on welding residual
stresses of construction steel
[J]. 吉林大学学报(工学版), 2007, 37(02): 347 -0352 .
[5] Cheng Ping,Zhang Hai-tao,Gao Yan,Li Jun-feng,Wang Hong-yan . Application of ANN in property prediction of polyacrylate emulsion
[J]. 吉林大学学报(工学版), 2007, 37(02): 362 -0366 .
[6] Zhang Da-qing;He Qing-hua;Hao Peng;Chen Qian-gen . Robust trajectory tracking control of hydraulic excavator bucket[J]. 吉林大学学报(工学版), 2006, 36(06): 934 -938 .
[7] . [J]. 吉林大学学报(工学版), 2007, 37(06): 1300 -1303 .
[8] Che Xiang-jiu,Liu Da-you,Wang Zheng-xuan . Construction of joining surface with G1 continuity for two NURBS surfaces[J]. 吉林大学学报(工学版), 2007, 37(04): 838 -841 .
[9] Yang Qing-fang, Chen Lin . Division approach of traffic control work zone[J]. 吉林大学学报(工学版), 2006, 36(增刊2): 139 -142 .
[10] Liang Ji-cai, Li Yi, Li Zhong-ran, Zhang Wei, Liu Cheng-de . Numerical simulation of filling process in resin transfer molding for automobile bumper[J]. 吉林大学学报(工学版), 2006, 36(增刊2): 15 -19 .