液压变压器控制系统稳态刚度特性

doi:10.13229/j.cnki.jdxbgxb201604018

摘要/Abstract

摘要： 研究了液压变压器控制系统的稳态刚度特性,根据液压变压器控制系统工作原理,建立了液压变压器控制系统模型,在此基础上分别建立了液压变压器控制马达和液压变压器控制液压缸系统的稳态刚度方程式,分析了影响稳态刚度的因素。同时还推导了泵控马达和泵控制液压缸系统的稳态刚度方程式。对比实验及仿真结果表明:相对于泵控制系统,液压变压器控制系统的稳态刚度较小,并且会随着液压变压器三个配流口的排量变化而改变;增大液压变压器控制角,有利于扩大液压变压器控制系统的压力调节范围,提高系统的稳态刚度。

关键词: 流体传动与控制, 液压变压器控制系统, 稳态刚度, 泵控制系统, 液压变压器控制角

Abstract: The static stiffness of the hydraulic transformer controlled system is researched. Based on the working principle of the hydraulic transformer controlled system, the system model is built. According to this system model the static stiffness models of the hydraulic transformer controlled motor and cylinder are established respectively, and the impact factors of the stiffness are analyzed. The static stiffness models of the pump controlled motor and cylinder are also deduced. Contrast experiments and simulations are carried out. Results indicate that compared to the pump controlled system, the stiffness of the hydraulic transformer controlled system is a little smaller. The static stiffness changes with the variation of the displacement of the hydraulic transformer oil port. According to the analysis, properly increasing the control angle of the hydraulic transformer is helpful to increase the pressure adjusting range of the hydraulic transformer controlled system and improve the static stiffness.

Key words: fluid power transmission and control, hydraulic transformer controlled system, static stiffness, pump controlled system, hydraulic transformer controlled angle

中图分类号:

TH137

吴维, 狄崇峰, 胡纪滨, 苑士华. 液压变压器控制系统稳态刚度特性[J]. 吉林大学学报(工学版), 2016, 46(4): 1130-1135.

WU Wei, DI Chong-feng, HU Ji-bin, YUAN Shi-hua. Static stiffness of hydraulic transformer controlled system[J]. 吉林大学学报(工学版), 2016, 46(4): 1130-1135.

参考文献

[1] Quan Zhong-yi, Quan Long, Zhang Jin-man. Review of energy efficient direct pump controlled cylinder electro-hydraulic technology[J]. Renewable and Sustainable Energy Reviews, 2014, 35: 336-346.
[2] Wang Feng, Gu Lin-yi, Chen Ying. A continuously variable hydraulic pressure converter based on high-speed on-off valves[J]. Mechatronics, 2011, 21(8):1298-1308.
[3] 姜继海,卢红影,周瑞艳,等. 液压恒压网络系统中液压变压器的发展历程[J]. 东南大学学报:自然科学版, 2006,36(5):869-874.
Jiang Ji-hai, Lu Hong-ying, Zhou Rui-yan, et al. Development of hydraulic transformer in constant pressure rail system[J]. Journal of Southeast University (Natural Science Edition), 2006, 36(5): 869-874.
[4] 卢红影,姜继海. 液压变压器四象限工作特性研究[J].哈尔滨工业大学学报,2009,41(1):62-75.
Lu Hong-ying, Jiang Ji-hai. Four-quadrant operation characteristic of hydraulic transformer[J]. Journal of Harbin Institute of Technology, 2009, 41(1): 62-75.
[5] Peter A J A, Zhao F. Valving land phenomena of the innas hydraulic transformer[J]. International Journal of Fluid Power, 2000(1): 39-47.
[6] Wei Shen, Jiang Ji-hai, Su Xiao-yu, et al. A new type of hydraulic cylinder system controlled by the new-type hydraulic transformer[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2013, 228(12): 2233-2245.
[7] 吴维,荆崇波,胡纪滨,等. 双缸体旋转斜盘式液压变压器特性分析[J]. 机械工程学报,2013,49(22):144-149.
Wu Wei, Jing Chong-bo, Hu Ji-bin, et al. Characteristics of dual-cylinder hydraulic transformer with rotatable wash plate[J]. Journal of Mechanical Engineering, 2013, 49(22): 144-149.
[8] 欧阳小平,徐兵,杨华勇. 液压变压器及其在液压系统中的节能应用[J]. 农业机械学报,2003,34(4):100-104.
Ouyang Xiao-ping, Xu Bing, Yang Hua-yong. Hydraulic transformers and its energy-saving applications in hydraulic system[J]. Transactions of the Chinese Society for Agricultural Machinery, 2003, 34(4): 100-104.
[9] 徐兵,欧阳小平,杨华勇,等. 液压变压器排量特性[J]. 机械工程学报,2006,42(5):89-90.
Xu Bing, Ouyang Xiao-ping, Yang Hua-yong, et al. Displacement of hydraulic transformer[J]. Journal of Mechanical Engineering, 2006, 42(5): 89-90.
[10] 刘成强,姜继海. 斜盘柱塞式液压变压器的扭矩特性[J]. 华南理工大学学报:自然科学版,2011,39(6):24-28.
Liu Cheng-qiang, Jiang Ji-hai. Torque characteristics of plate-inclined plunger-type hydraulic transformer[J]. Journal of South China University of Technology (Natural Science Edition), 2011, 39(6): 24-28.
[11] 马吉恩,杨华勇,徐兵,等. 液压变压器效率特性的测试与分析[J]. 浙江大学学报:工学版,2008,42(7):1231-1235.
Ma Ji-en, Yang Hua-yong, Xu Bing, et al. Test and analysis on the efficiency of hydraulic transformer[J]. Journal of Zhejiang University (Engineering Science), 2008, 42(7): 1231-1235.
[12] 刘成强,姜继海. 斜盘柱塞式液压变压器的流量特性[J]. 吉林大学学报:工学版,2012,42(1):85-90.
Liu Cheng-qiang, Jiang Ji-hai. Flow characteristic of inclined plate and axial plunger type hydraulic transformer[J]. Journal of Jilin University(Engineering and Technology Edition), 2012, 42(1): 85-90.
[13] 卢红影,姜继海,张维官,等. 基于液压恒压网络系统的液压变压器控制液压缸系统[J]. 吉林大学学报:工学版,2009,39(4):885-890.
Lu Hong-ying, Jiang Ji-hai, Zhang Wei-guan, et al. Hydraulic transformer driving hydraulic cylinder based on constant-pressure hydraulic rail system[J]. Journal of Jilin University(Engineering and Technology Edition), 2009, 39(4):885-890.
[14] 荆崇波. 旋转斜盘液压变压器特性研究[D]. 北京:北京理工大学机械与车辆学院,2010.
Jing Chong-bo. Research on characteristics of rotate-plate hydraulic transformer[D]. Beijing: School of Mechanical Engineering, Beijing Institute of Technology, 2010.
[15] 杨华勇,欧阳小平,徐兵. 液压变压器的发展现状[J]. 机械工程学报,2003,39(5):1-5.
Yang Hua-yong, Ouyang Xiao-ping, Xu Bing. Development of hydraulic transformer[J]. Journal of Mechanical Engineering, 2003, 39(5): 1-5.
[16] 王雪芝,贺尚红. 泵控马达调速液压系统的建模与仿真[J]. 长沙理工大学学报:自然科学版,2012,9(1):73-77.
Wang Xue-zhi, He Shang-hong. Modeling and simulation of pump control motor speed control system[J]. Journal of Changsha University of Science and Technology(Natural Science), 2012, 9(1): 73-77.
[17] 高强,金勇,王力,等. 泵控缸电液位置伺服系统建模研究[J]. 兵工学报,2011,32(8):950-956.
Gao Qiang, Jin Yong, Wang Li, et al. Modeling of electro-hydraulic position servo systems of pump-controlled cylinder[J]. Acta Armamentarii, 2011, 32(8):950-956.

相关文章 15

[1]	姜继海, 葛泽华, 杨晨, 梁海健. 基于微分器的直驱电液伺服系统离散滑模控制[J]. 吉林大学学报(工学版), 2018, 48(5): 1492-1499.
[2]	刘建芳, 王记波, 刘国君, 李新波, 梁实海, 杨志刚. 基于PMMA内嵌三维流道的压电驱动微混合器[J]. 吉林大学学报(工学版), 2018, 48(5): 1500-1507.
[3]	刘国君, 马祥, 杨志刚, 王聪慧, 吴越, 王腾飞. 集成式三相流脉动微混合芯片[J]. 吉林大学学报(工学版), 2018, 48(4): 1063-1071.
[4]	刘祥勇, 李万莉. 包含蓄能器的电液比例控制模型[J]. 吉林大学学报(工学版), 2018, 48(4): 1072-1084.
[5]	王佳怡, 刘昕晖, 王昕, 齐海波, 孙晓宇, 王丽. 数字二次元件变量冲击机理及其抑制[J]. 吉林大学学报(工学版), 2017, 47(6): 1775-1781.
[6]	闻德生, 王京, 高俊峰, 周聪. 双定子单作用叶片泵闭死容腔的压力特性[J]. 吉林大学学报(工学版), 2017, 47(4): 1094-1101.
[7]	刘国君, 张炎炎, 杨旭豪, 李新波, 刘建芳, 杨志刚. 声表面波技术在金纳米粒子可控制备中的应用[J]. 吉林大学学报(工学版), 2017, 47(4): 1102-1108.
[8]	王丽, 刘昕晖, 王昕, 陈晋市, 梁燚杰. 装载机数字液压传动系统换挡策略[J]. 吉林大学学报(工学版), 2017, 47(3): 819-826.
[9]	李慎龙, 刘树成, 邢庆坤, 张静, 赖宇阳. 基于LBM-LES模拟的离合器摩擦副流致运动效应[J]. 吉林大学学报(工学版), 2017, 47(2): 490-497.
[10]	张敏, 李松晶, 蔡申. 基于无阀压电微泵控制的微流控液体变色眼镜[J]. 吉林大学学报(工学版), 2017, 47(2): 498-503.
[11]	闻德生, 陈帆, 甄新帅, 周聪, 王京, 商旭东. 双定子泵和马达在压力控制回路中的应用[J]. 吉林大学学报(工学版), 2017, 47(2): 504-509.
[12]	顾守东, 刘建芳, 杨志刚, 焦晓阳, 江海, 路崧. 压电式锡膏喷射阀特性[J]. 吉林大学学报(工学版), 2017, 47(2): 510-517.
[13]	张健, 姜继海, 李艳杰. 锥型节流阀流量特性[J]. 吉林大学学报(工学版), 2016, 46(6): 1900-1905.
[14]	吴维, 狄崇峰, 胡纪滨, 苑士华. 基于液压变压器的自适应换向驱动系统[J]. 吉林大学学报(工学版), 2016, 46(6): 1906-1911.
[15]	杨华勇, 王双, 张斌, 洪昊岑, 钟麒. 数字液压阀及其阀控系统发展和展望[J]. 吉林大学学报(工学版), 2016, 46(5): 1494-1505.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed