吉林大学学报(工学版) ›› 2013, Vol. 43 ›› Issue (06): 1510-1516.doi: 10.7964/jdxbgxb201306013

• 论文 • 上一篇    下一篇

基于改进雷达图法的变矩器匹配评价

闫清东1,2, 刘树成1, 魏巍1,2, 杨汇斌1   

  1. 1. 北京理工大学 机械与车辆学院, 北京 100081;
    2. 北京理工大学 车辆传动国家重点实验室, 北京 100081
  • 收稿日期:2012-07-30 出版日期:2013-11-01 发布日期:2013-11-01
  • 通讯作者: 刘树成(1986-),男,博士研究生.研究方向:车辆传动系统理论与技术.E-mail:liushucheng@vip.126.com E-mail:liushucheng@vip.126.com
  • 作者简介:闫清东(1964-),男,教授,博士生导师.研究方向:车辆液力传动技术.E-mail:yanqd@bit.edu.cn
  • 基金资助:

    基础产品创新科研项目(VTDP-3101).

Evaluation for matching between hydrodynamic torque converter and engine based on improved radar chart method

YAN Qing-dong1,2, LIU Shu-cheng1, WEI Wei1,2, YANG Hui-bin1   

  1. 1. School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China;
    2. National Key Laboratory of Vehicular Transmission, Beijing Institute of Technology, Beijing 100081, China
  • Received:2012-07-30 Online:2013-11-01 Published:2013-11-01

摘要:

为了定量评价液力变矩器与发动机匹配方案的合理性,根据理想匹配原则制定了无量纲的匹配评价指标,并提出了一种指标标准化评分方法。考虑了各评价指标在不同应用场合下重要性的差异,采用层次分析法确定出各评价指标的相对权重。基于改进雷达图法,建立了由匹配评价向量和匹配评价函数组成的液力变矩器与发动机匹配评价体系。以满足动力型匹配需求为例,对3组液力变矩器的共16种匹配方案进行了定量评价。结果表明:采用该方法可以准确、直观地选择出符合需要的最优匹配方案。

关键词: 液力变矩器, 变矩器匹配, 改进雷达图法, 层次分析法

Abstract:

In order to quantitatively evaluate the rationality of matching scheme between engine and torque converter, a series of dimensionless matching evaluation indexes were developed according to the ideal matching principle, and a standardized scoring method for every index was put forward. Considering the differences of importance of the evaluation indexes in different applications, relative weights of each index was determined using analytic hierarchy process. A matching evaluation system consisting of matching evaluation vector and matching evaluation function was established based on an improved radar chart method. Taking the powered matching demand as an example, three groups of hydrodynamic torque converters for a total of sixteen matching schemes were quantitatively evaluated. Evaluation results show that, using the proposed method, the optimal matching scheme can be determined accurately.

Key words: hydrodynamic torque converter, torque converter matching, improved radar chart method, analytic hierarchy process

中图分类号: 

  • TH137

[1] 胡胜,蒋波. 国产发动机与进口液力变矩器的匹配实践与分析[J]. 长沙交通学院学报,2000,16(3): 16-18. Hu Sheng, Jiang Bo. The compatibil ity and analys is of the domestic diesel engines and the import hydraul ic torque converters[J]. Journal of Changsha Communications University, 2000, 16(3):16-18.

[2] 商高高,何仁. 发动机与液力变矩器共同工作特性的分析[J]. 江苏理工大学学报:自然科学版,2000,21(6): 65-68. Shang Gao-gao, He Ren. Analysis of equilibrium running lines of engines and hydraulic torque converters[J]. Journal of Jiangsu University of Science and Technology(Natural Science),2000,21(6):65-68.

[3] Murin J. Some properties of a diesel drive line with hydrodynamic torque converters of the latest generation[J]. Mechanism and Machine Theory, 2005, 40(1): 99-117.

[4] 常绿,王国强,唐新星,等. 装载机发动机与液力变矩器功率匹配优化[J]. 农业机械学报,2006,37(11): 28-31. Chang Lü, Wang Guo-qiang, Tang Xin-xing, et al. Optimization of power matching on torque-converter with diesel engine for wheel loader[J]. Transactions of the Chinese Society for Agricultural Machinery, 2006, 37(11): 28-31.

[5] 常绿. 装载机发动机与液力变矩器功率匹配优化[J]. 农业机械学报,2010, 41(7): 25-29. Chang Lü. Optimization of power matching on torque-converter with diesel engine for wheel loader[J]. Transactions of the Chinese Society for Agricultural Machinery, 2010, 41(7): 25-29.

[6] 严明霞, 石博强. 基于盲数的柴油机与液力变矩器性能匹配计算[J]. 矿业快报,2006,11(11): 40-42. Yan Ming-xia, Shi Bo-qiang. Property matching calculation of diesel engine and hydraul ic torque converter based on indeterminate digit[J]. Express Information of Mining Industry, 2006, 11(11): 40-42.

[7] 李春芾, 陈慧岩, 陶刚,等. 发动机与液力变矩器匹配工作点算法研究[J]. 农业机械学报,2009,40(3): 11-15. Li Chun-fu, Chen Hui-yan, Tao Gang, et al. Arithmetic of the cooperating point of engine and torque converter[J]. Transactions of the Chinese Society for Agricultural Machinery, 2009, 40(3):11-15.

[8] 唐正华,闫清东,刘树成. 通用液力传动系统匹配方法[J]. 农业机械学报,2012,43(2): 26-30. Tang Zheng-hua, Yan Qing-dong, Liu Shu-cheng. General matching method for hydraulic transmission system[J]. Transactions of the Chinese Society for Agricultural Machinery, 2012,43(2):26-30.

[9] 常绿. 基于性能评价网状图的装载机发动机与液力变矩器匹配优化[J]. 农业工程学报,2012,28(1):50-54. Chang Lü. Optimization of power matching on torque-converter with diesel engine for wheel loader based on performance evaluation mesh figure[J]. Transactions of the Chinese Society of Agricultural Engineering, 2012, 28(1):50-54.

[10] 陈勇,陈潇凯, 林逸. 改进雷达图评价方法在汽车综合性能评价中的应用[J]. 吉林大学学报:工学版, 2011,41(6): 1522-1526. Chen Yong, Chen Xiao-kai, Lin Yi. Application of improved radar chart evaluation method on evaluation of automobile comprehensive performances[J]. Journal of Jilin University(Engineering and Technology Edition), 2011,41(6): 1522-1526.

[11] 李健成. 矿山装载机设计[M]. 北京: 机械工业出版社, 1985.

[12] Banuelas R, Antony J. Modified analytic hierarchy process to incorporate uncertainty and managerial aspects[J]. International Journal of Production Research, 2004, 42(18): 3851-3872.

[13] Elif D K, Zülal G. The usability analysis with heuristic evaluation and analytic hierarchy process[J]. International Journal of Industrial Ergonomics, 2009, 39(6): 934-939.

[1] 王芳荣, 郭柏苍, 金立生, 高琳琳, 岳欣羽. 次任务驾驶安全评价指标筛选及其权值计算[J]. 吉林大学学报(工学版), 2017, 47(6): 1710-1715.
[2] 王智远, 李国栋, 王勇华. 基于AHP-TOPSIS的桥梁设计方案优选决策模型[J]. 吉林大学学报(工学版), 2017, 47(2): 478-482.
[3] 李显生, 李明明, 任有, 严佳晖, 陈小夏. 城市不同道路线形下的驾驶人注视特性[J]. 吉林大学学报(工学版), 2016, 46(5): 1447-1452.
[4] 赵丁选, 王倩, 张祝新. 基于层次分析法的可拓学理论对舰载直升机可靠性的评估[J]. 吉林大学学报(工学版), 2016, 46(5): 1528-1531.
[5] 李欢利, 郭立红, 王心醉, 李小明, 董月芳, 方艳超. 基于加权Gabor滤波器的虹膜识别[J]. 吉林大学学报(工学版), 2014, 44(01): 196-202.
[6] 谭越, 马文星, 刘春宝. 冲焊型液力变矩器叶片成形的精密控制[J]. 吉林大学学报(工学版), 2013, 43(增刊1): 530-534.
[7] 雷雨龙, 刘振杰, 李兴忠, 付尧, 郑宏鹏. 起步工况下液力变矩器滑差控制转速优化[J]. 吉林大学学报(工学版), 2013, 43(06): 1447-1452.
[8] 王松林, 马文星, 胡晶, 褚亚旭, 宋建军. 双涡轮液力变矩器超越离合器的改进及分析[J]. 吉林大学学报(工学版), 2013, 43(04): 922-927.
[9] 谭越, 马文星, 卢秀泉. 基于流固耦合的冲焊型液力变矩器焊接强度分析[J]. 吉林大学学报(工学版), 2013, 43(04): 928-932.
[10] 刘树成, 魏巍, 闫清东, 周洽. 液力变矩器导轮空转特性无叶片数值仿真[J]. 吉林大学学报(工学版), 2013, 43(01): 22-27.
[11] 郝庆波, 杨兆军, 陈传海, 陈菲, 李国发. 基于区间层次分析法的数控机床可靠性预计[J]. , 2012, 42(04): 845-850.
[12] 申桂香, 邵娜, 张英芝, 何宇, 王晓峰. 基于可拓理论的数控机床顾客满意度评价[J]. 吉林大学学报(工学版), 2011, 41(增刊1): 164-167.
[13] 陈勇1,陈潇凯1,林逸1,2. 改进雷达图评价方法在汽车综合性能评价中的应用[J]. 吉林大学学报(工学版), 2011, 41(6): 1522-1526.
[14] 申桂香,邵娜,张英芝,何宇,郑锐,陈炳锟. 基于可拓学理论的数控机床可靠性评价[J]. 吉林大学学报(工学版), 2011, 41(01): 106-0109.
[15] 刘春宝,马文星,朱喜林,邓洪超. 基于椭圆循环圆的轿车扁平液力变矩器设计[J]. 吉林大学学报(工学版), 2010, 40(04): 1039-1043.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!