吉林大学学报(工学版)

• • 上一篇    下一篇

基于ANSYS/LS-DYNA的叶蜡石
传压性能的有限元分析

李瑞1,2,马红安2,尹斌华3,韩奇钢2,刘万强2,贾晓鹏2,3   

  1. 1.长春理工大学 材料科学与工程学院,长春 130012;2.吉林大学 超硬材料国家重点实验室,长春 130012;3.河南理工大学 材料科学与工程学院,河南 焦作 454000
  • 收稿日期:2006-12-14 修回日期:1900-01-01 出版日期:2008-03-01 发布日期:2008-03-01
  • 通讯作者: 贾晓鹏

Finite element analysis on pressuretransmitting behavior of
pyrophyllite block based on ANSYS/LS-DYNA

Li Rui1,2,Ma Hong-an2,Yin Bin-hua3,Han Qi-gang2,Liu Wan-qiang2,Jia Xiao-peng2,3   

  1. 1.Institute of Materials Science and Engineering,Changchun University of Science and Technology,Changchun 130012,China;2.National Lab of Superhard Materials,Jilin University,Changchun 130012,China;3.Institute of Materials Science and Engineering,He′nan Polytechnic University,He′nan Jiaozuo 454000,China
  • Received:2006-12-14 Revised:1900-01-01 Online:2008-03-01 Published:2008-03-01
  • Contact: Jia Xiao-peng

摘要: 利用有限元程序ANSYS/LSDYNA对六面顶压机加压方式下(压力范围在5.7 GPa以内)传压介质叶蜡石的形变过程进行了模拟,并在RMT150B型岩石力学伺服控制系统上测定了叶蜡石的弹塑性力学参数。给出了叶蜡石内部压力分布的数值分析结果,考察了焙烧温度对叶蜡石传压性能的影响。本研究结果对高温高压合成金刚石等超硬材料的传压介质材料的选取以及合成工艺的优化等方面具有重要的参考价值。

关键词: 材料合成与加工工艺, 六面顶压机, 叶蜡石, 压力分布, FEA, ANSYS/LS-DYNA

Abstract: The deformation process of the pressuretransmitting medium material pyrophyllite block in the pressure range of 5.7 GPa in a cubic high pressure apparatus was simulated by the finite element analysis(FEA) software ANSYS/LSDYNA. The related elasticplastic parameters were measured on a RMT150B rock mechanics servo control system. The numerical analysis results of the pressure distribution inside the pyrophyllite block were presented and the effect of the roasting temperature on the pressuretransmitting behavior of pyrophyllite was investigated. The obtained reaserch results is important for the selection of the pressuretransmitting medium material used in the synthesis of the superhard material such as diamond at highpressure and hightemperature and the optimization of the synthesis technology.

Key words: materials synthesis and processing technology, cubic highpressure apparatus, pyrophyllite, pressure distribution, FEA, ANSYS/LS-DYNA

中图分类号: 

  • TB303
[1] 姜秋月,杨海峰,檀财旺. 22MnB5超高强钢焊接接头强化性能[J]. 吉林大学学报(工学版), 2018, 48(6): 1806-1810.
[2] 胡志清, 颜庭旭, 李洪杰, 吕振华, 廖伟, 刘庚. 深冷处理对铝合金薄板冲剪成形性能的影响[J]. 吉林大学学报(工学版), 2018, 48(5): 1524-1530.
[3] 邱小明, 王银雪, 姚汉伟, 房雪晴, 邢飞. 基于灰色关联的DP1180/DP590异质点焊接头工艺参数优化[J]. 吉林大学学报(工学版), 2018, 48(4): 1147-1152.
[4] 陈俊甫, 管志平, 杨昌海, 牛晓玲, 姜振涛, 宋玉泉. 金属棒试样拉伸和扭转试验应变范围和力学特性对比[J]. 吉林大学学报(工学版), 2018, 48(4): 1153-1160.
[5] 梁晓波, 蔡中义, 高鹏飞. 夹芯复合板柱面成形的数值模拟及试验[J]. 吉林大学学报(工学版), 2018, 48(3): 828-834.
[6] 刘子武, 李剑峰. 叶片材料FV520B再制造熔覆层冲蚀损伤行为及评价[J]. 吉林大学学报(工学版), 2018, 48(3): 835-844.
[7] 刘纯国, 刘伟东, 邓玉山. 多点冲头主动加载路径对薄板拉形的影响[J]. 吉林大学学报(工学版), 2018, 48(1): 221-228.
[8] 张志强, 刘从豪, 何东野, 李湘吉, 李纪萱. 基于性能梯度分布的硼钢热冲压工艺对形状精度的影响[J]. 吉林大学学报(工学版), 2017, 47(6): 1829-1833.
[9] 吕萌萌, 谷诤巍, 徐虹, 李欣. 超高强度防撞梁热冲压成形工艺优化[J]. 吉林大学学报(工学版), 2017, 47(6): 1834-1841.
[10] 王辉, 周杰, 熊煜, 陶亚平, 向荣. 基于逆向工程的复杂曲面冲压件回弹补偿[J]. 吉林大学学报(工学版), 2017, 47(6): 1842-1847.
[11] 王春生, 邹丽, 杨鑫华. 基于邻域粗糙集的铝合金焊接接头疲劳寿命影响因素分析[J]. 吉林大学学报(工学版), 2017, 47(6): 1848-1853.
[12] 邢海燕, 葛桦, 李思岐, 杨文光, 孙晓军. 基于模糊隶属度最大似然估计的焊缝隐性缺陷磁记忆信号识别[J]. 吉林大学学报(工学版), 2017, 47(6): 1854-1860.
[13] 谷晓燕, 刘亚俊, 孙大千, 徐锋, 孟令山, 高帅. S355钢/6005A铝合金瞬间液相扩散连接接头组织与性能[J]. 吉林大学学报(工学版), 2017, 47(5): 1534-1541.
[14] 谷诤巍, 张文学, 吕萌萌, 王伟, 徐虹, 李欣. 宽翼边U型截面不锈钢型材拉弯成形缺陷控制[J]. 吉林大学学报(工学版), 2017, 47(4): 1165-1170.
[15] 寇淑清, 宋玮峰, 石舟. 36MnVS4连杆裂解加工模拟及缺陷分析[J]. 吉林大学学报(工学版), 2017, 47(3): 861-868.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!