吉林大学学报(工学版)

• • 上一篇    下一篇

ECAP变形2J4合金的显微组织和磁性能

杜忠泽1,魏法明1,符寒光2,伍来智1,王经涛1   

  1. 1.西安建筑科技大学 冶金工程学院,西安 710055; 2.北京工业大学 材料学院,北京 100022
  • 收稿日期:2006-11-20 修回日期:1900-01-01 出版日期:2008-03-01 发布日期:2008-03-01
  • 通讯作者: 杜忠泽

Microstructures and magnetic properties of 2J4 alloy deformed by ECAP

Du Zhong-ze1,Wei Fa-ming1,Fu Han-guang2,Wu Lai-zhi1,Wang Jing-tao1   

  1. 1.School of Metallurgical Engineering,Xi′an University of Architecture & Technology,Xi′an 710055,China; 2.School of Materials Science and Engineering,Beijing University of Technology,Beijing 100022,China
  • Received:2006-11-20 Revised:1900-01-01 Online:2008-03-01 Published:2008-03-01
  • Contact: Du Zhong-ze

摘要: 研究了等径弯曲通道变形(ECAP)对2J4合金显微组织和磁性能的影响。结果表明,2J4合金在室温下经A方式的ECAP变形后,组织明显细化,原有的奥氏体区部分转变为马氏体,且变形量越大,马氏体的质量分数越多。ECAP变形试样具有比冷轧试样更优异的磁滞性能,表现为更高的矫顽力、剩磁及更大的磁能积。ECAP变形为制备利用率高、成本低的高性能磁性材料提供了一种新途径。

关键词: 材料合成与加工工艺, 等径弯曲通道变形, 2J4合金, 马氏体, 细化, 磁性能

Abstract: The influence of Equal Channel Angular Pressing (ECAP) deformation on the microstructure and magnetic properties of a semimagnetic alloy,2J4,was studied.In the process,the sample is pressed from one pass to the next pass directly without rotation.Results show that the microstructures of 2J4 alloy deformed by ECAP at room temperature are obviously refined.Part of original austenite transforms into martensite,the larger the deformation,the higher the transformation fraction of martensite.The magnetic retardation performance of the specimen deformed by ECAP is better than that deformed by cold rolling with similar deformation.It has higher coercive force (Hc),remanence (Br) and larger magnetic energy (Pro).ECAP deformation is new approach for fabricating high performance magnetic materials with high material utilization and low production cost.

Key words: materials synthesis and processing technology, ECAP, 2J4 alloy, martensite, refinement, magnetic performance

中图分类号: 

  • TG132.2
[1] 尼颖升,孙启鑫,马晔,徐栋,刘超. 基于空间网格分析的多箱室波形钢腹板组合梁腹板剪力分配[J]. 吉林大学学报(工学版), 2018, 48(6): 1735-1746.
[2] 姜秋月,杨海峰,檀财旺. 22MnB5超高强钢焊接接头强化性能[J]. 吉林大学学报(工学版), 2018, 48(6): 1806-1810.
[3] 胡志清, 颜庭旭, 李洪杰, 吕振华, 廖伟, 刘庚. 深冷处理对铝合金薄板冲剪成形性能的影响[J]. 吉林大学学报(工学版), 2018, 48(5): 1524-1530.
[4] 邱小明, 王银雪, 姚汉伟, 房雪晴, 邢飞. 基于灰色关联的DP1180/DP590异质点焊接头工艺参数优化[J]. 吉林大学学报(工学版), 2018, 48(4): 1147-1152.
[5] 陈俊甫, 管志平, 杨昌海, 牛晓玲, 姜振涛, 宋玉泉. 金属棒试样拉伸和扭转试验应变范围和力学特性对比[J]. 吉林大学学报(工学版), 2018, 48(4): 1153-1160.
[6] 梁晓波, 蔡中义, 高鹏飞. 夹芯复合板柱面成形的数值模拟及试验[J]. 吉林大学学报(工学版), 2018, 48(3): 828-834.
[7] 刘子武, 李剑峰. 叶片材料FV520B再制造熔覆层冲蚀损伤行为及评价[J]. 吉林大学学报(工学版), 2018, 48(3): 835-844.
[8] 刘纯国, 刘伟东, 邓玉山. 多点冲头主动加载路径对薄板拉形的影响[J]. 吉林大学学报(工学版), 2018, 48(1): 221-228.
[9] 张志强, 刘从豪, 何东野, 李湘吉, 李纪萱. 基于性能梯度分布的硼钢热冲压工艺对形状精度的影响[J]. 吉林大学学报(工学版), 2017, 47(6): 1829-1833.
[10] 吕萌萌, 谷诤巍, 徐虹, 李欣. 超高强度防撞梁热冲压成形工艺优化[J]. 吉林大学学报(工学版), 2017, 47(6): 1834-1841.
[11] 王辉, 周杰, 熊煜, 陶亚平, 向荣. 基于逆向工程的复杂曲面冲压件回弹补偿[J]. 吉林大学学报(工学版), 2017, 47(6): 1842-1847.
[12] 王春生, 邹丽, 杨鑫华. 基于邻域粗糙集的铝合金焊接接头疲劳寿命影响因素分析[J]. 吉林大学学报(工学版), 2017, 47(6): 1848-1853.
[13] 邢海燕, 葛桦, 李思岐, 杨文光, 孙晓军. 基于模糊隶属度最大似然估计的焊缝隐性缺陷磁记忆信号识别[J]. 吉林大学学报(工学版), 2017, 47(6): 1854-1860.
[14] 谷晓燕, 刘亚俊, 孙大千, 徐锋, 孟令山, 高帅. S355钢/6005A铝合金瞬间液相扩散连接接头组织与性能[J]. 吉林大学学报(工学版), 2017, 47(5): 1534-1541.
[15] 谷诤巍, 张文学, 吕萌萌, 王伟, 徐虹, 李欣. 宽翼边U型截面不锈钢型材拉弯成形缺陷控制[J]. 吉林大学学报(工学版), 2017, 47(4): 1165-1170.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!