吉林大学学报(工学版) ›› 2010, Vol. 40 ›› Issue (03): 636-0639.

• 论文 • 上一篇    下一篇

精确细分式汽车底盘测功机惯性系统

徐观1,2,苏建1,李晓韬2,苏丽俐1,朱俊兰1   

  1. 1.吉林大学 交通学院|长春 130022|2.吉林大学 机械科学与工程学院|长春 130022
  • 收稿日期:2009-04-30 出版日期:2010-05-01 发布日期:2010-05-01
  • 通讯作者: 苏建(1954-),男,教授,博士生导师.研究方向:车辆智能化检测与诊断.E-mail:sujian@jlu.edu.cn E-mail:sujian@jlu.edu.cn
  • 作者简介:徐观(1981-),男,博士,博士后.研究方向:车辆智能化检测与诊断.E-mail:xuguan8131@hotmail.com
  • 基金资助:

    吉林省科技厅重点项目(20065007)

Precise and fractionized inertial system of automobile chassis dynamometer

XU Guan1, 2, SU Jian1, LI Xiao-tao2, SU Li-li1, ZHU Jun-lan1   

  1. 1.College of and Transportation, Jilin University, Changchun 130022,China;2.College of Mechanical Science and Engineering, Jilin University, Changchun 130022,China
  • Received:2009-04-30 Online:2010-05-01 Published:2010-05-01

摘要:

为提高汽车底盘测功机的检测精度,分析了惯性系统中飞轮组的选配原理。提出了基于质量倍增法的飞轮组分级原则,设计了9级飞轮组惯性系统,将模拟的质量区间500~10 000 kg分为512等级,精度达到±10 kg,实现了飞轮模拟质量与汽车质量的精确匹配。对飞轮进行了优化设计。研究了飞轮的制动方法,消除了检测过程中非工作飞轮的附加转动惯量,保证了检测结果的准确性。研发了惯性系统的试验样机,并通过对比试验验证了精确细分式惯性模拟系统的可行性和准确性。

关键词: 车辆工程, 汽车检测, 底盘测功机, 惯性系统, 精确细分法

Abstract:

The selection principle of flywheels in the inertial system of the automobile chassis dynamometer was analyzed to enhance its test accuracy. The gradation principle of flywheels was proposed based on the double multiplication method, and an inertial system with 9 steps of flywheel groups was designed, the simulative mass ranging 500~10 000 kg was divided into 512 levels with accuracy of ±10 kg. The accurate matching between the simulative flywheel mass and the tested automobile mass was realized. The optimal design of the flywheel was performed. The braking method of the flywheel was studied to remove the additional inertia moment from the inoperative flywheel in the test process, ensuring the accuracy of test results. An experimental prototype of the inertial system was developed. The feasibility and accuracy of the developed precise and fractionized inertial system were validated by comparative tests.

Key words: vehicle engineering, vehicle detection, chassis dynamometer, inertial system, precise and fractionized method

中图分类号: 

  • U472.9
[1] 常成,宋传学,张雅歌,邵玉龙,周放. 双馈电机驱动电动汽车变频器容量最小化[J]. 吉林大学学报(工学版), 2018, 48(6): 1629-1635.
[2] 席利贺,张欣,孙传扬,王泽兴,姜涛. 增程式电动汽车自适应能量管理策略[J]. 吉林大学学报(工学版), 2018, 48(6): 1636-1644.
[3] 何仁,杨柳,胡东海. 冷藏运输车太阳能辅助供电制冷系统设计及分析[J]. 吉林大学学报(工学版), 2018, 48(6): 1645-1652.
[4] 那景新,慕文龙,范以撒,谭伟,杨佳宙. 车身钢-铝粘接接头湿热老化性能[J]. 吉林大学学报(工学版), 2018, 48(6): 1653-1660.
[5] 刘玉梅,刘丽,曹晓宁,熊明烨,庄娇娇. 转向架动态模拟试验台避撞模型的构建[J]. 吉林大学学报(工学版), 2018, 48(6): 1661-1668.
[6] 赵伟强, 高恪, 王文彬. 基于电液耦合转向系统的商用车防失稳控制[J]. 吉林大学学报(工学版), 2018, 48(5): 1305-1312.
[7] 宋大凤, 吴西涛, 曾小华, 杨南南, 李文远. 基于理论油耗模型的轻混重卡全生命周期成本分析[J]. 吉林大学学报(工学版), 2018, 48(5): 1313-1323.
[8] 朱剑峰, 张君媛, 陈潇凯, 洪光辉, 宋正超, 曹杰. 基于座椅拉拽安全性能的车身结构改进设计[J]. 吉林大学学报(工学版), 2018, 48(5): 1324-1330.
[9] 那景新, 浦磊鑫, 范以撒, 沈传亮. 湿热环境对Sikaflex-265铝合金粘接接头失效强度的影响[J]. 吉林大学学报(工学版), 2018, 48(5): 1331-1338.
[10] 王炎, 高青, 王国华, 张天时, 苑盟. 混流集成式电池组热管理温均特性增效仿真[J]. 吉林大学学报(工学版), 2018, 48(5): 1339-1348.
[11] 金立生, 谢宪毅, 高琳琳, 郭柏苍. 基于二次规划的分布式电动汽车稳定性控制[J]. 吉林大学学报(工学版), 2018, 48(5): 1349-1359.
[12] 隗海林, 包翠竹, 李洪雪, 李明达. 基于最小二乘支持向量机的怠速时间预测[J]. 吉林大学学报(工学版), 2018, 48(5): 1360-1365.
[13] 王德军, 魏薇郦, 鲍亚新. 考虑侧风干扰的电子稳定控制系统执行器故障诊断[J]. 吉林大学学报(工学版), 2018, 48(5): 1548-1555.
[14] 胡满江, 罗禹贡, 陈龙, 李克强. 基于纵向频响特性的整车质量估计[J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
[15] 刘国政, 史文库, 陈志勇. 考虑安装误差的准双曲面齿轮传动误差有限元分析[J]. 吉林大学学报(工学版), 2018, 48(4): 984-989.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!