吉林大学学报(工学版) ›› 2015, Vol. 45 ›› Issue (5): 1488-1494.doi: 10.13229/j.cnki.jdxbgxb201505017

• • 上一篇    下一篇

多铆钉自冲铆接头力学性能机理

邢保英, 何晓聪, 王玉奇, 邓成江   

  1. 昆明理工大学 机电工程学院,昆明 650500
  • 收稿日期:2013-12-06 出版日期:2015-09-01 发布日期:2015-09-01
  • 通讯作者: 何晓聪(1955-),男,教授,博士.研究方向:薄板材料连接新技术.E-mail:xiaocong_he@126.com
  • 作者简介:邢保英(1986-）,女,博士研究生.研究方向:薄板材料连接新技术.E-mail:xbb0808@163.com
  • 基金资助:
    国家自然科学基金项目(50965009)

Mechanism of mechanical properties of self-piercing riveted joints with multiple rivets

XING Bao-ying, HE Xiao-cong, WANG Yu-qi, DENG Cheng-jiang   

  1. Faculty of Mechanical and Electrical Engineering, Kunming University of Science and Technology, Kunming 650500,China
  • Received:2013-12-06 Online:2015-09-01 Published:2015-09-01

RICH HTML

0   

PDF (PC)

284

摘要： 以3颗铆钉连接的5052铝合金自冲铆接头为对象,通过试验的方法研究多铆钉自冲铆接头力学性能机理。获得了m-o自冲铆接头(简称m-o接头)和m-i自冲铆接头(m-i接头)的静力学和疲劳试验数据,选择正态分布和二参数威布尔分布检验数据的有效性,通过最小二乘法获得疲劳寿命最佳拟合直线和疲劳载荷-疲劳寿命曲线二参数幂函数方程。结果表明:接头静态和疲劳失效形式分别为下板被拉出和下板断裂。铆钉分布结构对接头静强度、变形能力、能量吸收能力、疲劳寿命及它们的稳定性均有影响。m-i接头静力学性能良好,m-o接头整体具有良好的疲劳性能。疲劳测试中,铆钉分布结构会导致首要和次要承载顺序的产生,疲劳断口为首要承载顺序所在位置。

关键词: 材料合成与加工工艺, 多铆钉, 疲劳寿命, 变差系数, 断口分析

Abstract: The mechanism of mechanical properties of Self-piercing Riveted (SPR) joints of aluminum alloy 5052 sheet with three rivets was investigated by experiments. The static and fatigue experimental data of m-o SPR joint (m-o joint) and m-I SPR joint (m-I joint) were obtained. The effectiveness of the experimental data was tested by normal distribution and two-parameter Weibull distribution. The best-fitting straight line of fatigue lift and two-parameter power function equations of fatigue load-fatigue life curves were acquired by least square method. Results show that the static fatigue failure modes of the SPR joint are the pull-out and fracture of the lower sheet respectively. The static strength, capacity of deformation and energy absorption, fatigue life and their stability of SPR joints with multiple rivets are all influenced by the distribution structure of the rivets. The m-I joints have favorable static property, but the m-o joints have excellent fatigue property overall. During the fatigue test, the sequences of the primary and secondary load bearing are generated by the distribution structure of rivets, and the fatigue fracture surface is the location of the primary load bearing sequence.

Key words: materials synthesis and processing technology, multiple-rivet, fatigue life, coefficient of variation, fractographic analysis

中图分类号: 

  • TG447
[1] He X, Pearson I, Young K. Self-pierce riveting for sheet materials: state of the art[J].Journal of Material Processing Technology, 2008, 199(1-3): 27-36.
[2] He X, Gu F, Ball A. Recent development in finite element analysis of self-piercing riveted joints[J]. International Journal of Advanced Manufacturing Technology, 2012, 58(5-8): 643-649.
[3] Han L, Chrysanthou A, Young K W, et al. Characterization of fretting fatigue in self-piercing riveted aluminium alloy sheets[J]. Fatigue Fract Engng Master Struct, 2006, 29(8):646-654.
[4] Calabrese L, Bonaccorsi I, Proverbio E, et al. Durability on alternate immersion test of self-piercing riveting aluminium joint[J].Materials and Design, 2013, 46: 849-856.
[5] Fu M, Mallick P K. Fatigue of self-piercing riveted joints in aluminum alloy 6111[J]. International Journal of Fatigue, 2003, 25(3):183-189.
[6] Sun X, Stephens E V, Khaleel M A. Fatigue behaviors of self-piercing rivets joining similar and dissimilar sheet metals[J]. International Journal of Fatigue, 2007, 29(2):370-386.
[7] Hoang N H, Langseth M, Porcaro R, et al. The effect of the riveting process and aging on the mechanical behaviour of an aluminium self-piercing riveted connection[J].European Journal of Mechanics A/Solids, 2011, 30(5):619-630.
[8] 何晓聪, 何家宁, 柯建宏, 等.自冲铆接头的质量评价及强度可靠性预测[J].湖南大学学报:自然科学版, 2010, 37(12):1-4. He Xiao-cong, He Jia-ning, Ke Jian-hong, et al. Quality evaluation and strength reliability prediction of self-pierce riveted joints[J]. Journal of Hunan University(Natural Science), 2010, 37(12):1-4.
[9] He X. Coefficient of variation and its application to strength prediction of self-piercing riveted joints[J].Scientific Research and Essays, 2011(34):6850-6855.
[10] He X, Oyadiji S O. Application of coefficient of variation in reliability-based mechanical design and manufacture[J].Journal of Materails Processing Technology, 2001, 119(1-3): 374-378.
[11] Li D, Han L, Thornton M, et al. Influence of edge distance on quality and static behaviour of self-piercing riveted aluminum joints[J].Material and Design, 2012, 34: 22-31.
[12] Li D, Han L, Thorntom M, et al. Influence of rivet to sheet edge distance on fatigue strength of self-piercing riveted aluminum joints[J].Materials Science & Engineering A, 2012, 558: 242-252.
[13] Hoang N H, Hanssen A G, Langseth M, et al. Structural behaviour of aluminium self-piercing riveted joints: An experimental and numerical investigation[J].International Journal of Solids and Structures, 2012, 49(23-24): 3211-3223.
[14] Karbhari V M, Wang Q. Influence of triaxial braid denier on ribbon-based fiber reinforced dental compositers[J]. Dental Materials, 2007, 23(8):969-976.
[15] 高镇同, 傅惠民, 梁美训. S-N曲线拟合法[J].北京航空学院学报, 1987 (1): 115-119. Gao Zhen-tong, Fu Hui-min, Liang Mei-xun. A method for fitting S-N curve[J].Journal of Beijing University of Aeronautics and Astronautics, 1987 (1): 115-119.
[1] 姜秋月,杨海峰,檀财旺. 22MnB5超高强钢焊接接头强化性能[J]. 吉林大学学报(工学版), 2018, 48(6): 1806-1810.
[2] 毛宇泽, 王黎钦. 鼠笼支撑一体化结构对薄壁球轴承承载性能的影响[J]. 吉林大学学报(工学版), 2018, 48(5): 1508-1514.
[3] 胡志清, 颜庭旭, 李洪杰, 吕振华, 廖伟, 刘庚. 深冷处理对铝合金薄板冲剪成形性能的影响[J]. 吉林大学学报(工学版), 2018, 48(5): 1524-1530.
[4] 邱小明, 王银雪, 姚汉伟, 房雪晴, 邢飞. 基于灰色关联的DP1180/DP590异质点焊接头工艺参数优化[J]. 吉林大学学报(工学版), 2018, 48(4): 1147-1152.
[5] 陈俊甫, 管志平, 杨昌海, 牛晓玲, 姜振涛, 宋玉泉. 金属棒试样拉伸和扭转试验应变范围和力学特性对比[J]. 吉林大学学报(工学版), 2018, 48(4): 1153-1160.
[6] 梁晓波, 蔡中义, 高鹏飞. 夹芯复合板柱面成形的数值模拟及试验[J]. 吉林大学学报(工学版), 2018, 48(3): 828-834.
[7] 刘子武, 李剑峰. 叶片材料FV520B再制造熔覆层冲蚀损伤行为及评价[J]. 吉林大学学报(工学版), 2018, 48(3): 835-844.
[8] 刘纯国, 刘伟东, 邓玉山. 多点冲头主动加载路径对薄板拉形的影响[J]. 吉林大学学报(工学版), 2018, 48(1): 221-228.
[9] 张志强, 刘从豪, 何东野, 李湘吉, 李纪萱. 基于性能梯度分布的硼钢热冲压工艺对形状精度的影响[J]. 吉林大学学报(工学版), 2017, 47(6): 1829-1833.
[10] 吕萌萌, 谷诤巍, 徐虹, 李欣. 超高强度防撞梁热冲压成形工艺优化[J]. 吉林大学学报(工学版), 2017, 47(6): 1834-1841.
[11] 王辉, 周杰, 熊煜, 陶亚平, 向荣. 基于逆向工程的复杂曲面冲压件回弹补偿[J]. 吉林大学学报(工学版), 2017, 47(6): 1842-1847.
[12] 王春生, 邹丽, 杨鑫华. 基于邻域粗糙集的铝合金焊接接头疲劳寿命影响因素分析[J]. 吉林大学学报(工学版), 2017, 47(6): 1848-1853.
[13] 邢海燕, 葛桦, 李思岐, 杨文光, 孙晓军. 基于模糊隶属度最大似然估计的焊缝隐性缺陷磁记忆信号识别[J]. 吉林大学学报(工学版), 2017, 47(6): 1854-1860.
[14] 谷晓燕, 刘亚俊, 孙大千, 徐锋, 孟令山, 高帅. S355钢/6005A铝合金瞬间液相扩散连接接头组织与性能[J]. 吉林大学学报(工学版), 2017, 47(5): 1534-1541.
[15] 谷诤巍, 张文学, 吕萌萌, 王伟, 徐虹, 李欣. 宽翼边U型截面不锈钢型材拉弯成形缺陷控制[J]. 吉林大学学报(工学版), 2017, 47(4): 1165-1170.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
版权所有 © 《吉林大学学报(工学版)》编辑部
地址：长春市人民大街5988号　电话：+86-431-85095297　传真：+86-431-85094074　E-mail: xbgxb@jlu.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发