吉林大学学报(工学版) ›› 2017, Vol. 47 ›› Issue (6): 1848-1853.doi: 10.13229/j.cnki.jdxbgxb201706024

• 论文 • 上一篇    下一篇

基于邻域粗糙集的铝合金焊接接头疲劳寿命影响因素分析

王春生1, 2, 邹丽3, 杨鑫华2   

  1. 1.中车长春轨道客车股份有限公司 工程技术中心,长春 130062;
    2.大连交通大学 材料科学与工程学院, 辽宁 大连 116028;
    3.大连交通大学 软件学院,辽宁 大连 116028
  • 收稿日期:2016-11-20 出版日期:2017-11-20 发布日期:2017-11-20
  • 通讯作者: 杨鑫华(1969-),男,教授,博士.研究方向:焊接结构可靠性.E-mail:yangxhdl@foxmail.com
  • 作者简介:王春生(1965-),男,教授,博士生导师.研究方向:焊接过程控制.E-mail:wangchunsheng@cccar.com.cn
  • 基金资助:
    国家自然科学基金项目(51175054); 辽宁省自然科学基金项目(2015020169)

Analysis of fatigue life factors of aluminum alloy welded joints based on neighborhood rough set theory

WANG Chun-sheng1, 2, ZOU Li3, YANG Xin-hua2   

  1. 1.Engineering and Technology Center,CRRC Changchun Railway Vehicles Co., Ltd., Changchun 130062,China;
    2.School of Materials Science and Engineering,Dalian Jiaotong University,Dalian 116028,China;
    3.Software Institute,Dalian Jiaotong University,Dalian 116028,China
  • Received:2016-11-20 Online:2017-11-20 Published:2017-11-20

RICH HTML

0   

PDF (PC)

85

摘要： 针对经典粗糙集只能处理连续型数据的不足,引入邻域粗糙集理论对铝合金焊接接头疲劳寿命影响因素进行分析,建立既能处理符号型又能处理数值型属性变量的统一邻域粗糙集模型。运用前向贪心和后向剪枝相结合的算法进行属性约简,获取影响接头疲劳寿命的核心因素集,并定量计算各影响因素的权重。实验结果表明:所建立的邻域粗糙集模型不需要先验知识,可从疲劳样本数据本身出发得到铝合金焊接接头疲劳寿命各影响因素的客观评定,能够选择少量的特征。

关键词: 材料合成与加工工艺, 邻域粗糙集, 焊接接头, 疲劳寿命

Abstract: To sole the problem that classical rough set theory can only deal with continuous data, neighborhood rough set theory is employed to analyze the factors that influence the fatigue life of the welded joints. A unified neighborhood rough set model is proposed, which can handle both symbolic and numeric attributes. Attribute reduction algorithm combining forward greedy algorithm and backward pruning algorithm is used to obtain the key factors and to quantitatively calculate the weights of the factors influencing the fatigue life of the welded joints. Experiment results of aluminum alloy welded joints show that the proposed neighborhood rough set model can choose a small number of features and obtain an objective evaluation of various influence factors from the sample data of the aluminum alloy welded joints without any priori knowledge.

Key words: material synthesis and processing technology, neighborhood rough set, welded joints, fatigue life

中图分类号: 

  • TG409
[1] Iqbal M, Shaikht M A, Ahmad M, et al. Ageing effect on hardness and microstructure of Al-Zn-Mg alloys[J]. Journal of Materials Science and Technology,2000,16(3):319-322.
[2] Shimizu K, Torii T, Ma Y L. Crack opening sliding morphology and stress intensity factor of slant fatigue crack[J]. Key Engineering Materials,2005,297-300:697-702.
[3] 孟广伟,李锋,赵云亮. 基于随机有限元法的疲劳断裂可靠性分析[J]. 吉林大学学报:工学版,2006,36(增刊1):16-19.
Meng Guang-wei, Li Feng, Zhao Yun-liang. Reliability analysis of fatigue and fracture based on stochastic finite element method[J]. Journal of Jilin University(Engineering and Technology Edition),2006,36(Sup.1):16-19.
[4] 闫楚良,郝云霄,刘克格. 基于遗传算法优化的BP神经网络的材料疲劳寿命预测[J]. 吉林大学学报:工学版,2014,44(6):1710-1715.
Yan Chu-liang,Hao Yun-Xiao,Liu Ke-ge. Fatigue life prediction of materials based on BP neural networks optimized by genetic algorithm[J]. Journal of Jilin University (Engineering and Technology Edition),2014,44(6):1710-1715.
[5] 邹丽,杨鑫华,孙屹博,等. 基于变精度粗糙集的铝合金焊接接头疲劳寿命预[J]. 焊接学报,2013,34(4):65-68.
Zou Li, Yang Xin-hua, Sun Yi-bo, et al. Fatigue life prediction of aluminum alloy welded joint based on variable precision rough set[J]. Transactions of the China Welding Institution, 2014,34(4):65-68.
[6] Yang Xin-hua, Zou Li, Deng Wu. Fatigue life prediction for welding components based on hybrid intelligent technique[J]. Material Science and Engineering A,2015,642:235-261.
[7] Pawlak Z.Rough sets[J]. International Journal of Computer and Information Sciences,1982,11(5):341-356.
[8] 王国胤,姚一豫,于洪. 粗糙集理论与应用研究综述[J]. 计算机学报,2009,32(7):1229-1246.
Wang Guo-yin, Yao Yi-yu, Yu Hong. A survey on rough set theory and applications[J]. Chinese Journal of Computers,2009,32(7):1229-1246.
[9] 王国胤,张清华,马希骜,等. 知识不确定性问题的粒计算模型[J]. 软件学报,2011,22(4):676-694.
Wang Guo-yin, Zhang Qing-hua, Ma Xi-ao, et al. Granular computing models for knowledge uncertainty[J]. Journal of Software,2011,22(4):676-694.
[10] He Q, Wu C X, Chen D G, et al. Fuzzy rough set based attribute reduction for information system with fuzzy decisions[J]. Knowledge-Based Systems,2011,24(5):689-696.
[11] Parthaláin N M, Shen Q. Exploring the boundary region of tolerance rough sets for feature selection[J]. Pattern Recognition,2009,42(5):655-667.
[12] Li Wei-wei, Huang Zhi-qiu, Jia Xiu-yi, et al. Neighborhood based decision-theoretic rough set models[J]. International Journal of Approximate Reasoning,2016,69:1-17.
[13] 赵佰亭,陈希军,曾庆双. 不完备模糊混合决策系统的邻域粗糙集分析方法[J]. 吉林大学学报:工学版,2011,41(3):721-727.
Zhao Bai-ting, Chen Xi-jun, Zeng Qing-shuang. Approach for incomplete fuzzy hybrid decision system on neighborhood rough set[J]. Journal of Jilin University(Engineering and Technology Edition),2011,41(3):721-727.
[14] Sidhom N, Larrmouri A, Fathallah R, et al. Fatigue strength improvement of 5083H11 Al-alloy T-welded joints by shot peening: experimental characterization and predictive approach[J]. International Journal of Fatigue,2005,27(7):729-745.
[15] Sidhom N, Braham C, Lieurade H P. Fatigue life evaluation of shot peened Al-alloy 5083H11 T-welded joints by experimental and numerical approaches[J]. Welding in the World,2007,51(1):50-57.
[16] Beretta S, Sala G. A model for fatigue strength of welded lap joints[J]. Fatigue & Fracture Engineering Materials & Structures,2005,28(1/2):257-264.
[17] da Cruz J A M P, Costaa J D M, Borrego L F P, et al. Fatigue life prediction in AlMgSi1 lap joint weldments[J]. International Journal of Fatigue,2000,22(7):601-610.
[1] 姜秋月,杨海峰,檀财旺. 22MnB5超高强钢焊接接头强化性能[J]. 吉林大学学报(工学版), 2018, 48(6): 1806-1810.
[2] 毛宇泽, 王黎钦. 鼠笼支撑一体化结构对薄壁球轴承承载性能的影响[J]. 吉林大学学报(工学版), 2018, 48(5): 1508-1514.
[3] 胡志清, 颜庭旭, 李洪杰, 吕振华, 廖伟, 刘庚. 深冷处理对铝合金薄板冲剪成形性能的影响[J]. 吉林大学学报(工学版), 2018, 48(5): 1524-1530.
[4] 邱小明, 王银雪, 姚汉伟, 房雪晴, 邢飞. 基于灰色关联的DP1180/DP590异质点焊接头工艺参数优化[J]. 吉林大学学报(工学版), 2018, 48(4): 1147-1152.
[5] 陈俊甫, 管志平, 杨昌海, 牛晓玲, 姜振涛, 宋玉泉. 金属棒试样拉伸和扭转试验应变范围和力学特性对比[J]. 吉林大学学报(工学版), 2018, 48(4): 1153-1160.
[6] 梁晓波, 蔡中义, 高鹏飞. 夹芯复合板柱面成形的数值模拟及试验[J]. 吉林大学学报(工学版), 2018, 48(3): 828-834.
[7] 刘子武, 李剑峰. 叶片材料FV520B再制造熔覆层冲蚀损伤行为及评价[J]. 吉林大学学报(工学版), 2018, 48(3): 835-844.
[8] 刘纯国, 刘伟东, 邓玉山. 多点冲头主动加载路径对薄板拉形的影响[J]. 吉林大学学报(工学版), 2018, 48(1): 221-228.
[9] 张志强, 刘从豪, 何东野, 李湘吉, 李纪萱. 基于性能梯度分布的硼钢热冲压工艺对形状精度的影响[J]. 吉林大学学报(工学版), 2017, 47(6): 1829-1833.
[10] 吕萌萌, 谷诤巍, 徐虹, 李欣. 超高强度防撞梁热冲压成形工艺优化[J]. 吉林大学学报(工学版), 2017, 47(6): 1834-1841.
[11] 王辉, 周杰, 熊煜, 陶亚平, 向荣. 基于逆向工程的复杂曲面冲压件回弹补偿[J]. 吉林大学学报(工学版), 2017, 47(6): 1842-1847.
[12] 邢海燕, 葛桦, 李思岐, 杨文光, 孙晓军. 基于模糊隶属度最大似然估计的焊缝隐性缺陷磁记忆信号识别[J]. 吉林大学学报(工学版), 2017, 47(6): 1854-1860.
[13] 谷晓燕, 刘亚俊, 孙大千, 徐锋, 孟令山, 高帅. S355钢/6005A铝合金瞬间液相扩散连接接头组织与性能[J]. 吉林大学学报(工学版), 2017, 47(5): 1534-1541.
[14] 谷诤巍, 张文学, 吕萌萌, 王伟, 徐虹, 李欣. 宽翼边U型截面不锈钢型材拉弯成形缺陷控制[J]. 吉林大学学报(工学版), 2017, 47(4): 1165-1170.
[15] 寇淑清, 宋玮峰, 石舟. 36MnVS4连杆裂解加工模拟及缺陷分析[J]. 吉林大学学报(工学版), 2017, 47(3): 861-868.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
版权所有 © 《吉林大学学报(工学版)》编辑部
地址：长春市人民大街5988号　电话：+86-431-85095297　传真：+86-431-85094074　E-mail: xbgxb@jlu.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发