Journal of Jilin University(Engineering and Technology Edition) ›› 2019, Vol. 49 ›› Issue (3): 897-902.doi: 10.13229/j.cnki.jdxbgxb20180926

Previous Articles     Next Articles

Compression mechanical properties and fracture mechanism of Scapharca Subcrenata shell

Na WU1(),Jian ZHUANG2,Ke⁃song ZHANG1,Hui⁃xin WANG2,Yun⁃hai MA2()   

  1. 1. College of Automotive Engineering, ShanDong Jiaotong University, Jinan 250023, China
    2. Key Laboratory of Bionic Engineering, Ministry of Education, Jilin University, Changchun 130022, China
  • Received:2018-09-12 Online:2019-05-01 Published:2019-07-12
  • Contact: Yun?hai MA E-mail:wuna1978@163.com;myh@jlu.edu.cn

RICH HTML

 2   

PDF (PC)

201

Abstract:

The clamshell was used as the research object, and three types of clamshells under different water conditions were carried out by mechanical testing machine,including of the fresh, soaked and dry shells.Based on the experimental data of bearing pressure and the crack characteristics and microstructure of shell, the whole bearing pressure characteristics and fracture law of clamshell surface were analyzed. The results showed that the pressure performance of the shell surface is the best in the fresh body. The mechanical properties in soaked bodies decreased because of the loss of the organic matter after the soaking. The compression capacity declined sharply when the shell was dry.The reason was that the water lost in the shell body and the organic matter dried up. the shell crack propagation and shell crack change were different in the three states. This study will provide important reference value for the study of mechanical properties and biomimetic application of shell surfaces.

Key words: engineering bionics, shell surface, load pressure, mechanical properties, fracture mechanism

CLC Number: 

  • TB17

Fig.1

The shell of Scapharca subcrenata "

Fig.2

"

Table 1

Coefficients of bearing load?deformation equations fitted and their evaluating parameters"

方程参数 试验贝壳状态
鲜 体 浸 泡 体 干 体
a 118.05 177.25 86.12
b 1 22270.40 51037.31 25586.46
b 2 1.97 -1.41 -1.87
b 3 -3.83 3.09 4.98
b 4 2.37 -1.76 3.12
R 2 0.9997 0.9998 0.9957

Fig.3

"

Table 2

Relations of mean bearing load and deformations of shell"

承压载荷/N 贝壳承压形变量 /mm
鲜体 浸泡体 干体
200 0.045 0.014 0.178
300 0.085 0.098 0.223
500 0.179 0.184 None

Fig.4

"

Fig.5

External and internal cracks of different states Scapharca subcrenata shells"

Fig.6

"

1 马云海,刘玉成,彭杰,等 . 环文蛤角质层与棱柱层结合特性研究[J]. 农业机械学报，2013，44（增刊1）：297⁃300.
Ma Yun⁃hai ， Liu Yu⁃cheng , Peng Jie , et al . Binding characteristics of cuticle and prism Layer of cyclina sinensis[J]. Transactions of the Chinese Society for Agricultural Machinery, 2013,44(Sup.1)：297⁃300.
2 Bruet B J F , Qi H J , Boyce M C , et al . Nanoscale morphology and indentation of individual nacre tablets from the gastropod mollusc trochus niliticus[J].Journal of Materials Research, 2005,20(9)：2400⁃2419.
3 Sun J Y ， Bhushan B . Hierarchical structure and mechanical properties of nacre: a review[J]. RSC Advances，2012,2(20)：7617⁃7632.
4 Tian X M , Han Z W , Li X J , et al . Biological coupling anti⁃wear properties of three typical molluscan shell⁃Scapharca subcrenata, Rapana venosa, Acanthochiton rubrolineatus[J]. Science China Technological Science, 2010,53(11): 2905⁃2913.
5 Xia S , Wang Z N ， Chen H ，et al . Nanoasperity: structure origin of nacre⁃inspired nanocom⁃ posites[J].ACS Nano,2015, 9(2):2167⁃2172.
6 Zlotnikov Igor , Schoeppler Vanessa .Thermodynamic aspects of molluscan shell ultrastructural morphogenesis[J]. Advanced Functional Material, 2017,27(28):1⁃14.
7 Suzuki Michio , Nagasawa Hiromichi . Mollusk shell structures and their formation mechanism[J]. Canadian Journal of Zoology⁃Revue Canadienne De Zoologie, 2013,91(6):349⁃366.
8 Mao L B , Gao H L , Yao H B , et al . Synthetic nacre by predesigned matrix⁃directed mineralization[J]. Science, 2016, 354(6308):107⁃110.
9 Cheng Q F , Jiang L , Tang Z Y . Bioinspired layered materials with superior mechanical performance[J]. Accounts of Chemical Research, 2014,47(4):1256⁃1266.
10 Duan J L , Gong S S , Gao Y ,et al . Bioinspired ternary artificial nacre nanocomposites based on reduced graphene oxide and nanofibrillar cellulose[J]. ACS Applied Materials & Interfaces, 2016, 8 (16):10545–10550.
11 Jackson A P , Vincent J F V , Ihrner R M . The mechanical design of nacre[J]. Proceedings of the Royal Society of London, 1988,234(1277):415⁃440.
12 Barthelat F , Tang H , Zavattieri P D , et al . On the mechanics of mother⁃of⁃pearl:A key feature in the material hierarchical structure[J]. Journal of the Mechanics & Physics of Solids, 2007,55(2):306⁃337.
13 Barthelat F , Espinosa H D . Mechanical properties of nacre constituents:an inverse method approach in mechanical properties of bioinspired and biological materials[J]. Materials Research Society Proceedings, 2004, 844: 67⁃78.
14 田喜梅 .典型贝类壳体生物耦合特性及其仿生耐磨研究[D]. 长春：吉林大学生物与农业工程学院，2013.
Tian Xi⁃mei . Biological coupling and bionic anti⁃wear properties of typical molluscan shells[D]. Changchun: College of Biological and Agricultural Engineering, Jilin University, 2013.
15 Albert L ， Marc A M . Growth and structure in abalone shell[J]. Material Science and Engineering:A, 2005,390(1/2): 27⁃41.
[1] XI Peng,CONG Qian,WANG Qing-bo,GUO Hua-xi. Wear test and anti-friction mechanism analysis of bionic stripe grinding roll [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1787-1792.
[2] GUO Hao-tian,XU Tao,LIANG Xiao,YU Zheng-lei,LIU Huan,MA Long. Optimization on thermal surface with rib turbulator inspired by turbulence of alopias' gill in simplified gas turbine transition piece [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1793-1798.
[3] JIANG Qiu-yue,YANG Hai-feng,TAN Cai-wang. Strengthening properties of welded joints of 22MnB5 super high strength steel [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1806-1810.
[4] QIAN Zhi-hui, ZHOU Liang, REN Lei, REN Lu-quan. Completely passive walking machine with bionic subtalar joint and matatarsal phalangeal joint [J]. 吉林大学学报(工学版), 2018, 48(1): 205-211.
[5] GE Chang-jiang, YE Hui, HU Xing-jun, YU Zheng-lei. Prediction and control of trailing edge noise on owl wings [J]. 吉林大学学报(工学版), 2016, 46(6): 1981-1986.
[6] LI Meng, SU Yi-nao, SUN You-hong, GAO Ke. High matrix bionic abnormal shape impregnated diamond bit [J]. 吉林大学学报(工学版), 2016, 46(5): 1540-1545.
[7] LIANG Yun-hong, REN Lu-quan. Preliminary study of habitat and its bionics [J]. 吉林大学学报(工学版), 2016, 46(5): 1746-1756.
[8] LIANG Yun-hong, REN Lu-quan. Preliminary study of bionics in human life [J]. 吉林大学学报(工学版), 2016, 46(4): 1373-1384.
[9] QIAN Zhi-hui, MIAO Huai-bin, REN Lei, REN Lu-quan. Lower limb joint angles of German shepherd dog during foot-ground contact in different gait patterns [J]. 吉林大学学报(工学版), 2015, 45(6): 1857-1862.
[10] ZOU Meng, YU Yong-jun, ZHANG Rong-rong, WEI Can-gang, WANG Hui-xia. Simulation analysis of energy-absorption properties of thin-wall tube based on horn structure [J]. 吉林大学学报(工学版), 2015, 45(6): 1863-1868.
[11] YANG Zhuo-juan, WANG Qing-cheng, GAO Ying, MEN Yu-zhuo, YANG Xiao-dong. Effect of different solutions on the wettability of lotus leaves [J]. 吉林大学学报(工学版), 2015, 45(6): 1869-1873.
[12] TIAN Wei-jun, WANG Ji-yue1, LI Ming1, CHEN Si-yuan, LIU Fang-yuan, CONG Qian. Bionic design of the small blade of horizontal axis wind turbines [J]. 吉林大学学报(工学版), 2015, 45(5): 1495-1501.
[13] TIAN Gui-zhong, LIU Zhi-ling, ZHOU Hong-gen, SONG Jiang-chao, ZHU Tao. Quasi-static axial tensile mechanical characteristics of silkworm's anterior silk gland [J]. 吉林大学学报(工学版), 2015, 45(3): 872-877.
[14] DENG Cheng-jiang, HE Xiao-cong, XING Bao-ying, WANG Yu-qi, ZENG Kai, DING Yan-fang. Mechanical properties of self-piercing riveted lap joints in dissimilar metal sheets of aluminum and copper [J]. 吉林大学学报(工学版), 2015, 45(2): 473-480.
[15] DUAN Xing-wang,LIU Jian-sheng. Plasticity at elevated temperature and fracture character of 316LN steel [J]. 吉林大学学报(工学版), 2015, 45(2): 494-500.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] Zheng Wen-zhong，Zhang Ge-ming，Liu Xu-dong，Zhang Bo-yi . Experiment on cave-in ultimate bearing capacity of grouted-square-steel tube[J]. 吉林大学学报(工学版), 2007, 37(04): 794 -799 .
[2] HAN Xiao-mei, LIN Xue-dong, LI De-gang, LI Chuang. Injection quantity control strategy for starting to idling transition of light duty diesel engine[J]. 吉林大学学报(工学版), 2016, 46(4): 1103 -1108 .
[3] Zhang Fu，Zhao Ji，Zhuang Yan . Polishing of optical glass surface by hydrodynamic suspension[J]. 吉林大学学报(工学版), 2007, 37(03): 544 -0547 .
[4] ZHU Bing, REN Lu-quan, ZHAO Jian, LI You-de. Integrated vehicle chassis control of active steering and active braking using the inverse nyquist array method[J]. 吉林大学学报(工学版), 2011, 41(增刊2): 41 -46 .
[5] LI Qi, MA Jian-feng, XIONG Jin-bo,ZHANG Tao,LIU Xi-meng. Attribute-based encryption based access control scheme withconstant-size ciphertext in cloud computing[J]. 吉林大学学报(工学版), 2014, 44(3): 788 -794 .
[6] DONG Kai, LIU Yu, WANG Hai-peng. Grey track anti-bias association algorithm based on centroid topology of reference[J]. 吉林大学学报(工学版), 2015, 45(4): 1311 -1317 .
[7] LU Ying, WANG Hui-qin, QIN Li-ke. Accurate fire location method in high and large-span space buildings[J]. 吉林大学学报(工学版), 2016, 46(6): 2067 -2073 .
[8] LIU Hong-xi, SUN Jun-xi, SUN Hong-bin, LIU Guang-wen. Exemplar bidirectional matching algorithm for image inpainting[J]. 吉林大学学报(工学版), 2016, 46(6): 2111 -2115 .
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd