吉林大学学报(工学版) ›› 2003, Vol. ›› Issue (1): 69-72.
Previous Articles Next Articles
GENG De-xu1, ZHANG Da-wei2, XU Yan-shen2, YANG Bin-jiu 1
CLC Number:
| [1] 徐芝纶.弹性力学［M］.北京:人民教育出版社,1982. [2] 圆锯片热变形的研究(一)［J］.林洪杰译.木工机床,1992,4:9～17. [3] Schajor G S,Mote C D Jr..Analysis of optimal roll tensioning for circular saw stability［J］.Wood and Fiber,1984,16(3):323～338. [4] 圆锯片适张度［J］.徐晶译.木工机床,1990,4:27～31. [5] Γ.C皮萨连科.材料力学手册［M］.北京:中国建筑工业出版社,1982. [6] 耿德旭.辊压适张度对圆锯片动态性能及锯切稳定性影响的研究［D］.天津:天津大学机械工程系,1994. [7] 张大卫.圆锯片锯切过程稳定性及适张度设计方法研究［D］.天津:天津大学机械工程系,1995. |
| [1] | JIA Tuo,ZHAO Ding-xuan,CUI Yu-xin. Method of rollover pre-warning for articulated loader [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1762-1769. |
| [2] | ZHAO Wei-qiang, GAO Ke, WANG Wen-bin. Prevention of instability control of commercial vehicle based on electric-hydraulic coupling steering system [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1305-1312. |
| [3] | JIN Li-sheng, XIE Xian-yi, GAO Lin-lin, GUO Bai-cang. Distributed electric vehicle stability control based on quadratic programming [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1349-1359. |
| [4] | QIN Jing, XU He, PEI Yi-qiang, ZUO Zi-nong, LU Li-li. Influence of initial temperature and initial pressure on premixed laminar burning characteristics of methane-dissociated methanol flames [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1475-1482. |
| [5] | WANG De-jun, WEI Wei-li, BAO Ya-xin. Actuator fault diagnosis of ESC system considering crosswind interference [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1548-1555. |
| [6] | YAN Dong-mei, ZHONG Hui, REN Li-li, WANG Ruo-lin, LI Hong-mei. Stability analysis of linear systems with interval time-varying delay [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1556-1562. |
| [7] | GONG Xun, JIANG Bing-jing, HU Yun-feng, QU Ting, CHEN Hong. Design and analysis of nonlinear state observer for master-slave two cell Urea-SCR system of diesel engine [J]. 吉林大学学报(工学版), 2018, 48(4): 1055-1062. |
| [8] | CHEN Dong-hui, LYU Jian-hua, LONG Gang, ZHANG Yu-chen, CHANG Zhi-yong. Static rollover stability of semi-mounted agricultural machinery based on ADAMS [J]. 吉林大学学报(工学版), 2018, 48(4): 1176-1183. |
| [9] | LI Ming-yang, MA Biao, LI He-yan, DU Qiu, YU Liang, CHEN Fei. Influence of radial thermal stresses on buckling deformation of separator discs in multi-disc clutches [J]. 吉林大学学报(工学版), 2018, 48(1): 83-88. |
| [10] | GONG Ya-feng, HE Yu-long, TAN Guo-jin, SHEN Yang-fan. Anti-overturning stability analysis for three-span continuous curved girder bridge with single column pier [J]. 吉林大学学报(工学版), 2018, 48(1): 133-140. |
| [11] | HE Ren, CHEN Shan-shan. Braking stability of tractor-semitrailer based on gear-shifting strategy of hydraulic retarder [J]. 吉林大学学报(工学版), 2017, 47(6): 1677-1687. |
| [12] | LUO Rong, ZENG Zhe, ZHANG De-run, FENG Guang-le, DONG Hua-jun. Moisture stability evaluation of asphalt mixture based on film pressure model of Wilhelmy plate method [J]. 吉林大学学报(工学版), 2017, 47(6): 1753-1759. |
| [13] | TANG Hua-guo, MA Xian-feng, ZHAO Wei, LIU Jian-wei, ZHAO Zhen-ye. Synthesis microstructure and thermal properties of high performance bulk Al [J]. 吉林大学学报(工学版), 2017, 47(5): 1542-1547. |
| [14] | LIN Jun, ZHAO Yue, JIANG Chuan-dong, WANG Ying-ji. New surface MRS method based on optimized Block inversion [J]. 吉林大学学报(工学版), 2017, 47(2): 530-539. |
| [15] | ZHAO Jing-hua, HU Yun-feng, GAO Bing-zhao, CHEN Hong. Design of nonlinear reduced-order observer for ammonia coverage based on urea-SCR systems [J]. 吉林大学学报(工学版), 2017, 47(2): 583-590. |
|
||