吉林大学学报(工学版) ›› 2017, Vol. 47 ›› Issue (2): 583-590.doi: 10.13229/j.cnki.jdxbgxb201702033
Previous Articles Next Articles
ZHAO Jing-hua1, 2, 3, HU Yun-feng1, 3, GAO Bing-zhao1, CHEN Hong1, 3
CLC Number:
[1] 赵靖华,胡云峰,陈虹,等. 基于“三步法”的柴油机urea-SCR 系统控制设计[J]. 吉林大学学报:工学版,2015,45(6): 1913-1923. Zhao Jing-hua, Hu Yun-feng, Chen Hong, et al. Design of diesel engine's urea-SCR system controller using triple-step method[J]. Journal of Jilin University(Engineering and Technology Edition), 2015,45(6): 1913-1923. [2] Guzzella L, Onder C H. Introduction to Modeling and Control of Internal Combustion Engine Systems[M].Switzerland: Springer, 2010. [3] Johnson T V. Diesel emission control in review[J]. SAE Int J Fuels Lubr, 2009, 2(1): 1-12. [4] Hsieh M F, Wang J, Canova M. Two-level nonlinear model predictive control for lean NO x trap regenerations[J]. Journal of Dynamic Systems, Measurement, and Control,2010, 132(4): 041001. [5] Wu H, Mizukami K. Exponential stability of a class of nonlinear dynamical systems with uncertainties[J]. Systems & Control Letters, 1993, 21(4): 307-313. [6] 王谦,张铎,王静,等. 车用柴油机 Urea-SCR 系统数值分析与参数优化[J].内燃机学报, 2013, 31(4):343-348. Wang Qian, Zhang Duo, Wang Jing, et al. Numerical analysis and parametric optimization on urea-SCR system of vehicle diesel[J]. Transactions of CSICE, 2013, 31(4):343-348. [7] Chiang C J, Kuo C L, Huang C C, et al. Model predictive control of SCR aftertreatment system[C]∥IEEE Conference on Industrial Electronics and Applications, Taichung,2010: 2058-2063. [8] Zhao J, Yang T L, Lu G Y. Enhancement of NO 2 gas sensing response based on ordered mesoporous fe-doped In 2 O 3 [J]. Sensors and Actuators B, 2014, 191: 806-812. [9] Devarakonda M, Parker G, Johnson J H, et al. Model-based estimation and control system development in a urea-SCR aftertreatment system[J]. SAE International Journal of Fuels and Lubricants, 2008, 1(1): 646-661. [10] 侯洁,颜伏伍,胡杰,等. Urea-SCR系统NO x 传感器的NH 3 交叉感应研究[J]. 内燃机学报,2014,32(3): 249-253. Hou Jie, Yan Fu-wu, Hu Jie, et al. Ammonia cross-sensitivity of NO x sensor for urea-SCR system[J]. Transactions of CSICE, 2014,32(3): 249-253. [11] Devarkonda M, Parker G, Johnson J H. Model-based control system design in a urea-SCR aftertreatment system based on NH 3 sensor feedback[J]. International Journal of Automotive Technology, 2009, 10(6): 653-662. [12] Hsieh M, Wang J. Diesel engine selective catalytic reduction ammonia surface coverage control using a computationally-efficient model predictive control assisted method[C]∥Proceedings of the ASME Dynamic Systems and Control Conference, 2009: 865-872. [13] Hsieh M F, Wang J. Backstepping based nonlinear ammonia surface coverage ratio control for diesel engine selective catalytic reduction systems[C]∥ASME 2009 Dynamic Systems and Control Conference,Hollywood,CA,2009: 889-896. [14] Hsieh M, Wang J. A two-cell backstepping-based control strategy for diesel engine selective catalytic reduction systems[J]. IEEE Transactions on Control Systems Technology, 2011, 19(6): 1504-1515. [15] Zhang H, Wang J, Wang Y Y. Robust filtering for ammonia coverage estimation in diesel engine selective catalytic reduction systems[J]. Journal of Dynamic Systems, Measurement, and Control, 2013, 135(6): 1504-1515. [16] Bonfils A, Creff Y, Lepreux O, et al. Closed-loop control of a SCR system using a NO x sensor cross-sensitive to NH 3 [J]. Journal of Process Control, 2014, 24:368-378. [17] Gao B, Chen H, Zhao H, et al. A reduced-order nonlinear clutch pressure observer for automatic transmission[J]. IEEE Transactions on Control Systems Technology, 2010,18(2): 446-453. [18] Guo H, Chen H, Cao D, et al. Design of a reduced-order non-linear observer for vehicle velocities estimation[J]. IET Control Theory & Applications, 2013, 7(17): 2056-2068. [19] Willi R. Low-temperature selective catalytic reduction of NO x -catalytic behavior and kinetic modeling[D]. ETH Zurich, Switzerland,1996. [20] Sch`ar C M, Onder C H, Geering H P. Control of an SCR catalytic converter system for a mobile heavy-duty application[J]. IEEE Transactions on Control Systems Technology, 2006, 14(4): 641-653. [21] Heiredal M L, Jensen A D, Thogersen J R, et al. Pilot-scale investigation and cfd modeling of particle deposition in low-dust monolithic SCR deNO x catalysts[J]. AIChE Journal, 2013, 59(6): 1919-1933. [22] Kota A S, Luss D, Balakotaiah V. Modeling studies of low-temperature aerobic NO x reduction by a sequence of LNT-SCR catalysts[J]. AIChE Journal, 2013, 59(9): 3421-3431. [23] Krstic M, Kokotovic P V, Kanellakopoulos I. Nonlinear and Adaptive Control Design[M]. New York:John Wiley & Sons, Inc., 1995. [24] Philipp O, Huber M. Development and test of ECU functions for OBD with enDYNA[C]∥Proc JSAE Annual Congress,Wiesbaden,Germany,2004:1-4. |
[1] | DONG Sa, LIU Da-you, OUYANG Ruo-chuan, ZHU Yun-gang, LI Li-na. Logistic regression classification in networked data with heterophily based on second-order Markov assumption [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1571-1577. |
[2] | GU Hai-jun, TIAN Ya-qian, CUI Ying. Intelligent interactive agent for home service [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1578-1585. |
[3] | GONG Xun, JIANG Bing-jing, HU Yun-feng, QU Ting, CHEN Hong. Design and analysis of nonlinear state observer for master-slave two cell Urea-SCR system of diesel engine [J]. 吉林大学学报(工学版), 2018, 48(4): 1055-1062. |
[4] | WANG Xu, OUYANG Ji-hong, CHEN Gui-fen. Measurement of graph similarity based on vertical dimension sequence dynamic time warping method [J]. 吉林大学学报(工学版), 2018, 48(4): 1199-1205. |
[5] | ZHANG Hao, ZHAN Meng-ping, GUO Liu-xiang, LI Zhi, LIU Yuan-ning, ZHANG Chun-he, CHANG Hao-wu, WANG Zhi-qiang. Human exogenous plant miRNA cross-kingdom regulatory modeling based on high-throughout data [J]. 吉林大学学报(工学版), 2018, 48(4): 1206-1213. |
[6] | LI Jing, HAN Zuo-yue, YANG Wei, XING Guo-cheng, ZHOU Yu. Drive system for magnetorheological suspension based on nonlinear damper electric model [J]. 吉林大学学报(工学版), 2018, 48(3): 645-651. |
[7] | CAO Jing-hua, KONG Fan-sen, RAN Yan-zhong, SONG Rui-chen. Back pressure controller design of air compressor based on fuzzy self-adaptive PID control [J]. 吉林大学学报(工学版), 2018, 48(3): 781-786. |
[8] | HUANG Lan, JI Lin-ying, YAO Gang, ZHAI Rui-feng, BAI Tian. Construction of disease-symptom semantic net for misdiagnosis prompt [J]. 吉林大学学报(工学版), 2018, 48(3): 859-865. |
[9] | LI Xiong-fei, FENG Ting-ting, LUO Shi, ZHANG Xiao-li. Automatic music composition algorithm based on recurrent neural network [J]. 吉林大学学报(工学版), 2018, 48(3): 866-873. |
[10] | LIU Jie, ZHANG Ping, GAO Wan-fu. Feature selection method based on conditional relevance [J]. 吉林大学学报(工学版), 2018, 48(3): 874-881. |
[11] | HE Xiang-kun, JI Xue-wu, YANG Kai-ming, WU Jian, LIU Ya-hui. Tire slip control based on integrated-electro-hydraulic braking system [J]. 吉林大学学报(工学版), 2018, 48(2): 364-372. |
[12] | WANG Xu, OUYANG Ji-hong, CHEN Gui-fen. Heuristic algorithm of all common subsequences of multiple sequences for measuring multiple graphs similarity [J]. 吉林大学学报(工学版), 2018, 48(2): 526-532. |
[13] | YANG Xin, XIA Si-jun, LIU Dong-xue, FEI Shu-min, HU Yin-ji. Target tracking based on improved accelerated gradient under tracking-learning-detection framework [J]. 吉林大学学报(工学版), 2018, 48(2): 533-538. |
[14] | LIU Xue-juan, YUAN Jia-bin, XU Juan, DUAN Bo-jia. Quantum k-means algorithm [J]. 吉林大学学报(工学版), 2018, 48(2): 539-544. |
[15] | QU Hui-yan, ZHAO Wei, QIN Ai-hong. A fast collision detection algorithm based on optimization operator [J]. 吉林大学学报(工学版), 2017, 47(5): 1598-1603. |
|