吉林大学学报(工学版) ›› 2014, Vol. 44 ›› Issue (2): 409-414.doi: 10.13229/j.cnki.jdxbgxb201402021

• paper • Previous Articles     Next Articles

Prediction of FLD for AA7075 under hot stamping based on continuum damage mechanics

ZHUANG Wei-min, CAO De-chuang, YE Hui   

  1. State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun 130022, China
  • Received:2013-03-14 Online:2014-02-01 Published:2014-02-01

RICH HTML

0   

PDF (PC)

801

Abstract:

In view of the limitation of the Forming Limit Diagram (FLD), which is used to evaluate the formability of AA7075 under hot stamping conditions, the continuum damage mechanics was introduced into the prediction of the FLD. A set of uniaxial damage constitutive equations was presented and the material constants were optimized. Based on the analysis of the features of Forming Limit Curves (FLCs) for AA7075 at different temperatures, a plane-stress damage equation was proposed to take account of the damage of material at different stress-strain state. Then the FLCs were predicted on the condition of four sets of temperatures and three sets of strain rates. The results indicate that the stress-strain curves of the numerical analysis of uniaxial damage constitutive equation and the experimental curves are basically consistent. Using the plane-stress unified viscoplastic damage constitutive equations can predict the FLD at different temperature and strain rate in the hot stamping process and provide the failure criteria.

Key words: materials synthesis and processing technology, solid-state mechanics, constitutive equation, 7075 aluminum alloy, forming limit diagram, hot stamping

CLC Number: 

  • TG146

[1] 吴晓炜, 王勇, 梁海建, 等. 铝合金覆盖件快速超塑性成形技术[J]. 塑性工程学报, 2012, 19(1):1-5. Wu Xiao-wei, Wang Yong, Liang Hai-jian, et al. Research on high speed superplastic forming of aluminium alloy automotive panel[J]. Journal of Plasticity Engineering, 2012, 19(1): 1-5.

[2] 黄华, 李大永, 彭颖红. 7075-T6铝合金板温热成形极限图试验[J].塑性工程学报, 2010, 17(1):93-97. Huang Hua, Li Da-yong, Peng Ying-hong. Experiment study on the foming limit diagrams(FLD) of 7075-T6 aluminum alloy sheet at warm state[J]. Journal of Plasticity Engineering, 2010, 17(1): 93-97.

[3] Wang Hui, Luo Ying-bing, Peter Friedman, et al. Warm froming behavior of high strength aluminum alloy AA7075[J]. Transactions of Nonferrous Society of China, 2012, 22(1): 1-7.

[4] 林敦文, 关绍康, 卢广玺, 等. Al-Mg-Si基合金车身板材成形极限及数值应用[J]. 机械工程材料, 2006, 30(4):64-67. Lin Dun-wen, Gun Shao-kang, Lu Guang-xi, et al. Forming limit of Al-Mg-Si based alloy automotive outer sheet and its numerical application[J]. Materials for Mechanical Engineering, 2006, 30(4): 64-67.

[5] 全国锻压标准化技术委员会. GB/T 15825.8-1995 金属薄板成形性能与试验方法-成形极限图(FLD)试验[S].

[6] 朱小芸. 涂装烘干室设备的高温润滑[J]. 汽车工艺与材料, 2009(9):37-41. Zhu Xiao-yun. High temperature Lubricating of Coating oven equipment[J]. Automobile Technology & Material, 2009(9):37-41.

[7] Mohamed M S, Foster A D, Lin Jian-guo, et al. Investigation of deformation and failure features in hot stamping of AA6082: experimentation and modelling[J]. International Journal of Machine Tools & Manufacture, 2012, 53(1): 27-38.

[8] 全国钢标准化技术委员会. GB/T 4338-2006金属材料高温拉伸试验方法[S].

[9] Zhan Li-hua, Lin Jian-guo, Dean T A, et al. Experimental studies and constitutive modeling of the hardening of aluminium alloy 7055 under creep age forming conditions[J]. International Journal of Mechanical Sciences, 2011, 53(8): 595-605.

[10] He Yun-bin, Pan Qing-lin, Chen Qin, et al. Modeling of strain hardening and dynamic recrystallization of ZK60 magnesium alloy during hot deformation[J].Transactions of Nonferrous Metals Society of China, 2012, 22(2): 246-254.

[11] Greze R, Manach P Y, Laurent H, et al. Influence of the temperature on residual stresses and springback effect in an aluminium alloy[J]. International Journal of Mechanical Sciences, 2010, 52(9): 1094-1100.

[12] Lin J, Dean T A. Modelling of microstructure evolution in hot forming using unified constitutive equations[J]. Journal of Materials Processing Technology, 2005, 167(2/3): 354-362.

[13] Cao J, Lin J, Dean T A. An implicit unitless error and step-size control method in integrating unified viscoplastic/creep ODE-type constitutive equatio-ns[J]. International Journal for Numerical Methods in Engineering, 2008, 73(8): 1094-1112.

[14] Li B, Lin B, Yao X. A novel evolutionary algorithm for determining unified creep damage constitutive equations[J]. International Journal of Mechanical Sciences, 2002, 44(5): 987-1002.

[15] Lin J, Cheng B H, Yao X. Universal multi-objective function for optimising superplastic-damage constitutive equations[J]. Journal of Materials Processing Technology, 2002, 125-126(9):199-205.

[16] Cao J, Lin J. A study on formulation of objective functions for determining material models[J]. International Journal of Mechanical Sciences, 2008, 50(2): 193-204.

[17] 王辉. 成形极限图的获取方法与其在金属板料成形中的应用[D]. 南京:南京航空航天大学机电学院, 2011. Wang Hui. Acquisition method of forming limit diagram and its application in sheet metal forming[D]. Nanjing: Electrical and Mechanical College, Nanjing University of Aeronautics and Astronautics, 2011.
[1] GUAN Qing-feng,ZHANG Fu-tao,PENG Tao,LYU Peng,LI Yao-jun,XU Liang,DING Zuo-jun. Hot deformation behavior of 9%Cr steel contained B and Co elements [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1799-1805.
[2] JIANG Qiu-yue,YANG Hai-feng,TAN Cai-wang. Strengthening properties of welded joints of 22MnB5 super high strength steel [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1806-1810.
[3] HU Zhi-qing, YAN Ting-xu, LI Hong-jie, LYU Zhen-hua, LIAO Wei, LIU Geng. Effect of cryogenic treatment on punch-shearing performance of aluminum alloy sheet [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1524-1530.
[4] QIU Xiao-ming, WANG Yin-xue, YAO Han-wei, FANG Xue-qing, XING Fei. Multi-objective optimization of resistance spot welding parameters for DP1180/DP590 using grey relational analysis based Taguchi [J]. 吉林大学学报(工学版), 2018, 48(4): 1147-1152.
[5] CHEN Jun-fu, GUAN Zhi-ping, YANG Chang-hai, NIU Xiao-ling, JIANG Zhen-tao, Song Yu-quan. Comparison of strain ranges and mechanical properties of metal rods under tension and torsion tests [J]. 吉林大学学报(工学版), 2018, 48(4): 1153-1160.
[6] LIANG Xiao-bo, CAI Zhong-yi, GAO Peng-fei. Numerical simulation and experiment of cylindrical forming of sandwich composite panel [J]. 吉林大学学报(工学版), 2018, 48(3): 828-834.
[7] LIU Zi-wu, LI Jian-feng. Erosion damage and evaluation of remanufacturing cladding layer for impeller metals FV520B [J]. 吉林大学学报(工学版), 2018, 48(3): 835-844.
[8] LIU Chun-guo, LIU Wei-dong, DENG Yu-shan. Effect of multi-point punch active loading path on the stretch-forming of sheet [J]. 吉林大学学报(工学版), 2018, 48(1): 221-228.
[9] ZHANG Zhi-qiang, LIU Cong-hao, HE Dong-ye, LI Xiang-ji, LI Ji-xuan. Effect of hot stamping process of boron steel on shape precision based on performance gradient distribution [J]. 吉林大学学报(工学版), 2017, 47(6): 1829-1833.
[10] LYU Meng-meng, GU Zheng-wei, XU Hong, LI Xin. Process optimization of hot stamping for anti-collision beam with ultra high strength [J]. 吉林大学学报(工学版), 2017, 47(6): 1834-1841.
[11] XING Hai-yan, GE Hua, LI Si-qi, YANG Wen-guang, SUN Xiao-jun. Hidden defect metal magnetic memory identification for welded joints based on fuzzy membership and maximum likelihood estimation [J]. 吉林大学学报(工学版), 2017, 47(6): 1854-1860.
[12] GU Xiao-yan, LIU Ya-jun, SUN Da-qian, XU Feng, MENG Ling-shan, GAO Shuai. Microstructures and mechanical properties of transient liquid phase diffusion bonded S355 steel/6005A aluminum alloy joint [J]. 吉林大学学报(工学版), 2017, 47(5): 1534-1541.
[13] GU Zheng-wei, ZHANG Wen-xue, LYU Meng-meng, WANG Wei, XU Hong, LI Xin. Stretch bending defect control of U-section stainless steel profile with wide flange [J]. 吉林大学学报(工学版), 2017, 47(4): 1165-1170.
[14] GU Zheng-wei, LYU Meng-meng, ZHANG Wen-xue, LEI Jiao-jiao, XU Hong. Stamping of front-end three-dimensional skin of China electric multiple units [J]. 吉林大学学报(工学版), 2017, 47(3): 869-875.
[15] YANG Xin-hui, XUE Wei, GUO Nan. Bending performance of glued-lumber beam reinforced with steel plate [J]. 吉林大学学报(工学版), 2017, 47(2): 468-477.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd