吉林大学学报(工学版) ›› 2015, Vol. 45 ›› Issue (4): 1206-1212.doi: 10.13229/j.cnki.jdxbgxb201504027

Previous Articles     Next Articles

Numerical simulation of hot forming of high-strength steel based on damage-phase transformation constitutive model

ZHUANG Wei-min1, XIE Dong-xuan1, YU Tian-ming1, YU Wan-dong2   

  1. 1.State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun 130022, China;
    2.R&
    D Center, China FAW Group Corporation, Changchun 130011, China
  • Received:2014-03-24 Online:2015-07-01 Published:2015-07-01

Abstract: In the simulation of hot forming of high-strength steel, the phase transformation process can be simulated using current commercial finite element analysis software; however, the forming damage process can not be simulated. To overcome such problem, a damage-phase transformation constitutive model for high-strength steel hot forming is established. By writing user defined material subroutine of this mechanical model, which is used in LS-DYNA software, the phase transformation process and forming damage process can be simultaneously predicted. Furthermore, hot forming virtual test of cap-shaped parts is conducted. Results show that the maximum value of the volume fraction of martensite appears in the flange portion of the cap-shaped parts, the average volume faction is 98.5%; while the maximum forming damage concentrates in the middle of the side wall of the parts, and its value reaches 0.7. The effectiveness of constitutive model is verified in this test, and this research may provide guidance for actual production of hot forming of high-strength steel.

Key words: solid-state mechanics, damage-phase transformation constitutive model, high-strength steel, hot forming, numerical simulation

CLC Number: 

  • TG142.1
[1] Naderi M, Ketabchi M, Abbasi M, et al. Analysis of microstructure and mechanical properties of different high strength carbon steels after hot stamping[J]. Journal of Materials Processing Technology,2011,211(6):1117-1125.
[2] 高云凯,高大威,余海燕,等.汽车用高强度钢热成型技术[J]. 汽车技术,2010(8):56-60. Gao Yun-kai, Gao Da-wei, Yu Hai-yan, et al. Analysis on high-strength steel hot forming technology for automobile[J]. Automobile Technology,2010(8):56-60.
[3] 周靖,王宝雨,徐伟力,等. 耦合损伤的22MnB5变形本构模型[J]. 北京科技大学学报,2013,35(11):1450-1457. Zhou Jing, Wang Bao-yu, Xu Wei-li, et al. Damage-coupled constitutive model of 22MnB5 steel in hot deformation[J]. Journal of University of Science and Technology Beijing,2013,35(11):1450-1457.
[4] Bok H H, Lee M G. Comparative study of the prediction of microstructure and mechanical properties for a hot-stamped B-pillar reinforcing part[J]. International Journal of Mechanical Science,2011,53(9):744-752.
[5] Lee M G, Kim S J. Application of hot press forming process to manufacture an automotive part and its finite element analysis considering phase transformation plasticity[J]. International Journal of Mechanical Science,2009,51(11-12):888-898.
[6] Bariani P F, Bruschi S, Ghiotti A. Advances in predicting damage evolution and fracture occurrence in metal forming operations[J]. Journal of Manufacturing Processes,2012,14(4):495-500.
[7] Malcher L, Mamiya E N. An improved damage evolution law based on continuum damage mechanics and its dependence on both stress triaxiality and the third invariant[J]. International Journal of Plasticity,2014,56:232-261.
[8] Kachanov L M. Time of the rupture process under creep conditions[J]. Izv Akad Nauk SSR Otd Tech Nauk,1958,8:26-31.
[9] Lin J, Liu Y, Dean T A. A review on damage mechanisms, models and calibration methods under various deformation conditions[J].International Journal of Damage Mechanics,2005,14(4):299-319.
[10] Watt D F, Coon L, Bibby M, et al. An algorithm for modelling microstructural development in weld heat-affected zones(part a)reaction kinetics[J]. Acta Metallurgica,1988,36(11):3029-3035.
[11] 马宁,胡平,郭威.热成形硼钢热、力及相变耦合关系[J]. 材料热处理学报,2010,31(11): 33-36,41. Ma Ning, Hu Ping, Guo Wei. Experiments and analysis of relations among heat, stress and transformation of boron steel for hot forming[J]. Transactions of Materials and Heat Treatment,2010,31(11):33-36,41.
[12] Lin J, Hayhurst D, Dyson B. A new design of uniaxial testpiece with slit extensometer ridges for improved accuracy of strain measurement[J]. International Journal of Mechanical Sciences,1993,35(1):63-78.
[13] Li N, Mohamed M S, Cai J, et al. Experimental and numerical studies on the formability of materials in hot stamping and cold die quenching process[C]∥The 14th International ESAFORM Conference on Material Forming AIP Conf Proc,2011:1555-1561.
[14] Akerstrom P, Bergman G, Oldenburg M. Numerical implementation of a constitutive model for simulation of hot stamping[J].Modelling and Simulation in Materials Science and Engineering,2007,15:105-119.
[15] Naderi M, Saeed-Akbari A, Bleck W. The effects of non-isothermal deformation on martensitic transformation in 22MnB5 steel[J]. Materials Science and Engineering A,2008,487(1-2):445-455.
[16] Arthur Shapiro. Finite element modelling of hot Stamping[J]. Metal Forming,2011,80(9):658-664.
[1] GUO Hao-tian,XU Tao,LIANG Xiao,YU Zheng-lei,LIU Huan,MA Long. Optimization on thermal surface with rib turbulator inspired by turbulence of alopias' gill in simplified gas turbine transition piece [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1793-1798.
[2] GONG Ya-feng, WANG Bo, WEI Hai-bin, HE Zi-heng, HE Yu-long, SHEN Yang-fan. Surface subsidence law of double-line shield tunnel based on Peck formula [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1411-1417.
[3] ZHUNG Wei-min, ZHAO Wen-zeng, XIE Dong-xuan, LI Bing. Joint performance analysis on connection of ultrahigh-strength steel and aluminum alloy with hot riveting [J]. 吉林大学学报(工学版), 2018, 48(4): 1016-1022.
[4] QIU Yan-kai, LI Bao-ren, YANG Gang, CAO Bo, LIU Zhen. Characteristics and mechanism reducing pressure ripple of hydraulic system with novel hydraulic muffler [J]. 吉林大学学报(工学版), 2018, 48(4): 1085-1091.
[5] LIANG Xiao-bo, CAI Zhong-yi, GAO Peng-fei. Numerical simulation and experiment of cylindrical forming of sandwich composite panel [J]. 吉林大学学报(工学版), 2018, 48(3): 828-834.
[6] LIU Chun-guo, LIU Wei-dong, DENG Yu-shan. Effect of multi-point punch active loading path on the stretch-forming of sheet [J]. 吉林大学学报(工学版), 2018, 48(1): 221-228.
[7] FU Wen-zhi, LIU Xiao-dong, WANG Hong-bo, YAN De-jun, LIU Xiao-li, LI Ming-zhe, DONG Yu-qi, ZENG Zhen-hua, LIU Gui-bin. Multi-point forming process of 1561 aluminum alloy surfaces [J]. 吉林大学学报(工学版), 2017, 47(6): 1822-1828.
[8] LYU Meng-meng, GU Zheng-wei, XU Hong, LI Xin. Process optimization of hot stamping for anti-collision beam with ultra high strength [J]. 吉林大学学报(工学版), 2017, 47(6): 1834-1841.
[9] WANG Hong-chao, SHAN Xi-zhuang, YANG Zhi-gang. Numerical simulation of the influence of ground effect simulation on vehicle cooling system experiment in climate wind tunnel [J]. 吉林大学学报(工学版), 2017, 47(5): 1373-1378.
[10] WANG Guo-lin, SHEN Fei, ZHOU Hai-chao, YANG Jian. Evaluation of tyre pumping noise and design of low noise structure [J]. 吉林大学学报(工学版), 2017, 47(4): 1024-1031.
[11] PENG Wei, LI Guo-xiang, YAN Wei. Improvement in wall functions for engine radiators [J]. 吉林大学学报(工学版), 2017, 47(3): 804-810.
[12] KOU Shu-qing, SONG Wei-feng, SHI Zhou. Fracture splitting simulation and defect analysis of 36MnVS4 connecting rod [J]. 吉林大学学报(工学版), 2017, 47(3): 861-868.
[13] GU Zheng-wei, LYU Meng-meng, ZHANG Wen-xue, LEI Jiao-jiao, XU Hong. Stamping of front-end three-dimensional skin of China electric multiple units [J]. 吉林大学学报(工学版), 2017, 47(3): 869-875.
[14] ZHANG Peng, KOU Shu-qing, ZHAO Yong, LIN Bao-jun. Ananlsis of three rollers axial knurling process of assembled camshaft [J]. 吉林大学学报(工学版), 2016, 46(6): 1953-1960.
[15] YUAN Zhe, XU Dong, LIU Chun-bao, LI Xue-song, LI Shi-chao. Strength analysis of hydraulic retarder blade based on the process of thermal-fluid structure interaction [J]. 吉林大学学报(工学版), 2016, 46(5): 1506-1512.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!