吉林大学学报(工学版) ›› 2016, Vol. 46 ›› Issue (3): 737-744.doi: 10.13229/j.cnki.jdxbgxb201603009

• Orginal Article • Previous Articles     Next Articles

Prediction model time-to-line-crossing during lane change process

WANG Chang, DU Kang, ZHENG Chu-qing   

  1. School of Automobile,Chang'an University,Xi'an 710064,China
  • Received:2014-11-24 Online:2016-06-20 Published:2016-06-20

Abstract: To solve the time-to-line-crossing (TLC) prediction problem during lane change process, the geometrical motion feature of vehicle during lane change was analyzed and a yaw angle estimation algorithm between vehicle and lane mark was proposed. Based on this, TLC prediction models for straight and curve roads were established. A test platform was developed which consists of vision sensor, vehicle gyro and onboard CAN bus data capture card. Real-road driving test of several drivers was carried out, and representative data of lane change state were collected. The TLC prediction models were tested using the real lane change data. Results show that 87.0% prediction errors on straight road were less than or equal 0.1 s, and the corresponding rate on curve road was 93.7%. The prediction errors of two models meet the normal distribution.

Key words: vehicle engineering, time to line crossing, geometry analysis, yaw angle estimate, vehicle active safety

CLC Number: 

  • U461.91
[1] Eidehall A, Pohl J, Gustafsson F. Joint road geometry estimation and vehicle tracking[J]. Control Engineering Practice,2007,15(12):1484-1494.
[2] Naohiro Y, Jun T. Multi-driver agent-based traffic simulation systems for evaluating the effects of advanced driver assistance systems on road traffic accidents[J]. Cognition, Technology & Work,2006,8(4):283-300.
[3] Möbus R, Baotic M, Morari M. Multi-object adaptive cruise control[J]. Lecture Notes in Computer Science,2003,2623:359-374.
[4] van Winsum W, Brookhuis K A, de Waard D. A comparison of different ways to approximate timeto-line crossing (TLC) during car driving[J]. Accident Analysis and Prevention,2000,32(1):47-56.
[5] van Winsum W, de Waard D, Brookhuis K A. Lane change maneuvers and safety margins[J]. Transportation Research Part F: Traffic Psychology and Behaviour,1999,2(3):139-149.
[6] Tideman M, van der Voort M C, van Arem B, et al. A review of lateral driver support systems[C]∥Proceedings of the 2007 IEEE Intelligent Transportation Systems Conference Seattle, WA, USA, 2007:992-999.
[7] Eidehall A.An automotive lane guidance system[D].Linköping:Department of Electrical Engineering, Automatic Control,Linköping University,2004.
[8] 徐慧智,裴玉龙,程国柱. 基于期望运行轨迹的车道变换行为安全性分析[J]. 中国安全科学学报,2010,20(1):90-95.
Xu Hui-zhi, Pei Yu-long, Cheng Guo-zhu. Study on the safety of lane-changing based on virtual desire trajectory[J]. China Safety Science Journal(CSSJ), 2010,20(1):90-95.
[9] 任殿波,张继业,张京明,等. 智能车辆弯路换道轨迹规划与横摆率跟踪控制[J]. 中国科学:技术科学,2011,41(3):306-317.
Ren Dian-bo,Zhang Ji-ye,Zhang Jing-ming, et al. Trajectory planning and yaw rate tracking control for lane changing of intelligent vehicle on curved road[J]. Sci China Tech Sci,2011,41(3):306-317.
[10] Mandalia H M, Salvucci D D. Using support vector machines for lane-change detection[J]. Proceedings of the Human Factors and Ergonomics Society Annual Meeting September,2005,49(22):1965-1969.
[11] 娄路,赵玲,耿涛. 运动车辆检测与跟踪方法[J]. 交通运输工程学报,2012,12(4):107-113.
Lou Lu, Zhao Ling, Geng Tao. Detecting and tracking method of moving vehicle[J]. Journal of Traffic and Transportation Engineering,2012,12(4):107-113.
[12] 高振海,王竣,佟静,等. 车载毫米波雷达对前方目标的运动状态估计[J]. 吉林大学学报:工学版,2014,44(6):1537-1544.
Gao Zhen-hai, Wang Jun, Tong Jing, et al. Target motion state estimation for vehicle-borne millimeter-wave radar[J]. Journal of Jilin University(Engineering and Technology Edition),2014,44(6):1537-1544.
[13] Li Liang, Song Jian, Wang Hui-yi, et al. Fast estimation and compensation of the tire force in real time control for vehicle dynamic stability control system[J]. International Journal of Vehicle Design,2008,46(3-4):208-229.
[14] 罗莉华,龚李龙,李平,等. 考虑驾驶员行驶特性的双模式自适应巡航控制设计[J]. 浙江大学学报:工学版,2011,45(12):2073-2077.
Luo Li-hua, Gong Li-long, Li Ping, et al. Two-mode adaptive cruise control design with humans driving habits consideration[J]. Journal of Zhejiang University(Engineering Science),2011,45(12):2073-2077.
[15] 赵又群. 汽车动力学中若干关键状态和参数估计研究的现状与发展[J]. 中国机械工程,2010,21(10):1250-1253.
Zhao You-qun. Present state and perspectives of estimation research for several key states and parameters in vehicle dynamics[J]. China Mechanic Engineering,2010,21(10):1250-1253.
[1] CHANG Cheng,SONG Chuan-xue,ZHANG Ya-ge,SHAO Yu-long,ZHOU Fang. Minimizing inverter capacity of doubly-fed machine driving electric vehicles [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1629-1635.
[2] XI Li-he,ZHANG Xin,SUN Chuan-yang,WANG Ze-xing,JIANG Tao. Adaptive energy management strategy for extended range electric vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1636-1644.
[3] HE Ren,YANG Liu,HU Dong-hai. Design and analysis of refrigeration system supplied by solar auxiliary power of refrigerator car [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1645-1652.
[4] NA Jing-xin,MU Wen-long,FAN Yi-sa,TAN Wei,YANG Jia-zhou. Effect of hygrothermal aging on steel-aluminum adhesive joints for automotive applications [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1653-1660.
[5] LIU Yu-mei,LIU Li,CAO Xiao-ning,XIONG Ming-ye,ZHUANG Jiao-jiao. Construction on collision avoidance model of bogie dynamic simulation test bench [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1661-1668.
[6] ZHAO Wei-qiang, GAO Ke, WANG Wen-bin. Prevention of instability control of commercial vehicle based on electric-hydraulic coupling steering system [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1305-1312.
[7] SONG Da-feng, WU Xi-tao, ZENG Xiao-hua, YANG Nan-nan, LI Wen-yuan. Life cycle cost analysis of mild hybrid heavy truck based on theoretical fuel consumption model [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1313-1323.
[8] ZHU Jian-feng, ZHANG Jun-yuan, CHEN Xiao-kai, HONG Guang-hui, SONG Zheng-chao, CAO Jie. Design modification for automotive body structure based on seat pull safety performance [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1324-1330.
[9] NA Jing-xin, PU Lei-xin, FAN Yi-sa, SHEN Chuan-liang. Effect of temperature and humidity on the failure strength of Sikaflex-265 aluminum adhesive joints [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1331-1338.
[10] WANG Yan, GAO Qing, WANG Guo-hua, ZHANG Tian-shi, YUAN Meng. Simulation of mixed inner air-flow integrated thermal management with temperature uniformity of Li-ion battery [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1339-1348.
[11] JIN Li-sheng, XIE Xian-yi, GAO Lin-lin, GUO Bai-cang. Distributed electric vehicle stability control based on quadratic programming [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1349-1359.
[12] KUI Hai-lin, BAO Cui-zhu, LI Hong-xue, LI Ming-da. Idling time prediction method based on least square support vector machine [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1360-1365.
[13] WANG De-jun, WEI Wei-li, BAO Ya-xin. Actuator fault diagnosis of ESC system considering crosswind interference [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1548-1555.
[14] HU Man-jiang, LUO Yu-gong, CHEN Long, LI Ke-qiang. Vehicle mass estimation based on longitudinal frequency response characteristics [J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
[15] LIU Guo-zheng, SHI Wen-ku, Chen Zhi-yong. Finite element analysis of transmission error for hypoid gears considering installation error [J]. 吉林大学学报(工学版), 2018, 48(4): 984-989.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!