吉林大学学报(工学版) ›› 2016, Vol. 46 ›› Issue (3): 745-750.doi: 10.13229/j.cnki.jdxbgxb201603010

• Orginal Article • Previous Articles     Next Articles

Crushing model of rectangular section thin-walled beam filled with aluminum foam

ZHANG Jun-yuan1, 2, ZHANG Qiu-shi1, LIU Wei-guo3, ZHANG Le1, WU Li-nan1, ZHOU Hao1   

  1. 1.State Key Laboratory of Automotive Simulation and Control, Jilin University,Changchun 130022,China;
    2.State Key Laboratory of Automotive Safety and Energy,Tsinghua University,Beijing 100084,China;
    3.Zhejiang Geely Automobile Institute Co.,Ltd.,Hangzhou 311228,China
  • Received:2014-11-26 Online:2016-06-20 Published:2016-06-20

RICH HTML

0   

PDF (PC)

158

Abstract: A crushing model of rectangular section thin-walled beam filled with aluminum foam is proposed based on the theory of hollow rectangular section beams. The influence of the aluminum foam on the effective crushing length and the interaction between the foam and the thin-walled beam in crushing are considered in this crushing model. The average crushing force is composed of three parts, the modified hollow beam crushing force, the aluminum foam crushing force and the interaction force between the foam and the beam. Experiment data of mild steel and aluminum thin-walled beams filled with aluminum foam are adopted to validate the proposed crushing model. It is shown that the theoretical results are in good agreement with the experiment results.

Key words: vehicle engineering, aluminum foam-filled, rectangular section thin-walled beam, rushing theory

CLC Number: 

  • U461.91
[1] 桂良进,范子杰,王青春. 泡沫填充圆管的轴向压缩能量吸收特性[J]. 清华大学学报:自然科学版,2003,43(11):1526-1529.
Gui Liang-jin,Fan Zi-jie,Wang Qing-chun. Energy absorption properties of foam-filled circular tube subjected to axial crushing[J]. Journal of Tsinghua University(Science and Technology),2003,43(11):1526-1529.
[2] Reid S R, Reddy T Y, Gray M D. Static and dynamic axial crushing of foam-filled sheet metal tubes[J]. International Journal of Mechanical Sciences,1986,28(5):295-322.
[3] Hanssen A G, Langseth M, Hopperstad O S. Static crushing of square aluminium extrusions with aluminium foam filler[J]. International Journal of Mechanical Sciences,1999,41(8):967-993.
[4] Hanssen A G, Langseth M, Hopperstad O S. Static and dynamic crushing of square aluminium extrusions with aluminium foam filler[J]. International Journal of Impact Engineering,2000,24(4):347-383.
[5] 王青春,范子杰,桂良进,等. 泡沫铝填充帽型结构轴向冲击吸能特性的试验研究[J]. 机械工程学报,2006,42(4):101-106.
Wang Qing-chun, Fan Zi-jie, Gui Liang-jin,et al. Experimental studies on the axial crash behaviour of aluminium foam-filled hat sections[J]. Chinese Journal of Mechanical Engineering,2006,42(4):101-106.
[6] Zarei H R, Kröger M. Optimum honeycomb filled crash absorber design[J]. Materials & Design,2008,29(1): 193-204.
[7] Zarei H R, Kröger M. Optimization of the foam-filled aluminum tubes for crush box application[J]. Thin-Walled Structures,2008,46(2):214-221.
[8] Abramowicz W, Jones N. Dynamic axial crushing of square tubes[J]. International Journal of Impact Engineering,1984,2(2):179-208.
[9] Kecman D. Bending collapse of rectangular and square section tubes[J]. International Journal of Mechanical Sciences,1983,25(9):623-636.
[10] Santosa S P. Crashworthiness analysis of ultralight metal structures[D]. Cambridge:Massachusetts Institute of Technology, 1999.
[11] Seitzberger M, Rammerstorfer F G, Degischer H P, et al. Crushing of axially compressed steel tubes filled with aluminium foam[J]. Acta Mechanica,1997,125(1-4):93-105.
[1] CHANG Cheng,SONG Chuan-xue,ZHANG Ya-ge,SHAO Yu-long,ZHOU Fang. Minimizing inverter capacity of doubly-fed machine driving electric vehicles [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1629-1635.
[2] XI Li-he,ZHANG Xin,SUN Chuan-yang,WANG Ze-xing,JIANG Tao. Adaptive energy management strategy for extended range electric vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1636-1644.
[3] HE Ren,YANG Liu,HU Dong-hai. Design and analysis of refrigeration system supplied by solar auxiliary power of refrigerator car [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1645-1652.
[4] NA Jing-xin,MU Wen-long,FAN Yi-sa,TAN Wei,YANG Jia-zhou. Effect of hygrothermal aging on steel-aluminum adhesive joints for automotive applications [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1653-1660.
[5] LIU Yu-mei,LIU Li,CAO Xiao-ning,XIONG Ming-ye,ZHUANG Jiao-jiao. Construction on collision avoidance model of bogie dynamic simulation test bench [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1661-1668.
[6] ZHAO Wei-qiang, GAO Ke, WANG Wen-bin. Prevention of instability control of commercial vehicle based on electric-hydraulic coupling steering system [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1305-1312.
[7] SONG Da-feng, WU Xi-tao, ZENG Xiao-hua, YANG Nan-nan, LI Wen-yuan. Life cycle cost analysis of mild hybrid heavy truck based on theoretical fuel consumption model [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1313-1323.
[8] ZHU Jian-feng, ZHANG Jun-yuan, CHEN Xiao-kai, HONG Guang-hui, SONG Zheng-chao, CAO Jie. Design modification for automotive body structure based on seat pull safety performance [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1324-1330.
[9] NA Jing-xin, PU Lei-xin, FAN Yi-sa, SHEN Chuan-liang. Effect of temperature and humidity on the failure strength of Sikaflex-265 aluminum adhesive joints [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1331-1338.
[10] WANG Yan, GAO Qing, WANG Guo-hua, ZHANG Tian-shi, YUAN Meng. Simulation of mixed inner air-flow integrated thermal management with temperature uniformity of Li-ion battery [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1339-1348.
[11] JIN Li-sheng, XIE Xian-yi, GAO Lin-lin, GUO Bai-cang. Distributed electric vehicle stability control based on quadratic programming [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1349-1359.
[12] KUI Hai-lin, BAO Cui-zhu, LI Hong-xue, LI Ming-da. Idling time prediction method based on least square support vector machine [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1360-1365.
[13] WANG De-jun, WEI Wei-li, BAO Ya-xin. Actuator fault diagnosis of ESC system considering crosswind interference [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1548-1555.
[14] HU Man-jiang, LUO Yu-gong, CHEN Long, LI Ke-qiang. Vehicle mass estimation based on longitudinal frequency response characteristics [J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
[15] LIU Guo-zheng, SHI Wen-ku, Chen Zhi-yong. Finite element analysis of transmission error for hypoid gears considering installation error [J]. 吉林大学学报(工学版), 2018, 48(4): 984-989.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd