吉林大学学报(工学版) ›› 2016, Vol. 46 ›› Issue (5): 1567-1576.doi: 10.13229/j.cnki.jdxbgxb201605027

Previous Articles     Next Articles

Factors influencing inverse bulging effect in sheet hydroforming

LANG Li-hui1,2, WANG Yao1, LI Kui1, SUN Zhi-ying1, ZHANG Quan-da1   

  1. 1.School of Mechanical Engineering and Automation, Beihang University, Beijing 100191, China;
    2.Collaborative Innovation Center of Advanced Aero-Engine, Beihang University, Beijing 100191, China
  • Received:2015-05-20 Online:2016-09-20 Published:2016-09-20

RICH HTML

0   

PDF (PC)

221

Abstract: The factors that influence the inverse bulging effect in sheet hydro-mechanical deep drawing are investigated. According to different inverse bulging processes, two modes can be singled: the Initial Inverse Bulging (IIB) and the Local Inverse Bulging (LIB). IIB includes two parameters: inverse bulging height ratio (HIb/t) and inverse bulging pressure (pIb/t). LIB is influenced by IIB and has a direct relationship with liquid chamber pressure in the forming process. The optimal inverse bulging parameters of hemispherical bottom cylindrical part and flat bottom cylindrical part are obtained by numerical simulation. The process parameters, including the clearance between the punch and blank holder, and the radius of the blank holder entrance, which strongly influence the inverse bulging effect, are optimized, so as to make the inverse bulging effect behave better in hydroforming process. The accuracy of the numerical simulation is verified by experiments.

Key words: materials synthesis and processing technology, sheet hydroforming, inverse bulging effect, clearance between the punch and the blank holder, blank holder entrance radius

CLC Number: 

  • TG394
[1] Li M Z, Liu Y H, Su S Z,et al. Multi-point forming: a flexible manufacturing method for a 3-D surface sheet[J]. Journal of Materials Processing Technology,1999,87(1-3): 277-280.
[2] 陈先有, 赵良堂, 白春华,等. 精密钣金成形技术在航空制造领域的应用分析[J]. 航空精密制造技术, 2008, 44 (2): 38-41.
Chen Xian-you, Zhao Liang-tang, Bai Chun-hua, et al. Analysis of precision sheet metal forming technology in the field of aviation manufacturing application[J]. Aviation Precision Manufacturing Technology, 2008, 44 (2): 38-41.
[3] 康达昌, 郎利辉, 张士宏,等. 液压拉深工艺的研究[J]. 哈尔滨工业大学学报, 2000, 32 (5): 42-44.
Kang Da-chang, Lang Li-hui, Zhang Shi-hong, et al. Hydrodynamic deep drawing process[J]. Journal of Harbin Institute of Technology, 2000, 32 (5): 42-44.
[4] Zhang S H, Danckert J. Development of hydromechanical deep drawing[J]. Journal of Materials Processing Technology, 1998,83(1-3):14-20.
[5] Swadesh K S, Kumarb D R. Effect of process parameters on product surface finish and thickness variation in hydro-mechanical deep drawing[J]. Journal of Materials Processing Technology,2008,204(1-3):169-178.
[6] Lang L H, Joachim D, Karl B N. Investigation into the effect of pre-bulging during hydromechanical deep drawing with uniform pressure onto the blank[J]. International Journal of Machine Tools & Manufacture, 2004, 44(6): 649-657.
[7] Larsen B. Hydromechanical forming of sheet metal[J]. Sheet Metal Industries, 1977,54(2):162-168.
[8] Lang L H, Wang Y M, Xie Y S, et al. Pre-bulging effect during sheet hydroforming process of aluminum alloy box with unequal height and flat bottom[J]. Trans Nonferrous Met Soc China,2012,22(22):302-308.
[9] 刘晓晶, 徐永超, 苑世剑. 反胀压力对铝合金球底筒形件充液拉深过程的影响[J]. 塑性工程学报, 2008, 15 (3): 42-46.
Liu Xiao-jing, Xu Yong-chao, Yuan Shi-jian. The influence of inverse bulging pressure on the hydrodynamic deep drawing process of aluminium alloy cylindrical cups with a hemispherical bottom[J]. Journal of Plasticity Engineering, 2008, 15 (3): 42-46.
[10] 陈保国, 徐永超. 预胀对筒形件充液拉深变形和硬化的影响[J]. 材料科学与工艺, 2011, 19 (1): 17-20.
Chen Bao-guo, Xu Yong-chao. Influence of pre-bulging on deformation and hardness of dual-phase steel cylindrical cup by hydrodynamic deep drawing process[J]. Materials Science & Technology, 2011, 19 (1): 17-20.
[1] JIANG Qiu-yue,YANG Hai-feng,TAN Cai-wang. Strengthening properties of welded joints of 22MnB5 super high strength steel [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1806-1810.
[2] HU Zhi-qing, YAN Ting-xu, LI Hong-jie, LYU Zhen-hua, LIAO Wei, LIU Geng. Effect of cryogenic treatment on punch-shearing performance of aluminum alloy sheet [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1524-1530.
[3] QIU Xiao-ming, WANG Yin-xue, YAO Han-wei, FANG Xue-qing, XING Fei. Multi-objective optimization of resistance spot welding parameters for DP1180/DP590 using grey relational analysis based Taguchi [J]. 吉林大学学报(工学版), 2018, 48(4): 1147-1152.
[4] CHEN Jun-fu, GUAN Zhi-ping, YANG Chang-hai, NIU Xiao-ling, JIANG Zhen-tao, Song Yu-quan. Comparison of strain ranges and mechanical properties of metal rods under tension and torsion tests [J]. 吉林大学学报(工学版), 2018, 48(4): 1153-1160.
[5] LIANG Xiao-bo, CAI Zhong-yi, GAO Peng-fei. Numerical simulation and experiment of cylindrical forming of sandwich composite panel [J]. 吉林大学学报(工学版), 2018, 48(3): 828-834.
[6] LIU Zi-wu, LI Jian-feng. Erosion damage and evaluation of remanufacturing cladding layer for impeller metals FV520B [J]. 吉林大学学报(工学版), 2018, 48(3): 835-844.
[7] LIU Chun-guo, LIU Wei-dong, DENG Yu-shan. Effect of multi-point punch active loading path on the stretch-forming of sheet [J]. 吉林大学学报(工学版), 2018, 48(1): 221-228.
[8] LYU Meng-meng, GU Zheng-wei, XU Hong, LI Xin. Process optimization of hot stamping for anti-collision beam with ultra high strength [J]. 吉林大学学报(工学版), 2017, 47(6): 1834-1841.
[9] XING Hai-yan, GE Hua, LI Si-qi, YANG Wen-guang, SUN Xiao-jun. Hidden defect metal magnetic memory identification for welded joints based on fuzzy membership and maximum likelihood estimation [J]. 吉林大学学报(工学版), 2017, 47(6): 1854-1860.
[10] GU Xiao-yan, LIU Ya-jun, SUN Da-qian, XU Feng, MENG Ling-shan, GAO Shuai. Microstructures and mechanical properties of transient liquid phase diffusion bonded S355 steel/6005A aluminum alloy joint [J]. 吉林大学学报(工学版), 2017, 47(5): 1534-1541.
[11] GU Zheng-wei, ZHANG Wen-xue, LYU Meng-meng, WANG Wei, XU Hong, LI Xin. Stretch bending defect control of U-section stainless steel profile with wide flange [J]. 吉林大学学报(工学版), 2017, 47(4): 1165-1170.
[12] GU Zheng-wei, LYU Meng-meng, ZHANG Wen-xue, LEI Jiao-jiao, XU Hong. Stamping of front-end three-dimensional skin of China electric multiple units [J]. 吉林大学学报(工学版), 2017, 47(3): 869-875.
[13] YANG Xin-hui, XUE Wei, GUO Nan. Bending performance of glued-lumber beam reinforced with steel plate [J]. 吉林大学学报(工学版), 2017, 47(2): 468-477.
[14] LIANG Ji-cai, LI Yi, GAO Song, TENG Fei. Springback prediction for multi-point 3D stretch bending profile [J]. 吉林大学学报(工学版), 2017, 47(1): 185-190.
[15] XU Hong, LIU Ya-nan, YU Ting, GU Zheng-wei, LI Xiang-ji, ZHANG Zhi-qiang. Inelastic recovery behavior and microscopic mechanism of high strength DP780 steel during cyclic loading-unloading [J]. 吉林大学学报(工学版), 2017, 47(1): 191-198.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] LIU Song-shan, WANG Qing-nian, WANG Wei-hua, LIN Xin. Influence of inertial mass on damping and amplitude-frequency characteristic of regenerative suspension[J]. 吉林大学学报(工学版), 2013, 43(03): 557 -563 .
[2] CHU Liang, WANG Yan-bo, QI Fu-wei, ZHANG Yong-sheng. Control method of inlet valves for brake pressure fine regulation[J]. 吉林大学学报(工学版), 2013, 43(03): 564 -570 .
[3] LI Jing, WANG Zi-han, YU Chun-xian, HAN Zuo-yue, SUN Bo-hua. Design of control system to follow vehicle state with HIL test beach[J]. 吉林大学学报(工学版), 2013, 43(03): 577 -583 .
[4] HU Xing-jun, LI Teng-fei, WANG Jing-yu, YANG Bo, GUO Peng, LIAO Lei. Numerical simulation of the influence of rear-end panels on the wake flow field of a heavy-duty truck[J]. 吉林大学学报(工学版), 2013, 43(03): 595 -601 .
[5] WANG Tong-jian, CHEN Jin-shi, ZHAO Feng, ZHAO Qing-bo, LIU Xin-hui, YUAN Hua-shan. Mechanical-hydraulic co-simulation and experiment of full hydraulic steering systems[J]. 吉林大学学报(工学版), 2013, 43(03): 607 -612 .
[6] ZHANG Chun-qin, JIANG Gui-yan, WU Zheng-yan. Factors influencing motor vehicle travel departure time choice behavior[J]. 吉林大学学报(工学版), 2013, 43(03): 626 -632 .
[7] MA Wan-jing, XIE Han-zhou. Integrated control of main-signal and pre-signal on approach of intersection with double stop line[J]. 吉林大学学报(工学版), 2013, 43(03): 633 -639 .
[8] YU De-xin, TONG Qian, YANG Zhao-sheng, GAO Peng. Forecast model of emergency traffic evacuation time under major disaster[J]. 吉林大学学报(工学版), 2013, 43(03): 654 -658 .
[9] XIAO Yun, LEI Jun-qing, ZHANG Kun, LI Zhong-san. Fatigue stiffness degradation of prestressed concrete beam under multilevel amplitude cycle loading[J]. 吉林大学学报(工学版), 2013, 43(03): 665 -670 .
[10] XIAO Rui, DENG Zong-cai, LAN Ming-zhang, SHEN Chen-liang. Experiment research on proportions of reactive powder concrete without silica fume[J]. 吉林大学学报(工学版), 2013, 43(03): 671 -676 .
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd