吉林大学学报(工学版) ›› 2011, Vol. 41 ›› Issue (01): 128-0132.

• paper • Previous Articles     Next Articles

Measurement method for diesel nozzle internal geometry and size using high-energy synchrotron radiation X-ray

LI Zhi-long1, WU Zhi-jun1, GAO Yuan1, DENG Jun1, HU Zong-jie1, LI Li-guang1,XIAO Ti-qiao2, FU Ya-nan2, CHEN Rong-chang2   

  1. 1.School of Automobile, Tongji University, Shanghai 200092, China|2.Shanghai Synchrotron Radiation Facility, Shanghai 201203, China
  • Received:2010-03-09 Online:2011-01-01 Published:2011-01-01

Abstract:

It is difficult to measure the internal geometry and size of diesel nozzle directly due to lack of convenient measuring method. Applying the high-energy synchrotron radiation X-ray of Shanghai synchrotron radiation facility(SSRF), nozzles were tomoscanned and high-precision three-dimensional structure models of nozzle internal geometry were obtained. According to these models, the plane angle, diameter, cone angle and chamfer radius of nozzle hole were measured successfully. The results show that the proposed measuring method can measure the internal geometry and size of injector nozzle with high precision.

Key words: technology of instrument and meter, injector, internal geometry, CT, Shanghai synchrotron radiation facility(SSRF)

CLC Number: 

  • TH3
[1] CHANG Cheng,SONG Chuan-xue,ZHANG Ya-ge,SHAO Yu-long,ZHOU Fang. Minimizing inverter capacity of doubly-fed machine driving electric vehicles [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1629-1635.
[2] XI Li-he,ZHANG Xin,SUN Chuan-yang,WANG Ze-xing,JIANG Tao. Adaptive energy management strategy for extended range electric vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1636-1644.
[3] CHEN Yong-heng,LIU Fang-hong,CAO Ning-bo. Analysis of conflict factors between pedestrians and channelized right turn vehicles at signalized intersections [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1669-1676.
[4] LI Yi,LIU Li-ping,SUN Li-jun. Prediction model on rutting equivalent temperature for asphalt pavement at different depth [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1703-1711.
[5] GU Hai-dong,LUO Chun-hong. Experiment on soil arching effect of pit supporting structure with scattered row piles and soil nail wall [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1712-1724.
[6] HUI Ying-xin,MAO Ming-jie,LIU Hai-feng,ZHANG Shang-rong. Influence of structural seismic response of bridges crossing active fault [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1725-1734.
[7] JIANG Tao,LIN Xue-dong,LI De-gang,YANG Miao,TANG Xue-lin. Effect of control parameters on heat release rate with ANN method [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1747-1754.
[8] DONG Wei,SONG Bai-da,QIU Li-tao,SUN Hao-tian,SUN Ping,PU Chao-jie. Effect of fuel ratio of two injections on combustion and emissions in warm-up process of gasoline direct injection engine [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1755-1761.
[9] BI Qiu-shi,WANG Guo-qiang,HUANG Ting-ting,MAO Rui,LU Yan-peng. Tooth strength analysis of mineral sizer by coupling discrete element method and finite element method [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1770-1776.
[10] JIANG Qiu-yue,YANG Hai-feng,TAN Cai-wang. Strengthening properties of welded joints of 22MnB5 super high strength steel [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1806-1810.
[11] GU Wan-li,WANG Ping,HU Yun-feng,CAI Shuo,CHEN Hong. Nonlinear controller design of wheeled mobile robot with H performance [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1811-1819.
[12] WU Wei-nan,CUI Nai-gang,GUO Ji-feng,ZHAO Yang-yang. Distributed integrated method for mission planning of heterogeneous unmanned aerial vehicles [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1827-1837.
[13] ZHAO Shuang,SHEN Ji-hong,ZHANG Liu,ZHAO Han,CHEN Ke-fan. Evaluation of surface roughness of micro electrical discharge machining based-on fast Gauss algorithm [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1838-1843.
[14] ZHAO Dong,SUN Ming-yu,ZHU Jin-long,YU Fan-hua,LIU Guang-jie,CHEN Hui-ling. Improved moth-flame optimization method based on combination of particle swarm optimization and simplex method [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1867-1872.
[15] ZHOU Yan-guo,ZHANG Hai-lin,CHEN Rui-rui,ZHOU Tao. Two-level game approach based resource allocation scheme in cooperative networks [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1879-1886.
Viewed
Full text
64
HTML PDF
Just accepted Online first Issue Just accepted Online first Issue
0 0 0 0 0 64


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!