吉林大学学报(工学版) ›› 2015, Vol. 45 ›› Issue (1): 153-160.doi: 10.13229/j.cnki.jdxbgxb201501023

• Orignal Article • Previous Articles     Next Articles

Design and implementation of multi-channel borehole-surface potential gradient detection system

JIA Zheng-sen1,2, LIN Jun1,2, ZHU Kai-guang1,2, WANG Jia1,2, LI Xue-tao1,2   

  1. 1.National Geophysical Exploration Instrument Engineering Technology Research Center, Jilin University,Changchun 130026, China;
    2.College of Instrumentation and Electrical Engineering, Jilin University, Changchun 130026, China
  • Received:2013-05-03 Online:2015-02-01 Published:2015-02-01

RICH HTML

0   

PDF (PC)

338

Abstract: Theoretical calculations are carried out based on a vertical line source 3D abnormal potential of finite difference to verify the effectiveness of potential gradient in the detection of water injection direction. Then, a low-noise, high-resolution oil borehole-surface potential gradient detection system is designed and developed based on virtual instrument technology. The system applies a differential input. The short circuit noise amplitude is lower than -130 dB. The A/D acquisition, which adopts the expansion slot design ideas, realizes the synchronization of multi-channel data acquisition. The upper layer software consists of Matlab and Labview programming techniques, thus the extraction of weak signals and real-time imaging of detection results can be achieved. Experiments show that the potential gradient detection system has higher resolution and good stability compared to the potential detection system. By processing and analyzing the experimental data obtained from the injection wells in Daqing oilfield, it can locate the cutting-edge of water drive. Furthermore, the injection well data prove the accuracy and effectiveness of the system in detecting the water injection direction.

Key words: technology of instrument and meter, borehole-surface potential gradient, residual oil, finite differences, Labview, multi-channel

CLC Number: 

  • TH762
[1] 高博禹,彭仕宓,王建波. 剩余油形成与分布的研究现状及发展趋势[J]. 特种油气藏,2004,8(4):38-41.
Gao Bo-yu,Peng Shi-bi,Wang Jian-bo. Research status and development trend of the remaining oil in the formation and distribution[J]. Special Oil and Gas Reservoirs,2004,8(4): 38-41.
[2] Wang Tsili,Stodt John A,Stierman Donals J,et al.Mapping hydraulic fractures using a borehole-to-surface electrical resisitivity method[J]. Geoexploration,1991,28(3-4):349-369.
[3] Keisuke Ushijima. Fluid flow monitoring of EOR process by electrical prospecting[C]∥Expanded Abstracts, SEG 67th Annual Meeting,1997,Dallas:651-653.
[4] Ho Trong Long. 3-D inversion of borehole-to-surface electrical data using a back-propagation neural network[J]. Journal of Applied Geophysics, 2009, 68(4):489-499.
[5] Marsala A F, Al-Buali M, Ali Z, et al. First borehole to surface electromagnetic survey in KSA: Reservoir mapping and monitoring at a New Scale[C]∥SPE Paper 146348,2011.
[6] 张金成.电位法井间监测技术[J].地震地质,2001,23(2):292-300.
Zhang Jin-cheng. Potential method well monitoring technology[J]. Chinese Seismology and Geology, 2001,23(2): 292-300.
[7] 王志刚,何展翔. 井-地电法三维物理模型试验[J].石油地球物理学报,2005,40(5):594-597.
Wang Zhi-gang, He Zhan-xiang. Borehole-surface electrical three-dimensional physical model test[J]. Oil Geophysical Journal, 2005,40(5):594-597.
[8] 徐凯军,李桐林. 垂直有限线源三维地电场有限差分正演研究[J].吉林大学学报:地球科学版,2006,36(1):137-141.
Xu Kai-jun,Li Tong-lin. The forward modeling of three-dimensional geoelectric field of vertical finite line source by finite-difference method[J]. Journal of Jilin University(Earth Science Edition),2006,36(1):137-141.
[9] 邵雷. 井-地电位检测系统研究[D].长春:吉林大学仪器系,2006.
Shao Lei. Research on detection system for well-earth potential[D]. Changchun: Department of Instrument, Jilin University,2006.
[10] 徐世浙.地球物理中的有限单元法[M].北京:科学出版社,1994: 178-193.
[11] 曲丽荣,胡容,范寿康.Labview、Matlab及其混合编程技术[M].北京:机械工业出版社,2011.
[12] 钱峰.EZ-USB FX2 单片机原理、编程及应用[M].北京:北京航空航天大学出版社,2006.
[13] 高晋占.微弱信号检测[M].北京:清华大学出版社,2004.
[14] 王超,宋克柱,唐进. 高性能水下地震数据采集系统设计与实现[J]. 吉林大学学报:工学版,2007,37(1):168-172.
Wang Chao,Song Ke-zhu,Tang Jin. High performance data acquisition system for marine seismic survey[J]. Journal of Jilin University (Engineering and Technology Edition),2007,37(1): 168-172.
[1] QIU Yan-kai, LI Bao-ren, YANG Gang, CAO Bo, LIU Zhen. Characteristics and mechanism reducing pressure ripple of hydraulic system with novel hydraulic muffler [J]. 吉林大学学报(工学版), 2018, 48(4): 1085-1091.
[2] DING Ning, CHANG Yu-chun, ZHAO Jian-bo, WANG Chao, YANG Xiao-tian. High-speed CMOS image sensor data acquisition system based on USB 3.0 [J]. 吉林大学学报(工学版), 2018, 48(4): 1298-1304.
[3] WU Jiang, XU Zhuang, LIU Li-jia, JI Yan-ju, LI Su-yi. Peripheral oxygen saturation detecting prototype applied in sleep apnea syndrome [J]. 吉林大学学报(工学版), 2018, 48(2): 640-644.
[4] YANG Cheng, SONG Ping, PENG Wen-jia, JIN Hao-long, PAN Zhi-qiang. Design of armored vehicle integrated test system based on hybrid bus [J]. 吉林大学学报(工学版), 2018, 48(1): 186-198.
[5] YANG Cheng, SONG Ping, PENG Wen-jia, DENG Gao-shou, LIU Xiong-jun. Design of host computer platform for armored vehicle integrated test system [J]. 吉林大学学报(工学版), 2017, 47(6): 1796-1803.
[6] WANG Tian-hao, WANG Zhong-fu, WANG Yu-meng, YANG Kai-yu, GAO Yin-han, MA Xi-lai. Statistic analysis of cable bundle crosstalk based on polynomial chaos expansion [J]. 吉林大学学报(工学版), 2017, 47(5): 1568-1576.
[7] LIU Xiao-wei, LI Hai, WENG Rui, ZHANG Hai-feng, ZHAO Jun. Application of electrostatic torque to improve dynamic characteristics of novel rotational gyroscope [J]. 吉林大学学报(工学版), 2017, 47(3): 850-854.
[8] LIN Jun, ZHAO Yue, JIANG Chuan-dong, WANG Ying-ji. New surface MRS method based on optimized Block inversion [J]. 吉林大学学报(工学版), 2017, 47(2): 530-539.
[9] ZHANG Fei, SHAN Zhong-de, REN Yong-xin, NIE Jun-gang, LIU Feng. Calibration of line array camera for head defect detection system on cylinder cover [J]. 吉林大学学报(工学版), 2017, 47(2): 540-545.
[10] YIN Yao-bao, YUAN Jia-yang, FU Jun-yong. Characteristics of two-stage relief valve with series damping orifice in the front chamber of pilot valve [J]. 吉林大学学报(工学版), 2017, 47(1): 129-136.
[11] LIN Jun, YANG Yu, HU Xue-yan, WANG Shi-long. Transmitting waveform control technology for transient electromagnetic method based on inductive load [J]. 吉林大学学报(工学版), 2016, 46(5): 1718-1724.
[12] YU Sheng-bao, SU Fa, ZHENG Jian-bo, ZHU Zhan-shan. Design of transient electromagnetic receiving system based on LabVIEW [J]. 吉林大学学报(工学版), 2016, 46(5): 1725-1731.
[13] SHEN Mao-dong, CHENG De-fu, AN Zhan-feng, WANG Yi, ZHAO Jing. Optimization of slanting surfaces of five-sided pyramidal full tensor magnetic gradient probe [J]. 吉林大学学报(工学版), 2016, 46(5): 1732-1738.
[14] LIN Jun, ZHAO Yue, JIANG Chuan-dong, LI Tong, LIU Xiao-nan. Three-dimensional forward modeling with high precision for underground MRS based on Hammer integration [J]. 吉林大学学报(工学版), 2016, 46(2): 609-615.
[15] ZHAO Hong-wei, DONG Xiao-long, ZHANG Lin, HU Xiao-li. Determination of the elastic moduli of bulk materials by four-point bending automatic test [J]. 吉林大学学报(工学版), 2016, 46(1): 140-145.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd