吉林大学学报(工学版) ›› 2017, Vol. 47 ›› Issue (2): 518-523.doi: 10.13229/j.cnki.jdxbgxb201702024

Previous Articles     Next Articles

Effect of grease filling amount on the performance of bearing in high speed motorized spindle

HOU Ping-ping1, WANG Li-qin1, BAI Ying-cun1, PENG Qiu-yang2, HAO Ting1   

  1. 1.School of Mechatronics Engineering, Harbin Institute of Technology, Harbin 150001, China;
    2.Guangzhou Haozhi Industrial Co., Ltd., Guangzhou 511356, China
  • Received:2015-12-24 Online:2017-03-20 Published:2017-03-20

PDF (PC)

331

Abstract: The effects of grease filling amount on the temperature rise, friction torque and vibration performance of bearing were investigated on a high-speed rolling bearing test rig and the use of a BRG3000 bearing torque tester. Test results show that under high speed condition grease filling amount has non-linear relationship with bearing temperature rise, friction torque and vibration, unlike the positive relationship between the grease filling amount and temperature rise under middle and low speed condition. There exists an optimum grease filling amount that results in the best comprehensive performance of the bearing, including temperature rise, friction torque and vibration. Considering a lower temperature rise, the optimum value also results in a lower vibration. Under the given working condition the optimum value is 15% of the free volume, which is less than the 26% free volume recommended by FAG supper precision bearings catalog.

Key words: mechanics, grease filling amount, high speed bearing, bearing performance

CLC Number: 

  • TH117
[1] Wunsch F.高速主轴轴承的微量脂润滑[J].国外轴承, 1991 (2): 63-64.
Wunsch F.Trace grease lubrication of bearing on the high speed motorized spindle[J]. Foreign Bearing, 1991 (2): 63-64.
[2] Abele E, Altintas Y, Brecher C. Machine tool spindle units[J]. CIRP Annals-Manufacturing Technology, 2010, 59(2): 781-802.
[3] Xu Y G, Weng Z Y, You H W, et al. Study on the test method for high temperature and heavy loaded grease bearing life[J].Applied Mechanics and Materials, 2012, 141: 529-533.
[4] Sreenilayam-Raveendran R K, Azarian M H, Pecht M, et al. Detection of under-lubricated ball bearings using vibration signals[J]. Prognostics & Health Management, 2013, 7789(1):1-4.
[5] Interamericana F A G. Rolling bearing lubrication[J]. Publication no WL, 1997, 81(115): 35.
[6] Shawki G S A, Mokhtar M O A. Optimum grease quantity for roller bearing lubrication[J]. Tribology International, 1979, 12(1): 21-24.
[7] Baker C, Marble S, Morton B P, et al. Failure modes and prognostic techniques for H-60 tail rotor drive system bearings[C]∥Aerospace Conference, IEEE, 2007: 1-8.
[8] Cunningham J. Evaluation of the torque performance of a range of space-compatible oils & greases as a function of temperature, speed and lubricant quantity[J]. European Space Agency-Publication-ESA SP, 1999, 438: 35-36.
[9] Oh H, Azarian M H, Morillo C, et al. Failure mechanisms of ball bearings under lightly loaded, non-accelerated usage conditions[J]. Tribology International, 2015, 81: 291-299.
[10] Ma Fang-bo, Li Zhang-mei, Qiu Sheng- change,et al.Transient thermal analysis of grease-lubricated spherical roller bearings[J].Tribology International, 2016, 93: 115-123.
[11] 蒋明俊, 郭小川. 润滑脂性能及应用[M]. 北京:中国石化出版社, 2010: 226-227.
[12] 高荣, 叶佩青, 蒋克荣, 等. 基于小波奇异 性的电主轴振动信号处理[J]. 吉林大学学报: 工学版, 2010,40 (4): 1025-1028.
Gao Rong, Ye Pei-qing, Jiang Ke-rong, et al. Vibration signal processing of motor spindle based on wavelet singularity[J]. Journal of Jilin University(Engineering and Technology Edition),2010, 40 (4): 1025-1028.
[13] Lugt P M. Grease Lubrication in Rolling Bearings[M]. United Kingdom:John Wiley & Sons, 2013:95.
[14] Johnson M. Lubricant application: grease volumes and frequencies[J]. Tribology and Lubrication Technology, 2009, 65(4):20-26.
[15] Lugt P M. A review on grease lubrication in rolling bearings[J]. Tribology Transactions, 2009, 52(4): 470-480.
[16] Ramamurthy S, Krousgrill C M, Sadeghi F. Vibration in grease lubricated bearing systems[J]. Tribology Transactions, 2000, 43(3): 403-410.
[172] 李巍, 胡占齐, 杨育林, 等. 关节轴承寿命试验机在线磨损量检测综合误差建模[J]. 光学精密工程, 2016, 24(4): 844-854.
Li Wei, Hu Zhan-qi, Yang Yu-lin, et al. Comprehensive error modeling of real-time wear-depth detecting of spherical plain bearing tester[J].Optics and Precision Engineering, 2016, 24(4): 844-854.
[18] Cann P M E, Lubrecht A A. Bearing performance limits with grease lubrication: the interaction of bearing design, operating conditions and grease properties[J]. Journal of Physics D: Applied Physics, 2007, 40(18): 5446-5451.
[19] 郑操, 王如意, 蒲延庆. 国内外润滑脂对轴承振动值影响分析[J]. 轴承工业, 2010 (3): 30-32.
Zheng Cao, Wang Ru-yi, Pu Yan-qing. Analysis of grease from home and aboard effect on the bearing vibration[J]. Bearing Industry, 2010 (3): 30-32.
[1] NI Ying-sheng,SUN Qi-xin,MA Ye,XU Dong,LIU Chao. Shear distribution of multi-cell corrugated steel web composite beams based on space grid analysis [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1735-1746.
[2] CHEN Ji-qing, DU Tian-ya, LAN Feng-chong. Numerical analysis of human liver biomechanical response to blunt impacts [J]. 吉林大学学报(工学版), 2018, 48(2): 398-406.
[3] WANG Teng, ZHOU Ming-ru, MA Lian-sheng, QIAO Hong-xia. Fracture grouting crack growth of collapsible loess based on fracture theory [J]. 吉林大学学报(工学版), 2017, 47(5): 1472-1481.
[4] YAN Ya-bin, WANG Xiao-yuan, WAN Qiang. Low-cycle fatigue fracture behavior of nanoscale interface [J]. 吉林大学学报(工学版), 2017, 47(4): 1201-1206.
[5] WANG Zhi-chen, GUO Nai-sheng, ZHAO Ying-hua, CHEN Zhong-da. Dynamic shear modulus prediction of asphalt mastic based on micromechanics [J]. 吉林大学学报(工学版), 2017, 47(2): 459-467.
[6] MENG Guang-wei, FENG Xin-yu, ZHOU Li-ming, Li Feng. Structural reliability analysis based on dimension reduction algorithm [J]. 吉林大学学报(工学版), 2017, 47(1): 174-179.
[7] CHEN Jiang-yi, LIU Bao-yuan. Influence of fiber fracture damage on dispersion characteristic of guided wave in composite plate [J]. 吉林大学学报(工学版), 2017, 47(1): 180-184.
[8] LIAO Jing-ping, ZHANG Jian-fu, YU Ding-wen, FENG Ping-fa. Modeling method of bolted joint interface based on gradient virtual materials [J]. 吉林大学学报(工学版), 2016, 46(4): 1149-1155.
[9] SUN Wei, LI Jian, JIA Shi. Identification of nonlinear stiffness and damping for hard-coating composite structure [J]. 吉林大学学报(工学版), 2016, 46(4): 1156-1162.
[10] CAO Shan-shan, LEI Jun-qing. Fatigue life prediction of steel structure considering interval uncertainty [J]. 吉林大学学报(工学版), 2016, 46(3): 804-810.
[11] LI Jian-qiao, XUE Long, ZOU Meng, ZONG Wei, XIAO Jie. Terra-mechanics characters and development of Martian simulant regolith [J]. 吉林大学学报(工学版), 2016, 46(1): 172-178.
[12] QIAN Zhi-hui, MIAO Huai-bin, REN Lei, REN Lu-quan. Lower limb joint angles of German shepherd dog during foot-ground contact in different gait patterns [J]. 吉林大学学报(工学版), 2015, 45(6): 1857-1862.
[13] ZHUANG Wei-min, XIE Dong-xuan, YU Tian-ming, YU Wan-dong. Numerical simulation of hot forming of high-strength steel based on damage-phase transformation constitutive model [J]. 吉林大学学报(工学版), 2015, 45(4): 1206-1212.
[14] YANG Hui-yan, HE Xiao-cong, ZHOU Sen. Simulation and calculation methods for clinched joint strength [J]. 吉林大学学报(工学版), 2015, 45(3): 864-871.
[15] TIAN Gui-zhong, LIU Zhi-ling, ZHOU Hong-gen, SONG Jiang-chao, ZHU Tao. Quasi-static axial tensile mechanical characteristics of silkworm's anterior silk gland [J]. 吉林大学学报(工学版), 2015, 45(3): 872-877.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] LIN Jun,FU Lei,WANG Yan-zhang,XU Jiang,JI Yan-ju,YANG Meng-meng. Development of sensor used for grounded electrical source air-ground transient electromagnetic detection[J]. 吉林大学学报(工学版), 2014, 44(3): 888 -894 .
[2] LI Jing, ZHANG Jia-xu. Integrated control of vehicle chassis system based on robust L2-L∞/H∞ method[J]. 吉林大学学报(工学版), 2016, 46(6): 1757 -1764 .
[3] LIN Hong-bo, XIAO Zhi-ran, MA Hai-tao. Random-noise attenuation of seismic data by radial time-frequency peak filtering with adaptive window-length[J]. 吉林大学学报(工学版), 2016, 46(6): 2123 -2127 .
[4] LIU Fu,ZONG Yu-xuan,KANG Bing,ZHANG Yi-meng,LIN Cai-xia,ZHAO Hong-wei. Dorsal hand vein recognition system based on optimized texture features[J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1844 -1850 .
[5] SU Han-song,DAI Zhi-tao,LIU Gao-hua,ZHANG Qian-fang. Saliency region detection combining absorbing Markov chain and manifold ranking[J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1887 -1894 .
[6] LI Ju-peng,ZHANG Zu-cheng,LI Mo-yu,MIAO De-fang. Smooth tracking with a kalman filter algorithm for capacitive touch panels[J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1910 -1916 .
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd