吉林大学学报(工学版) ›› 2016, Vol. 46 ›› Issue (6): 1757-1764.doi: 10.13229/j.cnki.jdxbgxb201606001

    Next Articles

Integrated control of vehicle chassis system based on robust L2-L/H method

LI Jing1, ZHANG Jia-xu1, 2   

  1. 1.State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun 130022, China;
    2.R&D Center, China FAW Group Corporation, Changchun 130011, China
  • Received:2015-04-03 Online:2016-11-20 Published:2016-11-20

Abstract:

Based on robust L2-L/H performance criteria for continuous time system, a new approach to design robust L2-L/H controller was proposed, which was then transformed into convex optimal problem with constrains of linear matrix inequalities with low conservative. Using this method, the vehicle chassis integrated control strategy was developed to coordinate active front wheel steering system and active suspension system. Typical cases were simulated using Matlab/Simulink and Carsim. Results show that the robust L2-L/H controller for vehicle chassis integrated system has good control effect, and can significantly improve the stability of the travelling direction and anti-rollover capability of the vehicle.

Key words: vehicle engineering, robust L2-L&#x0221e, /H&#x0221e, control, integrated chassis system, active front wheel steering, active suspension system

CLC Number: 

  • U461
[1] Tang Xin-peng. Study of integrated chassis control system based on virtual prototype simulation[C]∥SAE Paper,2013-01-0424.
[2] Leffler H, Foag W. Prospects and aspects of an integrated chassis management ICM[C]∥SAE Paper, 2000-01-0105.
[3] Nagai M, Yamanaka S, Hirano Y. Integrated control of active rear wheel steering and direct yaw moment control using braking force[J]. JSME International Journal,1999,42(2):301-308.
[4] Ali R K M , Tabatabaei S H, Kazemi R, et al. Integrated control of AFS and DYC in the vehicle yaw stability management system using fuzzy logic control[C]∥SAE Paper,2008-01-1262.
[5] Yoon S H, Jung J H, Koo B K, et al. Development of rollover prevention system using unified chassis control of ESP and CDC systems[C]∥SAE Paper,2006-01-1276.
[6] Odenthal D, Bunte T, Ackerman J. Nonlinear steering and braking control for vehicle rollover avoidance[C]∥In Proc European Control Conference, Karlsruhe,1999:598-603.
[7] 俞立. 鲁棒控制-线性矩阵不等式处理方法[M]. 北京:清华大学出版社,2002.
[8] 杨志红,马广富,李传江. 基于扩展LMI的多目标 H 2 /H ∞ 状态反馈控制综合[J]. 电机与控制学报,2004(4):333-337.
Yang Zhi-hong, Ma Guang-fu, Li Chuan-jiang. Multi-objective H 2 /H ∞ state feedback control synthesis based on extended LMI characterizations[J]. Electric Machines and Control,2004(4):333-337.
[9] Gao Hui-jun, Wang Chang-hong. New approach to robust L 2 -L ∞ filter design for uncertain continuous-time systems[J]. ACTA Automatica Sinica, 2003,29(6):809-813.
[10] Shibahata Y, Shimada K, Tomari T. Improvement of vehicle maneuverability by direct yaw moment control[J]. Vehicle System Dynamics, 1993,22(5):465-481.
[11] Ackermann J, Odenthal D. Robust steering control for active rollover avoidance of vehicles with elevated center of gravity[C]∥Proceedings of International Conference on Advances in Vehicle Control and Safety, Amiens, France, 1998:118-123.
[12] 朱天军,宗长富,吴炳胜,等. 基于改进TTR算法的重型车辆侧翻预警系统[J]. 机械工程学报, 2011,47(10):88-94.
Zhu Tian-jun, Zong Chang-fu, Wu Bing-sheng, et al. Rollover warning system of heavy duty vehicle based on improved TTR algorithm[J]. Journal of Mechanical Engineering, 2011,47(10):88-94.
[13] Liebemann E K, Meder K, Schuh J, et al. Safety and performance enhancement: the bosch electronic stability control(ESP)[C]∥SAE Paper,2004-21-0060.
[14] NHTSA-2012-0065. Electronic stability control systems for heavy vehicles[S].
[15] Howe J G, Garrott W R, Forkenbrock G J. An expermental examination of selected test maneuvers that may induce on-road, untripped light vehicle rollover-phase I-A of NHTSA's 1997-1998 light vehicle rollover research program[R]. USA:National Highway Traffic Safety Administration, 1999.
[1] CHANG Cheng,SONG Chuan-xue,ZHANG Ya-ge,SHAO Yu-long,ZHOU Fang. Minimizing inverter capacity of doubly-fed machine driving electric vehicles [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1629-1635.
[2] XI Li-he,ZHANG Xin,SUN Chuan-yang,WANG Ze-xing,JIANG Tao. Adaptive energy management strategy for extended range electric vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1636-1644.
[3] HE Ren,YANG Liu,HU Dong-hai. Design and analysis of refrigeration system supplied by solar auxiliary power of refrigerator car [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1645-1652.
[4] NA Jing-xin,MU Wen-long,FAN Yi-sa,TAN Wei,YANG Jia-zhou. Effect of hygrothermal aging on steel-aluminum adhesive joints for automotive applications [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1653-1660.
[5] LIU Yu-mei,LIU Li,CAO Xiao-ning,XIONG Ming-ye,ZHUANG Jiao-jiao. Construction on collision avoidance model of bogie dynamic simulation test bench [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1661-1668.
[6] QU Da-yi,YANG Jing-ru,BING Qi-chun,WANG Wu-lin,ZHOU Jing-chun. Arterial traffic offset optimization based on queue characteristics at adjacent intersections [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1685-1693.
[7] JIANG Tao,LIN Xue-dong,LI De-gang,YANG Miao,TANG Xue-lin. Effect of control parameters on heat release rate with ANN method [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1747-1754.
[8] GU Wan-li,WANG Ping,HU Yun-feng,CAI Shuo,CHEN Hong. Nonlinear controller design of wheeled mobile robot with H performance [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1811-1819.
[9] LI Zhan-dong,TAO Jian-guo,LUO Yang,SUN Hao,DING Liang,DENG Zong-quan. Design of thrust attachment underwater robot system in nuclear power station pool [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1820-1826.
[10] ZHAO Shuang,SHEN Ji-hong,ZHANG Liu,ZHAO Han,CHEN Ke-fan. Evaluation of surface roughness of micro electrical discharge machining based-on fast Gauss algorithm [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1838-1843.
[11] ZHOU Yan-guo,ZHANG Hai-lin,CHEN Rui-rui,ZHOU Tao. Two-level game approach based resource allocation scheme in cooperative networks [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1879-1886.
[12] ZHAO Wei-qiang, GAO Ke, WANG Wen-bin. Prevention of instability control of commercial vehicle based on electric-hydraulic coupling steering system [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1305-1312.
[13] NA Jing-xin, PU Lei-xin, FAN Yi-sa, SHEN Chuan-liang. Effect of temperature and humidity on the failure strength of Sikaflex-265 aluminum adhesive joints [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1331-1338.
[14] WANG Yan, GAO Qing, WANG Guo-hua, ZHANG Tian-shi, YUAN Meng. Simulation of mixed inner air-flow integrated thermal management with temperature uniformity of Li-ion battery [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1339-1348.
[15] KUI Hai-lin, BAO Cui-zhu, LI Hong-xue, LI Ming-da. Idling time prediction method based on least square support vector machine [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1360-1365.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] LIU Song-shan, WANG Qing-nian, WANG Wei-hua, LIN Xin. Influence of inertial mass on damping and amplitude-frequency characteristic of regenerative suspension[J]. 吉林大学学报(工学版), 2013, 43(03): 557 -563 .
[2] WANG Tong-jian, CHEN Jin-shi, ZHAO Feng, ZHAO Qing-bo, LIU Xin-hui, YUAN Hua-shan. Mechanical-hydraulic co-simulation and experiment of full hydraulic steering systems[J]. 吉林大学学报(工学版), 2013, 43(03): 607 -612 .
[3] ZHANG Chun-qin, JIANG Gui-yan, WU Zheng-yan. Factors influencing motor vehicle travel departure time choice behavior[J]. 吉林大学学报(工学版), 2013, 43(03): 626 -632 .
[4] XIAO Rui, DENG Zong-cai, LAN Ming-zhang, SHEN Chen-liang. Experiment research on proportions of reactive powder concrete without silica fume[J]. 吉林大学学报(工学版), 2013, 43(03): 671 -676 .
[5] CHEN Si-guo, JIANG Xu, WANG Jian, LIU Yan-heng, DENG Wei-wen, DENG Jun-yi. Mashup of vehicular ad-hoc network and universal mobile telecommunications system[J]. 吉林大学学报(工学版), 2013, 43(03): 706 -710 .
[6] MENG Chao, SUN Zhi-xin, LIU San-min. Multiple execution paths for virus based on cloud computing[J]. 吉林大学学报(工学版), 2013, 43(03): 718 -726 .
[7] XIAN Shu, ZHENG Jin, LU Xing, ZHANG Shi-peng. Identification approach of P2P flow based on the content redistribution model[J]. 吉林大学学报(工学版), 2013, 43(03): 727 -733 .
[8] LYU Yuan-zhi, WANG Shi-gang, YU Jue-qiong, WANG Xiao-yu, LI Xue-song. Display characteristics of one-dimensional integral imaging in virtual mode based on lenticular lens array[J]. 吉林大学学报(工学版), 2013, 43(03): 753 -757 .
[9] WANG Dan, LI Yang, NIAN Gui-jun, WANG Ke. An inhomogeneity mask for spatial watermarking[J]. 吉林大学学报(工学版), 2013, 43(03): 771 -775 .
[10] FENG Lin-han, QIAN Zhi-hong, SHANG Ke-cheng, ZHU Shuang. Improved hidden node collision avoidance strategy based on IEEE802.15.4[J]. 吉林大学学报(工学版), 2013, 43(03): 776 -780 .