基于数值仿真的大型塔式磨机工作特性分析

doi:10.13229/j.cnki.jdxbgxb20210466

Abstract

Abstract:

To precisely evaluate key working performance such as driving power， the stress state of the screw with liners， and product particle size distribution of large vertical screw stirring mill， a fluid-structure interaction method （CFD-DEM coupling） was conducted for the calculation. To be more specific， the particle motion distribution， interactive force distribution， collision rate， and power consumption were evaluated under different working conditions. Furthermore， the load applied on the screw with liner was extracted from coupled simulations into FEM calculations for the stress state analysis based on which the value and distribution of maximum stress were studied. Besides， a numerical model was constructed for the prediction of product particle size distribution of vertical screw stirring mill to accomplish the evaluations of the impact of different milling parameters on the results. Field tests were taken for the validation of the effectiveness of coupling simulations based on the data of driving power under different amounts of milling balls. Lab experiments were conducted for the determination of the parameters applied in the theoretical model. According to the fitting results of the lab data， a numerical calculation program was established for the prediction of product particle size distribution under different milling conditions. The analysis results indicate that the rotate speed of screw with liner， the filling rate， and the size of milling ball are the main factors that have complex influence on the working performance of a vertical screw stirring mill.

Key words: mechanical design, vertical screw stirring mill, working performance, fluid-structure interaction, numerical simulation

CLC Number:

TD453

Zong-wei YAO,Xu-dong GAO,Gang LIU,Qiu-shi BI. Research on working performance of vertical screw stirring mill based on numerical simulations[J].Journal of Jilin University(Engineering and Technology Edition), 2021, 51(5): 1642-1650.

Figures/Tables 16

Fig.1

Table 1

Table 2

Fig.2

Fig.3

Fig.4

Fig.5

Fig.6

Fig.7

Table 3

Fig.8

Fig.9

Table 4

Fitting results of grinding model"

组别	A/min^-1	$α$	$?$	$γ$	$β$
1	2.980	1.35	0.32	5.80	0.45
2	2.364	1.34	0.32	5.81	0.45
3	2.112	1.35	0.31	5.78	0.44
4	1.956	1.36	0.32	5.80	0.46
5	1.174	1.35	0.33	5.82	0.45
6	1.890	1.33	0.32	5.79	0.46

Table 4

Table 5

Fig.10

Fig.11

References 18

1	Oliveira A L R, Rodriguez V A, de Carvalho R M, et al. Mechanistic modeling and simulation of a batch vertical stirred mill[J]. Minerals Engineering, 2020, 156: 106487.
2	Daraio D, Villoria J, Ingram A, et al. Investigating grinding media dynamics inside a vertical stirred mill using the discrete element method: effect of impellerarm length[J]. Powder Technology, 2020, 364: 1049-1061.
3	Larsson S, Palsson B I, Parian M, et al. A novel approach for modelling of physical interactions between slurry, grinding media and mill structure in wet stirred media mills[J]. Minerals Engineering, 2020, 148: 106180.
4	Prziwara P, Breitung-Faes S, Kwade A. Impact of the powder flow behavior on continuous fine grinding in dry operated stirred media mills[J]. Minerals Engineering, 2018, 128: 215-223.
5	Flach F, Breitung-Faes S, Kwade A. Model based process optimization of nanosuspension preparation via wet stirred media milling[J]. Powder Technology, 2018, 331: 146-154.
6	毕秋实, 王国强, 黄婷婷, 等. 基于DEM-FEM耦合的双齿辊破碎机辊齿强度分析[J]. 吉林大学学报: 工学版, 2018, 48(6): 1770-1776.
	Bi Qiu-shi, Wang Guo-qiang, Huang Ting-ting, et al. Tooth strength analysis of mineral sizer by coupling discrete element method and finite element method[J] Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1770-1776.
7	于向军, 槐元辉, 李学飞, 等. 基于克里金和粒子群算法的装载机铲掘轨迹规划[J]. 吉林大学学报: 工学版, 2020, 50(2): 437-444.
	Yu Xiang-jun, Huai Yuan-hui, Li Xue-fei, et al. Shoveling trajectory planning method for wheel loader based on kriging and particle swarm optimization[J]. Journal of Jilin University(Engineering and Technology Edition), 2020, 50(2): 437-444.
8	王同建, 杨书伟, 谭晓丹, 等. 基于DEM-MBD联合仿真的液压挖掘机作业性能分析[J/OL]. [2021-05-28].
9	石立, 张国旺, 肖骁. 立式螺旋搅拌磨机的启动力矩研究[J]. 矿山机械, 2013, 41(7): 68-71.
	Shi Li, Zhang Guo-wang, Xiao Xiao. Study on staring torque of vertical screw stirring mill[J] Mining & Processing Equipment, 2013, 41(7): 68-71.
10	张国旺, 黄圣生. 超细搅拌磨机的流场模拟和应用[J].矿山机械, 2008, 36(21): 78-83.
	Zhang Guo-wang, Huang Sheng-sheng. Flow-field numerical simulation and application of ultra-fine stirred mill[J]. Mining & Processing Equipment, 2008, 36(21): 78-83.
11	宁晓斌, 孙新明, 佘翊妮, 等. 搅拌磨DEM-CFD耦合仿真研究及搅拌器强度分析[J]. 有色金属工程, 2016, 6(4): 63-67, 72.
	Ning Xiao-bin, Sun Xin-ming, She Yi-ni, et al. Research on multidisciplinary coupling simulation of the vertical stirred mill based on DEM-CFD and analysis of the screw agitator structural strength[J]. Nonferrous Metals Engineering, 2016, 6(4): 63-67, 72.
12	母福生, 董方, 史金东, 等. 塔式磨机磨矿机理及关键参数研究[J]. 中国机械工程, 2011, 22(7): 815-817.
	Mu Fu-sheng, Dong Fang, Shi Jin-dong, et al. Analysis of DEM numerical simulation of media movement for a stirred mill[J]. China Mechanical Engineering, 2011, 22(7): 815-817.
13	黄胤淇. 磨矿条件对立式搅拌磨磨矿产品粒度特性的影响及应用[D]. 昆明: 昆明理工大学国土资源工程学院, 2019.
	Huang Yin-qi. Influence and application of influence of grinding conditions on particle characters of vertical stirred mill[D] Kunming: Kunming University of Science and Technology, Faculty of Land Resource Engineering of KUST, 2019.
14	Sousani M, Hobbs A M, Anderson A, et al. Accelerated heat transfer simulations using coupled DEM and CFD[J]. Powder Technology, 2019, 357: 367-376.
15	Jankovic A, Valery W, Clarke G. Design and implementation of an AVC grinding circuit at BHP billiton cannington[C]∥Fourth International Conference on Autogenous and Semiautogenous Grinding Technology(SAG 2006). Vancouver: University of British Columbia, 2006: 290-300.
16	King R P. Modeling and Simulation of Mineral Processing Systems[M]. Elsevier, 2001.
17	Hasan M, Palaniandy S, Hilden M, et al. Simulating product size distribution of an industrial scale VertiMill® using a time-based population balance model[J]. Minerals Engineering, 2018, 127: 312-317.
18	Hasan M, Palaniandy S, Hilden M, et al. Calculating breakage parameters of a batch vertical stirred mill[J]. Minerals Engineering, 2017, 111: 229-237.

Related Articles 15

[1]	Jing HU,Cong LI,Bang-cheng ZHANG,Xiao-li QIAO,Xin-ming ZHANG,Xiao-ping ZHOU. Oil film stiffness and damping of double⁃decker ball bearing in consideration of centrifugal expansion [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(5): 1601-1611.
[2]	Wei CHEN,Yu-long LEI,Xing-zhong LI,Yao FU,Jian-long HU,Li-guo HOU. Calculation of adhesive wear of involute cylindrical spur gear under low⁃speed conditions [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(5): 1628-1634.
[3]	Zheng-lei YU,Li-xin CHEN,Ze-zhou XU,Ren-long XIN,Long MA,Jing-fu JIN,Zhi-hui ZHANG,Shan JIANG. Analysis of mechanical characteristics and recovery characteristics of bionic protective structures based on additive manufacturing [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(4): 1540-1547.
[4]	Zheng-lei YU,Ren-long XIN,Li-xin CHEN,Yi-ning ZHU,Zhi-hui ZHANG,Qing CAO,Jing-fu JIN,Jie-liang ZHAO. Load bearing characteristics of honeycomb protection structure [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(3): 1140-1145.
[5]	Ya-feng GONG,Yun-ze PANG,Bo WANG,Guo-jin TAN,Hai-peng BI. Mechanical properties of new prefabricated box culvert structure based on road conditions in Jilin Province [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(3): 917-924.
[6]	Xiao-tao LI,Jin-peng REN,Xiao-xu LI,Hang YANG. Mechanism of a linear actuator driven by dual piezoelectric oscillators in inverse mode [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(2): 468-471.
[7]	Chang SU,Ying HAN,Ying-chao ZHANG,Zhen-hua MIAO. Influence performance with wheel spoke design parameters of vehicle aerodynamic [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(1): 107-113.
[8]	Xin CHEN,Ning WANG,Chuan-liang SHEN,Xiao FENG,Chang-hai YANG. Effect of rearview mirror modeling on aerodynamic noise of front window [J]. Journal of Jilin University(Engineering and Technology Edition), 2020, 50(2): 426-436.
[9]	Gong CHENG,Ke XIAO,Jia-xu WANG,Wei PU,Yan-feng HAN. Gear contact stiffness under mixed lubrication status [J]. Journal of Jilin University(Engineering and Technology Edition), 2020, 50(2): 494-503.
[10]	Zheng-wei GU,Lin CHEN,Li-hui ZHAO,Hong XU,Xin LI,Ge YU. Simulation of stamping process of some reinforcement plate below windows of railway vehicles [J]. Journal of Jilin University(Engineering and Technology Edition), 2020, 50(2): 504-511.
[11]	Yan MAO,Kai CHENG. Telescoping path optimization of a single-cylinder pin⁃type multi⁃section boom based on Hopfield neural network [J]. Journal of Jilin University(Engineering and Technology Edition), 2020, 50(1): 53-65.
[12]	Zhen GUO,Hong-ying YU,Zhong-xin HUA,Di ZHAO. Kinematic analysis and simulation of folding process for rigid origami mechanisms [J]. Journal of Jilin University(Engineering and Technology Edition), 2020, 50(1): 66-76.
[13]	Ya-feng GONG,Bo WANG,Guo-jin TAN,Li-min ZHANG,Wen-ding WU,Hai-peng BI. Comparative analysis of mechanical characteristics of two typical fabricated culverts in Jilin [J]. Journal of Jilin University(Engineering and Technology Edition), 2019, 49(6): 1865-1870.
[14]	Wei-ping SHI,Xu ZHAO,Xing-jun HU,Tian-ming YU,Bo-wen LIU,Yan DUAN. Design and numerical simulation of water restriction device AICD for natural gas exploitation [J]. Journal of Jilin University(Engineering and Technology Edition), 2019, 49(6): 1986-1991.
[15]	Fu-chun JIA,Xian-jie MENG,Yu-long LEI. Optimal design of two degrees of freedom dynamic vibration absorber based on multi-objective genetic algorithm [J]. Journal of Jilin University(Engineering and Technology Edition), 2019, 49(6): 1969-1976.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

Comments

Recommended 0

No Suggested Reading articles found!

结构参数	数值
筒体外径/mm	4500
筒体内径/mm	4200
筒体高度/mm	4775
搅拌器直径/mm	3300
搅拌器轴径/mm	550
法兰盘直径/mm	1000
叶片边缘厚度/mm	100
螺旋个数	2
螺旋导程/mm	2900
搅拌器与筒体底部距离/mm	420

仿真参数	数值
矿石比重	3200
筒体/钢球恢复系数	0.8
筒体/钢球静摩擦系数	0.25
筒体/钢球滚动摩擦系数	0.5
整体仿真时间/s	6

试验磨机参数	数值
筒体外径/mm	350
筒体内径/mm	336
筒体高度/mm	425
搅拌器直径/mm	256
搅拌器轴径/mm	48
螺旋个数	2
导程/mm	235
搅拌器与筒底距离/mm	42

参数	试验组
参数	1	2	3	4	5	6
钢球尺寸/mm	10	12	10	10	12	10
尖端速度/（m·s^-1）	1.608	1.608	1.474	1.608	1.474	1.541
比功耗/（kW·h·t^-1）	2.45	2.38	2.23	2.01	1.81	1.89
计算数值/min^-1	2.956	2.260	2.166	2.132	1.232	1.786
拟合数值/min^-1	2.980	2.364	2.112	1.956	1.174	1.890

Research on working performance of vertical screw stirring mill based on numerical simulations

RICH HTML

PDF (PC)