Journal of Jilin University(Engineering and Technology Edition) ›› 2022, Vol. 52 ›› Issue (7): 1552-1560.doi: 10.13229/j.cnki.jdxbgxb20210142
Jia-xu ZHANG1,2(),Chong GUO1,Chen WANG1,Jian ZHAO1(),Xin-zhi WANG1
CLC Number:
1 | Tan J Y, Xu C L, Li L, et al. Guidance control for parallel parking tasks[J]. IEEE/CAA Journal of Automatica Sinica, 2020, 7(1): 301-306. |
2 | Li B, Wang K X, Shao Z J. Time optimal maneuver planning in automatic parallel parking using s simultaneous dynamic optimization approach[J]. IEEE Transactions on Intelligent Transportation Systems, 2016, 17(11): 3263-3274. |
3 | Suhr J K, Jung H G. Automatic parking space detection and tracking for underground and indoor environments[J]. IEEE Transactions on Industrial Electronics, 2016, 63(9): 5687-5698. |
4 | Jang C, Kim C, Lee S, et al. Re-plannable automated parking system with a standalone around view monitor for narrow parking lots[J]. IEEE Transactions on Intelligent Transportation Systems, 2020, 21(2): 777-790. |
5 | 张家旭, 赵健, 施正堂, 等. 基于回旋曲线的垂直泊车轨迹规划与跟踪控制[J]. 东南大学学报:自然科学版, 2020, 50(1): 182-191. |
Zhang Jia-xu, Zhao Jian, Shi Zheng-tang, et al. Trajectory planning and tracking control perpendicular parking based on clothoid curve[J]. Journal of Southeast University (Natural Science Edition), 2020, 50(1): 182-191. | |
6 | Zhang X J, Liniger A, Sakai A, et al. Autonomous parking using optimization-based collision avoidance[C]∥IEEE Conference on Decision and Control, Miami Beach, USA, 2018: 4627-4632. |
7 | Zips P, Bock M, Kugi A. Optimisation based path planning for car parking in narrow environments[J]. Robotics and Autonomous Systems, 2016, 79: 1-11. |
8 | Du X X, Tan K K. Autonomous reverse parking system based on robust path generation and improved sliding model control[J]. IEEE Transactions on Intelligent Transportation Systems, 2015, 16(3): 1225-1237. |
9 | 张家旭, 赵健, 施正堂, 等. 采用hp自适应伪谱法的全自动泊车系统轨迹规划与跟踪控制[J]. 西安交通大学学报, 2020, 54(6): 176-184. |
Zhang Jia-xu, Zhao Jian, Shi Zheng-tang, et al. A trajectory planning and tracking control method for fully-automatic parking system using hp-adaptive pseudo spectral method[J]. Journal of Xi'an Jiaotong University, 2020, 54(6): 176-184. | |
10 | Sun C Y, Zhang X, Xi L H, et al. Design of a path-tracking steering controller for autonomous vehicles[J]. Energies, 2018, 11(6): 1-17. |
11 | . Intelligent transport systems—assisted parking system (APS)—performance requirements and test procedures [S]. |
12 | IVISTA-APS, 2019. 智能泊车辅助系统性能要求和测试规程(征求意见稿) [S]. |
13 | 周莎, 钟颖, 闫晓雷. 自动泊车系统性能评价方法[J]. 长安大学学报:自然科学版, 2020, 40(2): 109-116. |
Zhou Sha, Zhong Ying, Yan Xiao-lei. Evaluation method of automatic parking system performance[J]. Journal of Chang'an University (Natural Science Edition), 2020, 40(2): 109-116. | |
14 | Reeds J, Shepp L. Optimal paths for a car that goes both forwards and backwards[J]. Pacific Journal of Mathematics, 1990, 145(2): 367-393. |
15 | Zhang J X, Shi Z T, Yang X, et al. Trajectory planning and tracking control for autonomous parallel parking of a non-holonomic vehicle[J]. Measurement and Control, 2020, 50(1): 182-191. |
16 | 张家旭, 赵健, 施正堂, 等. 基于回旋曲线的平行泊车路径规划与跟踪控制[J]. 吉林大学学报:工学版, 2020, 50(6): 2247-2257. |
Zhang Jia-Xu, Zhao Jian, Shi Zheng-tang, et al. Path planning and tracking control for parallel parking based on clothoid curve[J]. Journal of Jilin University (Engineering and Technology Edition), 2020, 50(6): 2247-2257. | |
17 | Tan J Y, Xu C L, Li L, et al. Guidance control for parallel parking tasks[J]. IEEE/CAA Journal of Automatica Sinica, 2020, 7(1): 301-306. |
18 | Jeong Y, Kim S, Jo B R, et al. Sample based vehicle motion planning for autonomous valet parking with moving obstacles[J]. International Journal of Automotive Engineering, 2018, 9(4): 215-222. |
[1] | Hong-bo YANG,Wen-ku SHI,Zhi-yong CHEN,Nian-cheng GUO,Yan-yan ZHAO. Optimization of tooth surface modification based on a two-stage reduction gear system [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(7): 1541-1551. |
[2] | Shuai HAO,Chuan-tai CHENG,Jun-nian WANG,Jun-yuan ZHANG,You YU. Ergonomic optimization and test evaluation of sports SUV cockpit layout design [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(7): 1477-1488. |
[3] | Chen HUA,Run-xin NIU,Biao YU. Methods and applications of ground vehicle mobility evaluation [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(6): 1229-1244. |
[4] | Xiong LI,Feng-chong LAN,Ji-qing CHEN,Fang TONG. Comparison of injuries in front impact between Hybird III dummy model and CHUBM human biomechanical model [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(6): 1264-1272. |
[5] | Ying-chao ZHANG,Yun-hang LI,Zi-yu GUO,Guo-hua WANG,Zhe ZHANG,Chang SU. Optimization of the aerodynamic drag reduction of a cab behind engine vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(4): 745-753. |
[6] | Wen-ku SHI,Shu-guang ZHANG,You-kun ZHANG,Zhi-yong CHEN,Yi-fei JIANG,Bin-bin LIN. Parameter identification of magnetorheological damper model with modified seagull optimization algorithm [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(4): 764-772. |
[7] | Wei-min ZHUANG,Shen CHEN,Di WU. Influence of strengthening form of CFRP on transverse impact performance of steel tube [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(4): 819-828. |
[8] | Jie LI,Tao CHEN,Wen-cui GUO,Qi ZHAO. Pseudo excitation method of vehicle non-stationary random vibration in space domain and its application [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(4): 738-744. |
[9] | Wei LI,Hai-sheng SONG,Hao-yu LU,Wen-ku SHI,Qiang WANG,Xiao-jun WANG. Linear identification method of hysteresis characteristic of composite leaf springs [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(4): 829-836. |
[10] | Liang DUAN,Chun-yuan SONG,Chao LIU,Wei WEI,Cheng-ji LYU. State recognition in bearing temperature of high-speed train based on machine learning algorithms [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(1): 53-62. |
[11] | Wei-min ZHUANG,Shen CHEN,Nan WANG. Influence on thermal stress of autobody steel-aluminum clinch-adhesive connection structure [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(1): 70-78. |
[12] | Jian-bin CHEN,Song-ze ZHOU,Feng-yong FEI,Yong-long CHEN,Guo-ping LING. Influences of interference fit and knurling connection type on press fitting failure of assembled camshaft [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(6): 1959-1966. |
[13] | Xing-jun HU,Jing-long ZHANG,Yu-fei LUO,Li XIN,Sheng LI,Jin-rui HU,Wei LAN. Influence investigation of cooling tube structure and airflow direction on thermal⁃hydraulic performance of air⁃cooled charge air cooler [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(6): 1933-1942. |
[14] | Yong LUO,Yong-heng WEI,Huan HUANG,Ren-jie XIAO,Lin REN,Huan-yu CUI. Starting control of P2.5 plug⁃in hybrid configuration dual⁃clutch based on driver's intention recognition [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(5): 1575-1582. |
[15] | Xiao-hua ZENG,Mei-jie SONG,Da-feng SONG,Yue WANG. Data processing method of bus driving cycle based on vehicular network information [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(5): 1692-1699. |
|