吉林大学学报(工学版) ›› 2015, Vol. 45 ›› Issue (6): 1844-1851.doi: 10.13229/j.cnki.jdxbgxb201506017
甘心， 殷琨， 何将福， 殷其雷
GAN Xin, YIN Kun, HE Jiang-fu, YIN Qi-lei
摘要：
研制了大直径贯通式潜孔锤及反循环钻头,并进行模拟仿真电算及现场试验。试验结果表明:潜孔锤最高钻进效率可达6 m/h;平均钻进效率为4.5 m/h,且反循环排渣顺畅、井底无沉渣、成井质量好,可以解决大直径应急救援井的碎岩和排渣两大难题,能够充分满足应急救援井对钻进效率和成井质量的要求。
中图分类号:
| [1] 岳中琦. 地下工程事故紧急搜救的快速气冲钻孔和实时监测[J]. 黑龙江科技学院学报,2012,22(4):403-408. Yue Zhong-qi. Monitoring and air-driven fast-track drilling designed for emergent searching and rescuing operation in buried underground space[J]. Journal of Heilongjiang Institute of Science & Technology, 2012,22(4):403-408. [2] 王志坚. 矿山钻孔救援技术的研究与务实思考[J]. 中国安全生产科学技术,2011,7(1):5-9. Wang Zhi-jian. Considering and researching of drilling technology in mine rescue[J]. Journal of Safety Science and Technology,2011,7(1):5-9. [3] 宋元明,刘志军,王万生. 快速钻孔技术在煤矿应急救援中的实践[J].中国安全科学学报,2004,14(6):63-65. Song Yuan-ming,Liu Zhi-jun, Wang Wan-sheng. Practice of quick drill in coal mine emergency rescue[J]. China Safety Science Journal, 2004,14(6):63-65. [4] Kirk G, Muzondo T, Harney D. Improved grade control using reverse circulation drilling at Mogalakwena Platinum mine, South Africa[C]∥Proceedings of 8th International Mining Geology Conference,Australia,2011:329-340. [5] 黄勇,殷琨,朱丽红,等. 大直径潜孔锤气力反循环流体速度与压力模型[J]. 吉林大学学报:地球科学版,2011,41(1):232-236. Huang Yong,Yin Kun, Zhu Li-hong,et al. Velocity and pressure model of large-diameter DTH hammer pneumatic reverse circulation fluid[J]. Journal of Jilin University:Earth Science Edition,2011,41(1):232-236. [6] Bo K, Wang M S, Zhao Z Q. Numerical simulation on bottom hole flow fields of reverse circulation bit[J]. Applied Mechanics and Materials,2012,256-259:2826-2830. [7] 殷琨,王茂森,彭枧明,等. 冲击回转钻进[M]. 北京:地质出版社,2010:46-48. [8] 熊青山,殷琨,祁宏军,等. 可视化无阀式风动潜孔锤仿真电算软件设计[J].吉林大学学报:地球科学版,2003,33(4):571-574. Xiong Qing-shan, Yin Kun, Qi Hong-jun, et al. Visual simulation zooming software design valveless pneumatic DTH[J]. Journal of Jilin University: Earth Science Edition,2003,33(4):571-574. [9] 赵承庆,姜毅.气体射流动力学[M]. 北京:北京理工大学出版社,1998:74-77. [10] Yadav R L, Patwardhan A W. Design aspects of ejectors: Effects on suction chamber geometry[J]. Chemical Engineering Science,2008,63(15):3886-3897. [11] Lucas C, Koehler J, Schroder A,et al. Experimentally validated CO 2 ejector operation characteristic used in a numerical investigation of ejector cycle[J]. International Journal of Refrigeration,2013,36:881-891. [12] 刘益才,曹立宏,马卫武,等. 冰箱喷射器最优喷射系数分析[J]. 中南大学学报:自然科学版,2009,40(2): 329-333. Liu Yi-cai,Cao Li-hong,Ma Wei-wu,et al. Optimum eject-coefficient of refrigerator-ejector[J]. Journal of Central South University: Science and Technology,2009,40(2):329-333. [13] 范黎明,殷琨,张永光,等. 基于引射原理的侧吸式反循环钻头结构参数数值研究[J]. 中南大学学报:自然科学版,2011,42(1):220-226. Fan Li-ming, Yin Kun,Zhang Yong-guang,et al. Numerical investigation of geometry parameters onside-ejector DTH hammer RC bit[J]. Journal of Central South University:Science and Technology, 2011,42(1):220-226. [14] 王茂森.全孔反循环潜孔锤参数优化及其钻进工艺研究[D].长春:吉林大学建设工程学院,2007. Wang Mao-seng. The parameters optimization of the reverse circulation DTH hammer and studies on its drilling technique[D]. Changchun: College of Construction Engineering,Jilin University, 2007. [15] 刘建林.气体钻井用贯通式潜孔锤关键技术研究[D].长春:吉林大学建设工程学院,2009. Liu Jian-lin. Researches on the key technologies of hollow-through DTH used in gas drilling[D]. Changchun:College of Construction Engineering, Jilin University,2009. [16] 刘建林. 专用反循环钻头内喷孔结构设计研究[J].石油机械,2012,40(6):7-12. Liu Jian-lin. Structural design of the internal jet orifice for special reverse circulation drill bit[J]. China Petroleum Machinery,2012,40(6):7-12. |
| [1] | 甘心, 殷琨, 李鹏, 罗永江. 多层采空区钻探用GQ-142贯通式潜孔锤研制及试验[J]. 吉林大学学报(工学版), 2016, 46(3): 845-852. |
|