吉林大学学报(工学版) ›› 2003, Vol. ›› Issue (2): 95-99.

• 论文 • 上一篇    下一篇

土壤深松技术及高效节能仿生研究的发展

朱凤武, 佟金   

  1. 吉林大学, 地面机械仿生技术教育部重点实验室, 吉林 长春 130025
  • 收稿日期:2002-11-25
  • 基金资助:
    国家杰出青年科学基金资助项目(50025516);教育部科学技术研究重点项目(00039)。

Development of high-efficient and energy-saving bionic bubsoiling techniques

ZHU Feng-wu, TONG Jin   

  1. The Key Laboratory for Terrain-machine Bionics Engineering, The Ministry of Education, Jilin University, Changchun 130025, China
  • Received:2002-11-25

摘要: 深松技术是旱地保护性耕作体系中的重要技术措施之一,高效节能是深松技术的发展方向。本文介绍了土壤深松的作用、深松机具类型和深松机具高效节能技术措施研究及应用现状;分析了基于土壤洞穴动物足趾结构和力学性能的深松机具仿生研究的发展趋势。

关键词: 土壤, 深松, 高效节能技术, 仿生

Abstract: Subsoiling is an important technique of conservation tillage systems on dry land.It is required that developing high efficient and energy saving subsoiling techniques.The effectiveness of subsoiling,the types of subsoilers,and the status of the high efficient and energy saving subsoiling techniques were reviewed and developing trends of bionic research of subsoilers based on the claw structures and mechanical behavior of soil burrowing animals were analyzed,including the resistance reducing bionics for energy saving purpose and smashing bionics for high efficiency.

Key words: soil, subsoiling, high-efficient and energy-saving technique, bionics

中图分类号: 

  • S219.01
[1] GILL W R,VANDEN BERG G E.Soil dynamics in tillage and traction[M].Agriculture Handbook No.316,United States Department of Agriculture,1967.
[2] 丁昆仑.深松对土壤水分物理特性及夏玉米生长的影响[J].中国农村水利水电,1997(7):13-16.
[3] HENDERSON H D,ALMASSI M,MALIK A A,et al.Deep tillage in the Beqa′a valley,Lebanon[J].Transactions of the ASAE,1981,23(6):1466-1470.
[4] 廖植樨,邓健,谷谒白,等.全方位深松对土壤物理化学性质的影响[J].北京农业工程大学学报,1995,15(1):18-24.
[5] 邵长发,郑志安,林启瑞.全方位深松在农业可持续发展中的作用研究[J].农业机械学报,1999,30(5):81-85.
[6] 丁昆仑,HANN M J.耕作措施对土壤特性及作物产量的影响[J].农业工程学报,2000,16(3):28-31.
[7] 李洪文,陈君达,李问盈.保护性耕作条件下深松技术研究[J].农业机械学报,2000,31(6):42-45.
[8] PIKUL J L,AASE J K.Wheat response and residual soil properties following subsoiling of a sandy loam in eastern Montana[J].Soil & Tillage Research,1999,51(1):61-70.
[9] IBRAHIM B A,MILLER D E.Effect of subsoiling and quality of corn and potato at two irrigation frequencies[J].Soil Science Society of America Journal,1989,53(1):247-251.
[10] REEDER R C,WOOD R K,FINCK C L.Five subsoiler designs and their effects on soil properties and crop yields[J].Transactions of the ASAE,1993,36(6):1525-1531.
[11] ARAYA K.Optimization of the design of subsoiling and pressurized fluid injection equipment[J].Journal of Agricultural Engineering Research,1994,57(1):39-52.
[12] VEPRASKAS M J,MINER G S.Effects of subsoiling and mechanical impedance on tobacco root growth[J].Soil Science Society of America Journal,1986,50(2):423-427.
[13] BROWN S M,WHITWELL J T,TOUCHTON J T,et al.Conservation tillage systems for cotton production[J].Soil Science Society of America Journal,1985,49(5):1256-1259.
[14] 罗锡文,邵耀坚,邱国庆,等.土壤深松技术在甘蔗生产中的应用[J].农业机械学报,1997,28(1):39-42.
[15] 曾德超.机械土壤动力学[M].北京:北京科学技术出版社,1995.
[16] TROUSSE A C,HUMBERT R P.Deep tillage in Hawaii:1.Subsoiling[J].Soil Science,1959,88(3):15.
[17] SPOOR G,GODWIN R J.An experimental investigation into the deep loosening of soil by rigid tines[J].Journal of Agricultural Engineering Research,1978,23(3):243-258.
[18] GODWIN R J,SPOOR G,SOOMRO M S.The effect of tine arrangement on soil forces and disturbance[J].Journal of Agricultural Engineering Research,1984,30(1):47-56.
[19] HARRISON H P.Soil reacting forces for a bentleg plow[J].Transactions of the ASAE,1988,31(1):47-51.
[20] HARRISON H P,LICSKO J Z.Soil reacting wrenches and dynamics for three models of bentleg plows[J].Transactions of the ASAE,1989,32(1):50-53.
[21] HARRISON H P.Soil reacting forces for two,tapered bentleg plows[J].Transactions of the ASAE,1990,33(5):1473-1476.
[22] 陈明,谷谒白,刘向阳.全方位深松部件结构参数的试验研究[J].北京农业工程大学学报,1995,15(1):24-30.
[23] SAKAI K,HATA S I,TAKAI M,et al.Design parameters of four-shank vibrating subsoiler[J].Transactions of the ASAE,1993,36(1):23-26.
[24] BANDALAN E P,SALOKHE V M,GUPTA C P,et al.Performance of an oscillating subsoiler in breaking a hardpan[J].Journal of Terramechanics,1999,36(1):117-125.
[25] SHINNER K J,ALCOCK R,WILKES J M.Combining active and passive requirement[J].Transactions of the ASAE,1990,33(2):400-404.
[26] WEISE G.Active and passive elements of a combined tillage machine:interation,draught requirement and energy consumption[J].Journal of Agricultural Engineering Research,1993,56(4):287-299.
[27] MACKSON C J.The effect of electro-osmosis on soil to steel sliding friction as influenced by speed,voltage and soil moisture[A].ASAE Paper[C],1962,No.62-650.
[28] 乔维高,蒋崇贤.滑板电渗减阻机理及试验研究[J].农业机械学报,1994,25(4):71-75.
[29] HENDRICK J G,BUCHELE W E.Tillage energy of a vibrating tillage tool[J].Transactions of the ASAE,1963,6(3):213-216.
[30] LARSON L W.The future of vibratory tillage[J].Transactions of the ASAE,1967,10(1):78-79,83.
[31] SMITH J L,DAIS J L,FLIKKE A M.Theoretical analysis of vibratory tillage[J].Transactions of the ASAE,1972,15(5):831-833.
[32] 邱立春,李宝筏.自激振动深松机减阻试验研究[J].农业工程学报,2000,16(6):72-75.
[33] GUNN J T,TRAMONTINI V N.Oscillations of tillage implements[J].Agricultural Engineering,1995,36(11):725-729.
[34] 韩国政,张鹰.磁性犁耕阻力试验研究[J].农业机械学报,1991,22(3):45-48.
[35] 朱恒福,谈黎虹,吴士澌.彗星式通孔减阻犁的试验研究[J].农业机械学报,1992,23(4):20-24.
[36] TONG Jin,GUO Zhi-jun,REN Lu-quan,et al.Structures of three soil-burrowing animal claws and their potential applications[J].International Agricultural Engineering Journal(in press).
[37] REN Lu-quan,TONG Jin,LI Jian-qiao,et al.Soil adhesion and biomimetics of soil-engaging components in anti-adhesion against soil:a review[J].Journal of Agricultural Engineering Research,2001,79(3):239-263.
[1] 熙鹏,丛茜,王庆波,郭华曦. 仿生条纹形磨辊磨损试验及耐磨机理分析[J]. 吉林大学学报(工学版), 2018, 48(6): 1787-1792.
[2] 郭昊添,徐涛,梁逍,于征磊,刘欢,马龙. 仿鲨鳃扰流结构的过渡段换热表面优化设计[J]. 吉林大学学报(工学版), 2018, 48(6): 1793-1798.
[3] 贾洪雷, 王万鹏, 陈志, 庄健, 王文君, 刘慧力. 基于土壤坚实度的仿形弹性镇压辊镇压力实时测量方法[J]. 吉林大学学报(工学版), 2018, 48(4): 1169-1175.
[4] 田为军, 王骥月, 李明, 张兴旺, 张勇, 丛茜. 面向水上机器人的水黾运动观测[J]. 吉林大学学报(工学版), 2018, 48(3): 812-820.
[5] 李因武, 吴庆文, 常志勇, 杨成. 基于仿生斗齿的反铲液压挖掘机动臂仿真优化设计[J]. 吉林大学学报(工学版), 2018, 48(3): 821-827.
[6] 钱志辉, 周亮, 任雷, 任露泉. 具有仿生距下关节和跖趾关节的完全被动步行机[J]. 吉林大学学报(工学版), 2018, 48(1): 205-211.
[7] 田丽梅, 王养俊, 李子源, 商延赓. 仿生功能表面内流减阻测试系统的研制[J]. 吉林大学学报(工学版), 2017, 47(4): 1179-1184.
[8] 陈东辉, 刘伟, 吕建华, 常志勇, 吴婷, 慕海锋. 基于虾夷扇贝体表结构的玉米茬根捡拾器仿生设计[J]. 吉林大学学报(工学版), 2017, 47(4): 1185-1193.
[9] 黄晗, 李建桥, 陈百超, 吴宝广, 邹猛. 着陆器足垫冲击特性模型试验[J]. 吉林大学学报(工学版), 2017, 47(4): 1194-1200.
[10] 王颖, 李建桥, 张广权, 黄晗, 邹猛. 基于多种介质的仿生步行足力学特性[J]. 吉林大学学报(工学版), 2017, 47(2): 546-551.
[11] 葛长江, 叶辉, 胡兴军, 于征磊. 鸮翼后缘噪声的预测及控制[J]. 吉林大学学报(工学版), 2016, 46(6): 1981-1986.
[12] 李梦, 苏义脑, 孙友宏, 高科. 高胎体仿生异型齿孕镶金刚石钻头[J]. 吉林大学学报(工学版), 2016, 46(5): 1540-1545.
[13] 梁云虹, 任露泉. 自然生境及其仿生学初探[J]. 吉林大学学报(工学版), 2016, 46(5): 1746-1756.
[14] 梁云虹, 任露泉. 人类生活及其仿生学初探[J]. 吉林大学学报(工学版), 2016, 46(4): 1373-1384.
[15] 齐龙, 梁仲维, 蒋郁, 马旭, 武涛, 芦玉龙, 赵柳霖. 轻型水田除草机的设计及试验[J]. 吉林大学学报(工学版), 2016, 46(3): 1004-1012.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!