吉林大学学报(工学版)

• • 上一篇    下一篇

车辆振动信号的特征提取方法比较

廖庆斌1,李舜酩1,覃小攀2   

  1. 1.南京航空航天大学 能源与动力学院,南京 210016; 2.吉林大学 汽车工程学院,长春 130022
  • 收稿日期:2006-06-22 修回日期:2006-08-29 出版日期:2007-07-01 发布日期:2007-07-01
  • 通讯作者: 李舜酩

Comparison of feature extraction methods of vehicle vibration signal

Liao Qing-bin1, Li Shun-ming1, Qin Xiao-pan2   

  1. 1.College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China; 2.College of Automotive Engineering, Jilin University, Changchun 130022, China
  • Received:2006-06-22 Revised:2006-08-29 Online:2007-07-01 Published:2007-07-01
  • Contact: Li Shun-ming

摘要: 针对用于车辆振动信号分析的常用方法:小波分析方法和Hilbert-Huang变换方法,以及作者新近提出的时序多相关经验模式分解方法,通过仿真对比分析了它们各自的特点以及它们在振动信号特征提取中的适用性。非线性信号的仿真分析表明,在没有噪声或分析对象背景噪声较小的情况下,后两种方法能提取到特征信号,小波分析不适合非线性信号的分析;在强背景噪声下,前两种方法均不能得到满意的特征信息,而时序多相关-经验模式分解方法能提取到所需的目标信息。最后将时序多相关-经验模式分解方法用于某特种车辆特征信号的提取,得到了满意的结果,验证了该方法在车辆振动信号特征提取中的有效性。

关键词: 信息处理技术, 振动信号, 特征提取, 小波分析, Hilbert-Huang变换, 时间序列多相关, 经验模式分解

Abstract: The vibration signals of a vehicle always carry the dynamic information of the vehicle. These signals are very useful for the health monitoring and fault diagnosis. However, in many cases, because these signals have very low signal-to-noise ratio (SNR), to extract feature components becomes difficult and the applicability of information drops down. The characters of feature extraction of vibration signal were compared, among the two popular methods named wavelet analysis (WA) and Hilbert-Huang translation (HHT) and the multicorrelation of time series and empirical mode decomposition (MCTS-EMD), via simulation. And the applicability of them was analyzed using the simulation signal. The HHT and MCTS-EMD can extract the feature signal in no interference of noise or the SNR is a large number, while the WA is not suit for the feature extraction of nonlinear signal. In the strong background noise, the WA and HHT can not work well, contrasting them; the MCTS-EMD can extract the wanted object information. At last, The MCTS-EMD method was used to extract the feature signal of some special vehicle, a satisfactory result can be get, this validity of MCTSEMD was validated in the feature extraction of vehicle vibration signal.

Key words: information processing, vibration signal, feature extraction, wavelet analysis, Hilbert-Huang translation, multi-correlation of time series, empirical mode decomposition

中图分类号: 

  • TN911
[1] 苏寒松,代志涛,刘高华,张倩芳. 结合吸收Markov链和流行排序的显著性区域检测[J]. 吉林大学学报(工学版), 2018, 48(6): 1887-1894.
[2] 徐岩,孙美双. 基于卷积神经网络的水下图像增强方法[J]. 吉林大学学报(工学版), 2018, 48(6): 1895-1903.
[3] 李居朋,张祖成,李墨羽,缪德芳. 基于Kalman滤波的电容屏触控轨迹平滑算法[J]. 吉林大学学报(工学版), 2018, 48(6): 1910-1916.
[4] 黄勇,杨德运,乔赛,慕振国. 高分辨合成孔径雷达图像的耦合传统恒虚警目标检测[J]. 吉林大学学报(工学版), 2018, 48(6): 1904-1909.
[5] 应欢,刘松华,唐博文,韩丽芳,周亮. 基于自适应释放策略的低开销确定性重放方法[J]. 吉林大学学报(工学版), 2018, 48(6): 1917-1924.
[6] 陆智俊,钟超,吴敬玉. 星载合成孔径雷达图像小特征的准确分割方法[J]. 吉林大学学报(工学版), 2018, 48(6): 1925-1930.
[7] 刘仲民,王阳,李战明,胡文瑾. 基于简单线性迭代聚类和快速最近邻区域合并的图像分割算法[J]. 吉林大学学报(工学版), 2018, 48(6): 1931-1937.
[8] 单泽彪,刘小松,史红伟,王春阳,石要武. 动态压缩感知波达方向跟踪算法[J]. 吉林大学学报(工学版), 2018, 48(6): 1938-1944.
[9] 姚海洋, 王海燕, 张之琛, 申晓红. 双Duffing振子逆向联合信号检测模型[J]. 吉林大学学报(工学版), 2018, 48(4): 1282-1290.
[10] 全薇, 郝晓明, 孙雅东, 柏葆华, 王禹亭. 基于实际眼结构的个性化投影式头盔物镜研制[J]. 吉林大学学报(工学版), 2018, 48(4): 1291-1297.
[11] 陈涛, 崔岳寒, 郭立民. 适用于单快拍的多重信号分类改进算法[J]. 吉林大学学报(工学版), 2018, 48(3): 952-956.
[12] 耿庆田, 于繁华, 王宇婷, 高琦坤. 基于特征融合的车型检测新算法[J]. 吉林大学学报(工学版), 2018, 48(3): 929-935.
[13] 陈绵书, 苏越, 桑爱军, 李培鹏. 基于空间矢量模型的图像分类方法[J]. 吉林大学学报(工学版), 2018, 48(3): 943-951.
[14] 孟广伟, 李荣佳, 王欣, 周立明, 顾帅. 压电双材料界面裂纹的强度因子分析[J]. 吉林大学学报(工学版), 2018, 48(2): 500-506.
[15] 林金花, 王延杰, 孙宏海. 改进的自适应特征细分方法及其对Catmull-Clark曲面的实时绘制[J]. 吉林大学学报(工学版), 2018, 48(2): 625-632.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!