吉林大学学报(工学版)

• • 上一篇    下一篇

进气温度对甲醇均质压燃燃烧特性的影响

韩立伟,洪伟,张纪鹏,郭英男,常国锋   

  1. 吉林大学 汽车工程学院,长春 130022
  • 收稿日期:2007-09-26 修回日期:2007-12-29 出版日期:2009-01-01 发布日期:2009-01-01
  • 通讯作者: 洪伟

Influence of charge temperature on methanol homogeneous charge
compression ignition combustion characteristics

HAN Li-wei,HONG Wei,ZHANG Ji-peng,GUO Ying-nan,CHANG Guo-feng   

  1. College of Automotive Engineering,Jilin University,Changchun 130022,China
  • Received:2007-09-26 Revised:2007-12-29 Online:2009-01-01 Published:2009-01-01
  • Contact: HONG Wei

摘要: 在一台快速压缩机上模拟甲醇HCCI的燃烧过程,通过缸压曲线和活塞位移曲线等数据进行计算分析,研究了进气温度对甲醇均质压燃燃烧特性的影响规律。结果表明,当其他边界条件一定时,随着甲醇混合气进气温度的增加,甲醇HCCI的燃烧始点提前,缸内压力升高率峰值增加,放热率峰值增加,燃烧持续期缩短。

关键词: 动力机械工程, 甲醇, 均质充气压缩点燃, 燃烧特性, 进气温度, 快速压缩机

Abstract: With the emerging of the alternative fuel and the new combustion mode of the internal combustion engine, it is necessary to study its combustion mechanism and characteristics. The process of methanol homogeneous charge compression ignition(HCCI) combustion was simulated experimentally using a rapid compression machine(RCM). The influence of the intake charge temperature on methanol HCCI combustion characteristics was investigated by analyzing the histories of the incylinder pressure and the piston displacement in the RCM. The results show that with the increase of the charge temperature, the ignition of methanol occurs earlier and earlier, the pressure rise rate and the peak heat release rate increase, and the combustion duration decreases correspondingly.

Key words: power and machinery engineering, methanol, homogeneous charge compression ignition (HCCI), combustion characteristics, intake temperature, rapid compression machine(RCM)

[1] 董伟,宋佰达,邱立涛,孙昊天,孙平,蒲超杰. 直喷汽油机暖机过程中两次喷射比例对燃烧和排放的影响[J]. 吉林大学学报(工学版), 2018, 48(6): 1755-1761.
[2] 林学东, 江涛, 许涛, 李德刚, 郭亮. 高压共轨柴油机起动工况高压泵控制策略[J]. 吉林大学学报(工学版), 2018, 48(5): 1436-1443.
[3] 李志军, 汪昊, 何丽, 曹丽娟, 张玉池, 赵新顺. 催化型微粒捕集器碳烟分布及其影响因素[J]. 吉林大学学报(工学版), 2018, 48(5): 1466-1474.
[4] 秦静, 徐鹤, 裴毅强, 左子农, 卢莉莉. 初始温度和初始压力对甲烷-甲醇裂解气预混层流燃烧特性的影响[J]. 吉林大学学报(工学版), 2018, 48(5): 1475-1482.
[5] 宫洵, 蒋冰晶, 胡云峰, 曲婷, 陈虹. 柴油机主-从双微元Urea-SCR系统非线性状态观测器设计与分析[J]. 吉林大学学报(工学版), 2018, 48(4): 1055-1062.
[6] 钟兵, 洪伟, 金兆辉, 苏岩, 解方喜, 张富伟. 进气门早关液压可变气门机构运动特性[J]. 吉林大学学报(工学版), 2018, 48(3): 727-734.
[7] 江涛, 林学东, 李德刚, 顾静静. 压缩天然气缸内直喷发动机喷射方式对混合气形成及燃烧特性影响的模拟[J]. 吉林大学学报(工学版), 2018, 48(3): 735-743.
[8] 席雷, 徐亮, 高建民, 赵振, 王明森. 厚壁矩形带肋通道内蒸汽流动及传热特性[J]. 吉林大学学报(工学版), 2018, 48(3): 752-759.
[9] 李龙, 张幽彤, 左正兴. 变负载控制在自由活塞内燃发电机的缸压控制中的应用[J]. 吉林大学学报(工学版), 2018, 48(2): 473-479.
[10] 田径, 刘忠长, 刘金山, 董春晓, 钟铭, 杜文畅. 基于燃烧边界参数响应曲面设计的柴油机性能优化[J]. 吉林大学学报(工学版), 2018, 48(1): 159-165.
[11] 卫海桥, 裴自刚, 冯登全, 潘家营, 潘明章. 压电喷油器多次喷射对GDI汽油机颗粒物排放的影响[J]. 吉林大学学报(工学版), 2018, 48(1): 166-173.
[12] 李志军, 何丽, 姜瑞, 申博玺, 孔祥金, 刘世宇. 柴油机微粒捕集器灰分分布对其压降的影响评价[J]. 吉林大学学报(工学版), 2017, 47(6): 1760-1766.
[13] 郭亮, 杨文昭, 王云开, 孙万臣, 程鹏, 李国良. 废气再循环对丁醇/柴油混合燃料发动机的影响[J]. 吉林大学学报(工学版), 2017, 47(6): 1767-1774.
[14] 虞浏, 刘忠长, 刘江唯, 杜宏飞, 许允. 直喷汽油机喷雾粒径特性[J]. 吉林大学学报(工学版), 2017, 47(5): 1482-1488.
[15] 刘忠长, 腾鹏坤, 田径, 许允, 亓升林, 于凯波. 二级增压柴油机旁通阀调节特性[J]. 吉林大学学报(工学版), 2017, 47(3): 796-803.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!