吉林大学学报(工学版) ›› 2011, Vol. 41 ›› Issue (05): 1326-1330.

• 论文 • 上一篇    下一篇

液驱混合动力车辆优化结构的脉动特性

陈延礼,刘顺安,尚涛   

  1. 吉林大学 机械科学与工程学院,长春130022
  • 收稿日期:2010-05-15 出版日期:2011-09-01 发布日期:2011-09-01
  • 通讯作者: 尚涛(1968-),男,副教授.研究方向:液压机械无级传动. E-mail:shangtao@jlu.edu.cn
  • 作者简介:陈延礼(1983-),男,博士研究生.研究方向:流体传动与控制,流体有限元理论.E-mail:chenyanli-2008@163.com
  • 基金资助:

    国家自然科学基金项目(50475011) ;吉林大学“985”工程项目(450022102002).

Pulsating characteristic of optimal structure of hydraulic hybrid vehicle

CHEN Yan-li, LIU Shun-an, SHANG Tao   

  1. College of Mechanical Science and Engineering, Jilin University, Changchun 130022, China
  • Received:2010-05-15 Online:2011-09-01 Published:2011-09-01

摘要:

根据蓄能器优化条件阐述了液驱混合动力车辆的优化结构及其工作原理。建立了液压变压器瞬时流量的数学模型,用频率法进行了并联、串联式蓄能器的理论分析。当配流盘控制角不同时,对液压变压器各个腰型槽口的瞬时流量以及蓄能器的流量响应情况进行了仿真分析。结果表明,无论配流盘控制角是否为零,串联式蓄能器的脉动衰减作用优于并联式蓄能器。

关键词: 车辆工程, 流体传动与控制, 液压变压器, 蓄能器, 脉动分析

Abstract:

The optimal structure of the hydraulic hybrid vehicle and its working principle were presented based on the optimization conditions of the accumulator. A mathematical model was built for the instantaneous flow rate of the hydraulic transformer(HT) and the theoretical analyses of the series and parallel accumulator were made with the frequency method. The instantaneous flow rate through the kidney form port of the HT and the flow rate response of the accumulator were numerically simulated under different control angle of the port plate. The results show that the damping effect of the series accumulator to the flow pulsation of the HT is superior to that of the parallel accumulator, regardless of the control angle of the port plate is zero or not.

Key words: vehicle engineering, fluid power transmission and control, hydraulic transformer, accumulator, pulsation analysis

中图分类号: 

  • TH137
[1] 常成,宋传学,张雅歌,邵玉龙,周放. 双馈电机驱动电动汽车变频器容量最小化[J]. 吉林大学学报(工学版), 2018, 48(6): 1629-1635.
[2] 席利贺,张欣,孙传扬,王泽兴,姜涛. 增程式电动汽车自适应能量管理策略[J]. 吉林大学学报(工学版), 2018, 48(6): 1636-1644.
[3] 何仁,杨柳,胡东海. 冷藏运输车太阳能辅助供电制冷系统设计及分析[J]. 吉林大学学报(工学版), 2018, 48(6): 1645-1652.
[4] 那景新,慕文龙,范以撒,谭伟,杨佳宙. 车身钢-铝粘接接头湿热老化性能[J]. 吉林大学学报(工学版), 2018, 48(6): 1653-1660.
[5] 刘玉梅,刘丽,曹晓宁,熊明烨,庄娇娇. 转向架动态模拟试验台避撞模型的构建[J]. 吉林大学学报(工学版), 2018, 48(6): 1661-1668.
[6] 赵伟强, 高恪, 王文彬. 基于电液耦合转向系统的商用车防失稳控制[J]. 吉林大学学报(工学版), 2018, 48(5): 1305-1312.
[7] 宋大凤, 吴西涛, 曾小华, 杨南南, 李文远. 基于理论油耗模型的轻混重卡全生命周期成本分析[J]. 吉林大学学报(工学版), 2018, 48(5): 1313-1323.
[8] 朱剑峰, 张君媛, 陈潇凯, 洪光辉, 宋正超, 曹杰. 基于座椅拉拽安全性能的车身结构改进设计[J]. 吉林大学学报(工学版), 2018, 48(5): 1324-1330.
[9] 那景新, 浦磊鑫, 范以撒, 沈传亮. 湿热环境对Sikaflex-265铝合金粘接接头失效强度的影响[J]. 吉林大学学报(工学版), 2018, 48(5): 1331-1338.
[10] 王炎, 高青, 王国华, 张天时, 苑盟. 混流集成式电池组热管理温均特性增效仿真[J]. 吉林大学学报(工学版), 2018, 48(5): 1339-1348.
[11] 金立生, 谢宪毅, 高琳琳, 郭柏苍. 基于二次规划的分布式电动汽车稳定性控制[J]. 吉林大学学报(工学版), 2018, 48(5): 1349-1359.
[12] 隗海林, 包翠竹, 李洪雪, 李明达. 基于最小二乘支持向量机的怠速时间预测[J]. 吉林大学学报(工学版), 2018, 48(5): 1360-1365.
[13] 姜继海, 葛泽华, 杨晨, 梁海健. 基于微分器的直驱电液伺服系统离散滑模控制[J]. 吉林大学学报(工学版), 2018, 48(5): 1492-1499.
[14] 刘建芳, 王记波, 刘国君, 李新波, 梁实海, 杨志刚. 基于PMMA内嵌三维流道的压电驱动微混合器[J]. 吉林大学学报(工学版), 2018, 48(5): 1500-1507.
[15] 王德军, 魏薇郦, 鲍亚新. 考虑侧风干扰的电子稳定控制系统执行器故障诊断[J]. 吉林大学学报(工学版), 2018, 48(5): 1548-1555.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!