吉林大学学报(工学版) ›› 2014, Vol. 44 ›› Issue (6): 1716-1722.doi: 10.13229/j.cnki.jdxbgxb201406028

• • 上一篇    下一篇

高强度热成形钢板冷却速率-强度-硬度预测

盈亮1, 2, 戴明华1, 2, 胡平1, 2, 范正帅2, 申国哲2, 史栋勇3   

  1. 1.大连理工大学 工业装备与结构分析国家重点实验室,辽宁 大连 116024;
    2.大连理工大学 汽车工程学院,辽宁 大连 116024;
    3.大连理工大学 工程力学系,辽宁 大连 116024
  • 收稿日期:2013-07-22 出版日期:2014-11-01 发布日期:2014-11-01
  • 通讯作者: 胡平(1956-),男,教授,博士生导师.研究方向:汽车车身工程.E-mail:pinghu@dlut.edu.cn
  • 作者简介:盈亮(1983-),男,讲师,博士.研究方向:高强度钢板热成形制造工艺及数值模拟.E-mail:
  • 基金资助:
    国家自然科学基金重点项目(10932003,11272075); “973”国家重点基础研究发展计划项目(2010CB832700); 国家工信部04重大专项项目(2011ZX04001-021); 中央高校基本科研业务费专项资金项目(DUT14RC(3)032)

Strength and hardness prediction based on cooling rate for hot forming high strength steel

YING Liang1, 2, DAI Ming-hua1, 2, HU Ping1, 2, FAN Zheng-shuai2, SHEN Guo-zhe2, SHI Dong-yong3   

  1. 1.State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian 116024, China;
    2.School of Automotive Engineering, Dalian University of Technology, Dalian 116024, China;
    3.Department of Engineering Mechanics, Dalian University of Technology, Dalian 116024, China
  • Received:2013-07-22 Online:2014-11-01 Published:2014-11-01

RICH HTML

0   

PDF (PC)

422

摘要： 基于高强度钢板热成形平板模具分区冷却试验获得了淬火过程阶段冷却速度对机械强度-硬度的影响规律。采用量纲分析法建立了热成形材料冷却速率-机械强度-硬度指数模型,并验证了该模型的有效性。通过编制用户子程序将该模型引入自主开发的KMAS_HF软件平台中,实现了对典型U形热成形产品淬火后强度硬度的数值仿真预测。结果表明:该模型对热成形高强度钢淬火后机械性能仿真预测具有较好的适用性,为实现梯度硬度复合热成形工艺优化及产品性能分析提供了一种新的仿真分析流程。

关键词: 金属材料, 分区冷却, 强度-硬度指数模型, 量纲反推法, 数值仿真

Abstract: This paper investigates the effect of partitioned cooling on the mechanical strength and hardness of hot forming steel based on the flat tool cooling test. An exponential model of the mechanical strength-hardness-cooling rate was established using the dimensional analysis method, and this model was validated to be effective. By writing the user subroutine, this model was introduced into the prediction program in the self-developed software KMAS_HF platform to validate the hardness and strength prediction of U-shape hot forming product. Results show that the model is reliable and applicable in predicting the mechanical properties of hot forming products, which can be used to guide the optimization of hot forming process and the design of hot forming tools.

Key words: metal material, divided stage cooling, strength-hardness exponential model, dimension inverse method, numerical prediction

中图分类号: 

  • TG376.2
[1] Karbasian H, Tekkaya A E. A review on hot stamping[J]. Journal of Materials Processing Technology, 2010,210(15):2103-2118.
[2] 朱敏,姬琳,叶辉. 考虑侧碰的汽车B柱加强板材料性能梯度优化[J]. 吉林大学学报:工学版,2011,41(5):1210-1215. Zhu Min, Ji Lin,Ye Hui. Optimization of yield stress distribution on in B pillar reinforcement panel regarding side crash worthines[J]. Journal of Jilin University (Engineering and Technology Edition), 2011,41(5): 1210-1215.
[3] Naderi M, Ketabchi M, Abbasi M, et al. Semi-hot stamping as an improved process of hot stamping[J]. Journal of Materials Science & Technology,2011,27(4):369-376.
[4] Mun D J, Shin E J, Choi Y W, et al. Effects of cooling rate, austenitizing temperature and austenite deformation on the transformation behavior of high-strength boron steel[J]. Materials Science and Engineering A,2012,545: 214-224.
[5] Cui Jun-jia, Lei Cheng-xi, Xing Zhong-wen, et al. Microstructure distribution and mechanical properties prediction of boron alloy during hot forming using FE simulation[J] Materials Science and Engineering A, 2012,535:241-251.
[6] Li M V, Niebuhr D V, Meekisho L L, et al. A computational model for the prediction of steel hardenability[J]. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science,1998,29(3):661-672.
[7] Bok H H, Lee M G, Pavlina E J, et al. Comparative study of the prediction of microstructure and mechanical properties for a hot-stamped B-pillar reinforcing part[J]. International Journal of Mechanical Sciences, 2011,53(9):744-752.
[8] Bardelcik A, Salisbury C P, Winkler S,et al. Effect of cooling rate on the high strain rate properties of boron steel[J]. International Journal of Impact Engineering, 2010,37(6):694-702.
[9] Nishibata T, Kojima N. Effect of quenching rate on hardness and microstructure of hot-stamped steel[J]. Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan,2010,96(6):378-385.
[10] Naderi M, Saeed-Akbari A, Bleck W. The effects of non-isothermal deformation on martensitic transformation in 22MnB5 steel[J]. Materials Science and Engineering A,2008,487(1-2):445-455.
[11] 谈庆明. 量纲分析[M]. 合肥:中国科学技术大学出版社,2005.
[12] Bhaskar R, Nigam A. Qualitative physics using dimensional analysis[J]. Artificial Intelligence, 1990, 45(1-2):73-111.
[13] 马增胜. 纳米压痕法表征金属薄膜材料的力学性能[D]. 湘潭:湘潭大学材料与光电物理学院,2011. Ma Zeng-sheng. Characterization of the mechanical properties of metallic films by nanoindentation method[D]. Xiangtan: Faculty of Materials,Optoelectronics and Physics, Xiangtan University, 2011.
[14] Hora P, Roll K, Volk W,et al. Nunmisheet 2008[DB/OL].[2013-02-05]. http://wenku.baidu.com/link?url=SbLuE5QWYXt6ggJXIRGT-XIGY3y1XlZCwS0VpxFt_KIVLrTFTRQ2knmpZwcf79Tm_lyOsShgfzJRCs4VFhZKQRbhbn-2-p0TdnP44AqS2kC.
[15] Turetta A, Bruschi S, Ghiotti A. Investigation of 22MnB5 formability in hot stamping operations[J]. Journal of Materials Processing Technology,2006,177(1-3): 396-400.
[1] 关庆丰,张福涛,彭韬,吕鹏,李姚君,许亮,丁佐军. 含硼、钴9%Cr耐热钢的热变形行为[J]. 吉林大学学报(工学版), 2018, 48(6): 1799-1805.
[2] 仇艳凯, 李宝仁, 杨钢, 曹博, 刘真. 新型液压消声器吸收液压系统压力脉动的机理和特性[J]. 吉林大学学报(工学版), 2018, 48(4): 1085-1091.
[3] 关庆丰, 董书恒, 郑欢欢, 李晨, 张从林, 吕鹏. 强流脉冲电子束作用下45#钢表面Cr合金化[J]. 吉林大学学报(工学版), 2018, 48(4): 1161-1168.
[4] 赵宇光, 杨雪慧, 徐晓峰, 张阳阳, 宁玉恒. Al-10Sr变质剂状态、变质温度及变质时间对ZL114A合金组织的影响[J]. 吉林大学学报(工学版), 2018, 48(1): 212-220.
[5] 汤华国, 马贤锋, 赵伟, 刘建伟, 赵振业. 高性能金属铝的制备、微观结构及其热稳定性[J]. 吉林大学学报(工学版), 2017, 47(5): 1542-1547.
[6] 王国林, 沈飞, 周海超, 杨建. 轮胎花纹泵浦噪声评价方法及降噪结构设计[J]. 吉林大学学报(工学版), 2017, 47(4): 1024-1031.
[7] 关庆丰, 张远望, 孙潇, 张超仁, 吕鹏, 张从林. 强流脉冲电子束作用下铝钨合金的表面合金化[J]. 吉林大学学报(工学版), 2017, 47(4): 1171-1178.
[8] 杨晓红, 杭文先, 秦绍刚, 刘勇兵, 刘利萍. H13钢激光熔覆钴基复合涂层的组织及耐磨性[J]. 吉林大学学报(工学版), 2017, 47(3): 891-899.
[9] 关庆丰, 黄尉, 李怀福, 龚晓花, 张从林, 吕鹏. 强流脉冲电子束诱发的Cu-C扩散合金化[J]. 吉林大学学报(工学版), 2016, 46(6): 1967-1973.
[10] 张学广, 刘纯国, 郑愿, 江仲海, 李湘吉. 基于延性损伤和剪切损伤的铝合金成形极限预测[J]. 吉林大学学报(工学版), 2016, 46(5): 1558-1566.
[11] 刘晓波, 周德坤, 赵宇光. 不同等温热处理条件下半固态挤压Mg2Si/Al复合材料的组织和性能[J]. 吉林大学学报(工学版), 2016, 46(5): 1577-1582.
[12] 胡平, 张金女, 申国哲, 林发财, 刘立忠. 应力状态对模具分区冷却热成形S-rail硬度分布的影响[J]. 吉林大学学报(工学版), 2016, 46(2): 500-504.
[13] 李春玲, 樊丁, 王斌, 余淑荣. 5A06铝合金/镀锌钢预置涂粉对接激光熔钎焊组织与性能[J]. 吉林大学学报(工学版), 2016, 46(2): 516-521.
[14] 张家陶, 赵宇光, 谭娟. 初始组织对电脉冲处理逆变奥氏体晶粒细化效果的影响[J]. 吉林大学学报(工学版), 2016, 46(1): 193-198.
[15] 张志强， 贾晓飞， 袁秋菊. 基于Yoshida-Uemori模型的TRIP800高强钢回弹分析[J]. 吉林大学学报(工学版), 2015, 45(6): 1852-1856.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
版权所有 © 《吉林大学学报(工学版)》编辑部
地址：长春市人民大街5988号　电话：+86-431-85095297　传真：+86-431-85094074　E-mail: xbgxb@jlu.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发