吉林大学学报(工学版) ›› 2016, Vol. 46 ›› Issue (1): 21-27.doi: 10.13229/j.cnki.jdxbgxb201601004

Previous Articles     Next Articles

Mode-switch control scheme for hybrid electric vehicle

BA Te1, GAO Yin-han1, ZENG Xiao-hua1, PENG Yu-jun2, SONG Da-feng1, ZHU Qing-lin3, BAI Ge2, WANG Qing-nian1   

  1. 1.State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun 130022, China;
    2.College of Automotive Engineering, Jilin University, Changchun 130022,China; 3.Qiming Information Technology Co., Ltd, Changchun 130011,China
  • Received:2013-10-28 Online:2016-01-30 Published:2016-01-30

RICH HTML

0   

PDF (PC)

412

Abstract:

In order to solve the issue of frequent mode-switch of hybrid electric vehicle, a new scheme is proposed. The scheme integrates the time based, filter based and fuzzy logical and hysteresis based methods. Simulation results show that adopting the proposed scheme the percentage of mode duration less than 4 s is reduced from 85% to 3%, which mean that the number of mode switching falls nearly 80%. Meanwhile, the actual vehicle velocity follows the desired velocity and the charge maintains within a narrow operating band as well. The maximum and average impact equivalent degrees are reduced by 42% and 61.4%, and the fuel economy of the vehicle is improved by 9.4%.

Key words: vehicle engineering, vehicle ride comfort, mode-switch, fuzzy logic, hysteresis

CLC Number: 

  • U469.7
[1] Hawkins T R, Gausen O M, Strϕmman A H. Environmental impacts of hybrid and electric vehicles—a review[J]. International Journal of Life Cycle Assessment, 2012, 17(8): 997-1014.
[2] Bayindir K Ç, Gözüküçük M A, Teke A. A comprehensive overview of hybrid electric vehicle: powertrain configurations, powertrain control techniques and electronic control units[J]. Energy Conversion and Management, 2011, 52(2): 1305-1313.
[3] Salmasi F R. Control strategies for hybrid electric vehicles: evolution, classification, comparison, and future trends[J]. IEEE Transactions on Vehicular Technology, 2007, 56(5): 2393-2404.
[4] Wirasingha S G, Emadi A. Classification and review of control strategies for plug-in hybrid electric vehicles[J]. IEEE Transactions on Vehicular Technology, 2011, 60(1): 111-122.
[5] Chau K T, Wong Y S. Overview of power management in hybrid electric vehicles[J]. Energy Conversion and Management, 2002, 43(15): 1953-1968.
[6] Mansour C, Clodic D. Optimized energy management control for the Toyota hybrid system using dynamic programming on a predicted route with short computation time[J]. International Journal of Automotive Technology, 2012,13(2): 309-324.
[7] Minh V T, Rashid A A. Modeling and model predictive control for hybrid electric vehicles[J]. International Journal of Automotive Technology, 2012, 13(3): 477-485.
[8] Koprubasi K, Westervelt E R, Rizzoni G. Toward the systematic design of controllers for smooth hybrid electric vehicle mode changes[C]∥American Control Conference, New Tork, IEEE, 2007: 2985-2990.
[9] 王庆年, 冀尔聪, 王伟华. 并联混合动力汽车模式切换过程的协调控制[J]. 吉林大学学报:工学版, 2008, 38(1): 1-6.
Wang Qing-nian, Ji Er-cong, Wang Wei-hua. Coordinated control for mode-switch of parallel hybrid electric vehicle[J]. Journal of Jilin University (Engineering and Technology Edition), 2008, 38(1): 1-6.
[10] 赵治国, 何宁, 朱阳, 等. 四轮驱动混合动力轿车驱动模式切换控制[J]. 机械工程学报, 2011, 47(4): 100-109.
Zhao Zhi-guo, He Ning, Zhu Yang, et al. Mode transition control for four wheel drive hybrid electric car[J]. Journal of Mechanical Engineering, 2011, 47(4): 100-109.
[11] 杜波, 秦大同, 段志辉, 等. 新型并联式混合动力汽车模式切换协调控制[J]. 中国机械工程, 2012, 23(6): 739-744.
Du Bo, Qin Da-tong, Duan Zhi-hui, et al. Coordinated control for mode-switch of a new paralle HEV[J].Chinese Journal of Mechanical Engineering, 2012, 23(6): 739-744.
[1] CHANG Cheng,SONG Chuan-xue,ZHANG Ya-ge,SHAO Yu-long,ZHOU Fang. Minimizing inverter capacity of doubly-fed machine driving electric vehicles [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1629-1635.
[2] XI Li-he,ZHANG Xin,SUN Chuan-yang,WANG Ze-xing,JIANG Tao. Adaptive energy management strategy for extended range electric vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1636-1644.
[3] HE Ren,YANG Liu,HU Dong-hai. Design and analysis of refrigeration system supplied by solar auxiliary power of refrigerator car [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1645-1652.
[4] NA Jing-xin,MU Wen-long,FAN Yi-sa,TAN Wei,YANG Jia-zhou. Effect of hygrothermal aging on steel-aluminum adhesive joints for automotive applications [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1653-1660.
[5] LIU Yu-mei,LIU Li,CAO Xiao-ning,XIONG Ming-ye,ZHUANG Jiao-jiao. Construction on collision avoidance model of bogie dynamic simulation test bench [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1661-1668.
[6] ZHAO Wei-qiang, GAO Ke, WANG Wen-bin. Prevention of instability control of commercial vehicle based on electric-hydraulic coupling steering system [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1305-1312.
[7] SONG Da-feng, WU Xi-tao, ZENG Xiao-hua, YANG Nan-nan, LI Wen-yuan. Life cycle cost analysis of mild hybrid heavy truck based on theoretical fuel consumption model [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1313-1323.
[8] ZHU Jian-feng, ZHANG Jun-yuan, CHEN Xiao-kai, HONG Guang-hui, SONG Zheng-chao, CAO Jie. Design modification for automotive body structure based on seat pull safety performance [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1324-1330.
[9] NA Jing-xin, PU Lei-xin, FAN Yi-sa, SHEN Chuan-liang. Effect of temperature and humidity on the failure strength of Sikaflex-265 aluminum adhesive joints [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1331-1338.
[10] WANG Yan, GAO Qing, WANG Guo-hua, ZHANG Tian-shi, YUAN Meng. Simulation of mixed inner air-flow integrated thermal management with temperature uniformity of Li-ion battery [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1339-1348.
[11] JIN Li-sheng, XIE Xian-yi, GAO Lin-lin, GUO Bai-cang. Distributed electric vehicle stability control based on quadratic programming [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1349-1359.
[12] KUI Hai-lin, BAO Cui-zhu, LI Hong-xue, LI Ming-da. Idling time prediction method based on least square support vector machine [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1360-1365.
[13] WANG De-jun, WEI Wei-li, BAO Ya-xin. Actuator fault diagnosis of ESC system considering crosswind interference [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1548-1555.
[14] HU Man-jiang, LUO Yu-gong, CHEN Long, LI Ke-qiang. Vehicle mass estimation based on longitudinal frequency response characteristics [J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
[15] LIU Guo-zheng, SHI Wen-ku, Chen Zhi-yong. Finite element analysis of transmission error for hypoid gears considering installation error [J]. 吉林大学学报(工学版), 2018, 48(4): 984-989.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd