吉林大学学报(工学版) ›› 2018, Vol. 48 ›› Issue (3): 670-676.doi: 10.13229/j.cnki.jdxbgxb20170264

• Orginal Article • Previous Articles     Next Articles

Multi-parameters aerodynamic optimization of sedan

LI Qi-liang1,2, CAO Guan-ning1,2, LI Xuan1,2, YANG Zhi-gang1,2, ZHONG Li-yuan1,2   

  1. 1.Shanghai Automotive Wind Tunnel Center,Tongji University,Shanghai 201804, China;
    2.Shanghai Key Laboratory of Vehicle Aerodynamics and Vehicle Thermal Management Systems,Tongji University,Shanghai 201804,China
  • Received:2017-03-22 Online:2018-05-20 Published:2018-05-20

RICH HTML

0   

PDF (PC)

408

Abstract: A multi-parameters aerodynamic optimization of vehicle body with internal flow is carried out using genetic algorithm. The error of the aerodynamic drag coefficient between the experimental and numerical results is about 6%, indicating that the numerical simulation method is correct. Comparing the obtained intake flow and velocity contour, the difference between the simplified model with internal flow and the real model is small. Therefore, the aerodynamic optimization can be performed using the simplified flow model. Six key parameters of the body surface are selected to build a parameterized model with internal flow. The genetic algorithm based on the roulette wheel selection method and the Taguchi method is used in the aerodynamic optimization. An optimization model with an aerodynamic drag coefficient of 0.298 is obtained. Comparing with the original model, the rear trunk lid dip angle and departure angle obtained with the optimization model both contract inward. The simplified method with internal flow and the multi-parameters aerodynamic optimization method can be used to provide reference for the aerodynamic development of related model of vehicle.

Key words: vehicle engineering, sedan, internal flow, parameterized model, genetic algorithm, aerodynamic optimization

CLC Number: 

  • U467.1
[1] 刘湘云,冯俊虎,郑智贞,等. 不同前车窗角度对汽车动力性能影响的数值模拟[J]. 北京工业大学学报,2009,35(7):987-990.
Liu Xiang-yun,Feng Jun-hu,Zheng Zhi-zhen,et al.Effect of different front window angles on the automobile dynamic performances[J]. Journal of Beijing University of Technology,2009,35(7):987-990.
[2] Khondge A,Sovani S,Verma G. Automation of vehicle aerodynamic shape exploration and optimization using integrated mesh morphing and CFD[C]∥SAEPaper,2011-01-0170.
[3] Magazoni F,Buscariolo F,Maruyama F,et al. Aerodynamic shape improvement for driver side view mirror of hatchback vehicle using adjoint optimization method[C]∥SAE Paper,2015-36-0156.
[4] 郭建成,谷正气,容江磊,等. 基于Kriging模型的某轿车前轮阻风板优化[J]. 郑州大学学报:工学版,2011,32(3):125-128.
Guo Jian-cheng,Gu Zheng-qi,Rong Jiang-lei,et al.Optimization of air dam skirts of the front-wheels of a car based on kriging model[J]. Journal of Zhengzhou University(Engineering Science),2011,32(3):125-128.
[5] 容江磊,谷正气,杨易,等. 基于Kriging模型的跑车尾翼断面形状的气动优化[J]. 中国机械工程,2011,22(2):243-247.
Rong Jiang-lei,Gu Zheng-qi,Yang Yi,et al.Aerodynamic optimization of cross sectional shape for a sports car's rear wing based on kriging surrogate model[J]. China Mechanical Engineering,2011,22(2):243-247.
[6] Han T,Kaushik S,Karbon K,et al. Adjoint-driven aerodynamic shape optimization based on a combination of steady state and transient flow solutions[C]∥SAE Paper,2016-01-1599.
[7] Sun S,Chang Y,Fu Q,et al. Aerodynamic shape optimization of an SUV in early development stage using a response surface method[C]∥SAE Paper,2014-01-2445.
[8] Lundberg A,Hamlin P,Shankar D,et al. Automated aerodynamic vehicle shape optimization using neural networks and evolutionary optimization[C]∥SAE Paper,2015-01-1548.
[9] 韦甘,杨志刚,李启良. 低阻车身形体的参数化建模与气动试验[J]. 同济大学学报:自然科学版,2014,42(5):769-772,781.
Wei Gan,Yang Zhi-gang,Li Qi-liang.A parametric modeling method of low-drag car body and aerodynamic test[J]. Journal of Tongji University (Natural Science), 2014,42(5):769-772,781.
[10] 韦甘,杨志刚,李启良. 基于分步遗传算法的车身气动优化[J]. 吉林大学学报:工学版,2014,44(6):1578-1582.
Wei Gan,Yang Zhi-gang,Li Qi-liang.Aerodynamic optimization method for car body based on process costing genetic algorithm[J]. Journal of Jilin University(Engineering and Technology Edition),2014,44(6):1578-1582.
[11] Shih T H, Liou W W, Shabbir A, et al.A new k-ε eddy viscosity model for high Reynolds number turbulent flows: model development and validation[J]. Computers and Fluids,1995,24(3):227-238.
[12] Mckay M D, Beckman R J, Conover W J.Comparison of three methods for selecting values of input variables in the analysis of output from a computer code[J]. Technometrics,1979,21(2):239-245.
[1] CHANG Cheng,SONG Chuan-xue,ZHANG Ya-ge,SHAO Yu-long,ZHOU Fang. Minimizing inverter capacity of doubly-fed machine driving electric vehicles [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1629-1635.
[2] XI Li-he,ZHANG Xin,SUN Chuan-yang,WANG Ze-xing,JIANG Tao. Adaptive energy management strategy for extended range electric vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1636-1644.
[3] HE Ren,YANG Liu,HU Dong-hai. Design and analysis of refrigeration system supplied by solar auxiliary power of refrigerator car [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1645-1652.
[4] NA Jing-xin,MU Wen-long,FAN Yi-sa,TAN Wei,YANG Jia-zhou. Effect of hygrothermal aging on steel-aluminum adhesive joints for automotive applications [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1653-1660.
[5] LIU Yu-mei,LIU Li,CAO Xiao-ning,XIONG Ming-ye,ZHUANG Jiao-jiao. Construction on collision avoidance model of bogie dynamic simulation test bench [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1661-1668.
[6] WU Wei-nan,CUI Nai-gang,GUO Ji-feng,ZHAO Yang-yang. Distributed integrated method for mission planning of heterogeneous unmanned aerial vehicles [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1827-1837.
[7] ZHAO Wei-qiang, GAO Ke, WANG Wen-bin. Prevention of instability control of commercial vehicle based on electric-hydraulic coupling steering system [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1305-1312.
[8] SONG Da-feng, WU Xi-tao, ZENG Xiao-hua, YANG Nan-nan, LI Wen-yuan. Life cycle cost analysis of mild hybrid heavy truck based on theoretical fuel consumption model [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1313-1323.
[9] ZHU Jian-feng, ZHANG Jun-yuan, CHEN Xiao-kai, HONG Guang-hui, SONG Zheng-chao, CAO Jie. Design modification for automotive body structure based on seat pull safety performance [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1324-1330.
[10] NA Jing-xin, PU Lei-xin, FAN Yi-sa, SHEN Chuan-liang. Effect of temperature and humidity on the failure strength of Sikaflex-265 aluminum adhesive joints [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1331-1338.
[11] WANG Yan, GAO Qing, WANG Guo-hua, ZHANG Tian-shi, YUAN Meng. Simulation of mixed inner air-flow integrated thermal management with temperature uniformity of Li-ion battery [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1339-1348.
[12] JIN Li-sheng, XIE Xian-yi, GAO Lin-lin, GUO Bai-cang. Distributed electric vehicle stability control based on quadratic programming [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1349-1359.
[13] KUI Hai-lin, BAO Cui-zhu, LI Hong-xue, LI Ming-da. Idling time prediction method based on least square support vector machine [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1360-1365.
[14] JIAO Yu-ling, ZHANG Peng, TIAN Guang-dong, XING Xiao-cui, ZOU Lian-hui. Slotting optimization of automated warehouse based on multi-population GA [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1398-1404.
[15] WANG De-jun, WEI Wei-li, BAO Ya-xin. Actuator fault diagnosis of ESC system considering crosswind interference [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1548-1555.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] Guo Kong-hui;Wang Shuang;Ding Hai-tao;Zhang Jian-wei . Elastic coupling characteristic of unsymmetrical rubber bushings of rear suspension[J]. 吉林大学学报(工学版), 2007, 37(06): 1225 -1228 .
[2] LIU Song-shan, WANG Qing-nian, WANG Wei-hua, LIN Xin. Influence of inertial mass on damping and amplitude-frequency characteristic of regenerative suspension[J]. 吉林大学学报(工学版), 2013, 43(03): 557 -563 .
[3] CHU Liang, WANG Yan-bo, QI Fu-wei, ZHANG Yong-sheng. Control method of inlet valves for brake pressure fine regulation[J]. 吉林大学学报(工学版), 2013, 43(03): 564 -570 .
[4] LI Jing, WANG Zi-han, YU Chun-xian, HAN Zuo-yue, SUN Bo-hua. Design of control system to follow vehicle state with HIL test beach[J]. 吉林大学学报(工学版), 2013, 43(03): 577 -583 .
[5] HU Xing-jun, LI Teng-fei, WANG Jing-yu, YANG Bo, GUO Peng, LIAO Lei. Numerical simulation of the influence of rear-end panels on the wake flow field of a heavy-duty truck[J]. 吉林大学学报(工学版), 2013, 43(03): 595 -601 .
[6] WANG Tong-jian, CHEN Jin-shi, ZHAO Feng, ZHAO Qing-bo, LIU Xin-hui, YUAN Hua-shan. Mechanical-hydraulic co-simulation and experiment of full hydraulic steering systems[J]. 吉林大学学报(工学版), 2013, 43(03): 607 -612 .
[7] ZHANG Chun-qin, JIANG Gui-yan, WU Zheng-yan. Factors influencing motor vehicle travel departure time choice behavior[J]. 吉林大学学报(工学版), 2013, 43(03): 626 -632 .
[8] MA Wan-jing, XIE Han-zhou. Integrated control of main-signal and pre-signal on approach of intersection with double stop line[J]. 吉林大学学报(工学版), 2013, 43(03): 633 -639 .
[9] YU De-xin, TONG Qian, YANG Zhao-sheng, GAO Peng. Forecast model of emergency traffic evacuation time under major disaster[J]. 吉林大学学报(工学版), 2013, 43(03): 654 -658 .
[10] XIAO Yun, LEI Jun-qing, ZHANG Kun, LI Zhong-san. Fatigue stiffness degradation of prestressed concrete beam under multilevel amplitude cycle loading[J]. 吉林大学学报(工学版), 2013, 43(03): 665 -670 .
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd