Journal of Jilin University(Engineering and Technology Edition) ›› 2022, Vol. 52 ›› Issue (11): 2756-2764.doi: 10.13229/j.cnki.jdxbgxb20210385

Previous Articles    

Design and experiment of harvesting device for industrialized production line of Shanghaiqing

Bai-gong ZENG1(),Kui-liang LI1,Jin YE1,Li-li REN2(),Jaloliddin Rashidov3,Ming ZHANG1   

  1. 1.College of Engineering and Technology，Southwest University，Chongqing 400715，China
    2.College of Biological and Agricultural Engineering，Jilin University，Changchun 130022，China
    3.Faculty of Hydrotechnical Constructions，Tashkent Institute of Irrigation and Agricultural Mechanization Engineers，Tashkent 845250，Uzbekistan
  • Received:2020-08-20 Online:2022-11-01 Published:2022-11-16
  • Contact: Li-li REN E-mail:zengbaigong@163.com;liliren@jlu.edu.cn

RICH HTML

 2   

PDF (PC)

167

Abstract:

To solve the problems of low mechanization level， high labor intensity， long time consuming and low efficiency in the harvesting process of industrialized planting leafy vegetables， the representative Shanghaiqing was taken as the research object， a harvesting device with band saw cutting， screw tensioning and V-belt transmission， was designed for the production line of Shanghaiqing. Based on the theoretical research and simulation analysis of cutting process of Shanghaiqing roots， the main factors affecting the cutting effect was determined， and the prototype was trial-manufactured and orthogonal tests were carried out， the optimal combination of parameters was obtained： belt saw was no teeth， feed speed was 0.05 m/s and cutting speed was 400 r/min. The verification test results show that cutting effect is well and the end face is smooth， and the qualified rate is 88.9%. Therefore， the harvesting device meets the requirements of high efficiency and labor saving. This study can provide reference for the research and development of harvesting device in the assembly line production of industrialized planting leafy vegetables.

Key words: agricultural mechanization engineering, industrialization, Shanghaiqing, band saw cutting, simulation analysis

CLC Number: 

  • S225.92

Fig.1

3D drawing of cutting device"

Fig.2

Matching diagram of cutting device and pipeline"

Table 1

Main design parameters"

设计参数参数值
尺寸规格（长×宽×高）/（mm×mm×mm）1255×500×1000
总质量/kg≤120
切割转速/（r·min-1）300~1000
额定电压/V380
功耗/kW1.1
切割合格率/%≥85.0
切割幅宽/mm450

带锯规格（周长×宽×厚）

/（mm×mm×mm）

2830×16×0.5

Fig.3

Schematic diagram of cutting velocity synthesis"

Fig.4

Schematic diagram of root cutting force"

Fig.5

3D diagram of belt saw wheel"

Fig.6

3D drawing of the tensioning device"

Table 2

Main physical property parameters of the root"

参 数参数值
密度/（kg·m-3）946
X方向弹性模量/Pa1.5×106
Y方向弹性模量/Pa1.5×106
Z方向弹性模量/Pa4×106
泊松比0.3

Fig.7

Grid generation of roots cutting model"

Fig.8

Severed roots"

Fig.9

Tooth types of belt saw"

Fig.10

Simulation stress-speed result diagram"

Fig.11

Distribution map of planting spacing of Shanghaiqing"

Fig.12

Test preparation"

Fig.13

Cutting speed-damage rate diagram"

Fig.14

Cut state of Shanghaiqing"

Table 3

Scheme and results of orthogonal test"

序号试验因子合格率/%
A/（m?s-1）B/（r?min-1）空列C
11：0.031：40011：锯齿82.60
212：50022：月牙82.60
313：60033：光刃92.60
42：0.0412394.95
5223177.60
6231282.60
73：0.0513287.60
8321394.95
9332178.90
K1j257.80265.15260.15239.10
K2j255.15255.15244.25252.80
K3j261.45254.10262.80282.50
Rj6.3011.053.7040.40

Fig.15

Effect picture of Shanghaiqing harvest"

1 糜南宏, 赵映, 秦广明, 等. 蔬菜全程机械化研究现状与对策[J]. 中国农机化学报, 2014, 35(3): 66-69.
Mi Nan-hong, Zhao Ying, Qin Guang-ming, et al. Vegetables full-mechanization research present situation and the countermeasures[J]. Journal of Chinese Agricultural Mechanization, 2014, 35(3): 66-69.
2 李佩珊, 马善婷. 中国蔬菜种植面积目前已突破3亿亩[J]. 中国食品, 2019(15): 153.
Li Pei-shan, Ma Shan-ting. China's vegetable planting area having broken through 20 million hectare[J]. China Food, 2019(15): 153.
3 杨其长. 植物工厂现状与发展战略[J]. 农业工程技术, 2016, 36(10): 9-12.
Yang Qi-chang. Present situation and development strategy of plant factory[J]. Agricultural Engineering Technology, 2016, 36(10): 9-12.
4 金月, 肖宏儒, 肖苏伟, 等. 叶类蔬菜收获技术与装备研究现状及发展趋势[J]. 中国农业科技导报, 2018, 20(9): 78-84.
Jin Yue, Xiao Hong-ru, Xiao Su-wei, et al. Research statue and development trendency on leaf vegetable harvesting technology and equipment[J]. Journal of Agricultural Science and Technology, 2018, 20(9): 78-84.
5 王俊, 杜冬冬, 胡金冰, 等. 蔬菜机械化收获技术及其发展[J]. 农业机械学报, 2014, 45(2): 81-87.
Wang Jun, Du Dong-dong, Hu Jin-bing, et al.Vegetable mechanized harvesting technology and it's development[J]. Transactions of the Chinese Society for Agricultural Machinery, 2014, 45(2): 81-87.
6 高国华, 王天宝. 温室雾培蔬菜收获机收获机构的研究设计[J]. 农机化研究, 2015, 37(10): 91-97.
Gao Guo-hua, Wang Tian-bao. Design of aeroponics greenhouse vegetable harvester harvesting machanism[J]. Journal of Agricultural Mechanization Research, 2015, 37(10): 91-97.
7 申屠留芳, 张炎, 孙星钊, 等. 叶类蔬菜收获机的设计[J]. 中国农机化学报, 2016, 37(11): 20-23.
Liu-fang Shen-tu, Zhang Yan, Sun Xing-zhao, et al. Design of leaf vegetable harvester[J]. Journal of Chinese Agricultural Mechanization, 2016, 37(11): 20-23.
8 秦广明, 赵映, 肖宏儒, 等. 高速双动小型手扶式叶菜收获机设计与运动分析[J]. 中国农机化学报, 2015, 36(5): 9-12.
Qin Guang-ming, Zhao Ying, Xiao Hong-ru, et al. Design and movement analysis of double-acting cutting device of small walking leafy vegetables harvester[J]. Journal of Chinese Agricultural Mechanization, 2015, 36(5): 9-12.
9 莫浩. 水培生菜自动采收装置的设计与研究[D]. 咸阳: 西北农林科技大学机械与电子工程学院, 2018.
Mo Hao. Design and research of the automatic harvesting machine of hydroponic lettuce[D]. Xianyang: Mechanical and Electronic Engineering, Northwest A＆F University, 2018.
10 徐赛超. 植物工厂生菜自动化采收系统的设计及试验[D]. 镇江: 江苏大学农业工程学院, 2017.
Xu Sai-chao. Design and experiment of automatic harvesting system for lettuce in plant factory[D]. Zhenjiang: School of Agricultural Engineering, Jiangsu University, 2017.
11 Brown D, Glancey J L. Theoretical and experimental analysis of a continuous-blade cutting system for leafy vegetables[J]. Transactions of the ASABE, 2007, 50(3): 803-813.
12 Nangvn Y. Development of prototype harvester for head lettuce[J]. Engineering in Agriculture, Environment and Food, 2015, 8(1): 18-25.
13 Shibata Y. Development of a crisp head lettuce harvester[J]. Bulletin of the Chugoku National Agricultural Experiment Station, 1990, 7: 17-36.
14 韦勇, 秦广明, 金月, 等. 叶菜收获机械的研究现状及发展趋势[J]. 农业开发与装备, 2016(8): 98-100.
Wei Yong, Qin Guang-ming, Jin Yue, et al. Research status and development trend of leafy vegetable harvesting machinery[J]. Agricultural Development & Equipments, 2016(8): 98-100.
15 花军. 现代木工机床结构[M]. 哈尔滨: 东北林业大学出版社, 2006.
16 中华人民共和国机械行业标准. . 木工带锯机 锯轮 [S].
17 江平, 丁泽林, 丁侠胜, 等. 带锯床张紧装置结构设计[J]. 轻工机械, 2017, 35(1): 82-85.
Ping Jang, Ding Ze-lin, Ding Xia-sheng, et al. Structural design of tensioning device in band sawing machine[J]. Light Industry Machinery, 2017, 35(1): 82-85.
18 孙桓. 机械原理[M]. 西安: 西北工业大学出版社, 2016.
19 丛茜, 徐金, 马博帅, 等. 基于虚拟仿真的拖拉机后悬挂检测装置设计与实验[J]. 吉林大学学报: 工学版, 2021, 51(2): 754-760.
Cong Qian, Xu Jin, Ma Bo-shuai, et al. Design and test of tractor hydraulic suspension system testing device based on virtual simulation[J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(2): 754-760.
20 张克平, 黄建龙, 杨敏, 等. 冬小麦籽粒受挤压特性的有限元分析及试验验证[J]. 农业工程学报, 2010(6): 352-356.
Zhang Ke-ping, Huang Jian-long, Yang Min, et al. Finite element analysis and experimental verification of wheat grain under compression loads[J]. Transactions of the Chinese Society of Agricultural Engineering, 2010(6): 352-356.
21 薛钊, 付君, 陈志, 等. 青饲玉米收获机械切碎装置参数优化试验[J]. 吉林大学学报: 工学版, 2020, 50(2): 739-748.
Xue Zhao, Fu Jun, Chen Zhi, et al. Optimization experiment on parameters of chopping device of forage maize harvester[J]. Journal of Jilin University(Engineering and Technology Edition), 2020, 50(2): 739-748.
22 马义东, 徐灿, 崔永杰, 等. 水培生菜整株低损收获装置设计与试验[J]. 农业机械学报, 2019, 50(1): 162-169.
Ma Yi-dong, Xu Can, Cui Yong-jie, et al. Design and test of harvester for whole hydroponic lettuce with low damage[J]. Transactions of the Chinese Society for Agricultural Machinery, 2019, 50(1): 162-169.
[1] Shan ZENG,Deng-pan HUANG,Wen-wu YANG,Wei-jian LIU,Zhi-qiang WEN,Li ZENG. Design and test of the chassis of triangular crawler reclaiming rice harvester [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(8): 1943-1950.
[2] Guo-liang WEI,Qing-song ZHANG,Biao WANG,Kun HE,Qing-xi LIAO. Analysis and experiment on parameters of plough body of rapeseed direct seeder [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(7): 1709-1718.
[3] Xing-yu WAN,Qing-xi LIAO,Ya-jun JIANG,Yi-yin SHAN,Yu ZHOU,Yi-tao LIAO. Discrete element simulation and experiment of mechanized harve- sting and chopping process for fodder rape crop harvest [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(11): 2735-2745.
[4] Guang-qiang ZHU,Tian-yu LI,Fu-jun ZHOU. Design and experiment of flexible clamping and conveying device for bionic ear picking of fresh corn [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(10): 2486-2500.
[5] Wen-hui ZHANG,Jing YI,Wei LIU,Qiu-ying YU,Lian-zhen WANG. Injury mechanism of occupants in bus during rear-end crash based on MADYMO [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(1): 118-126.
[6] Ming LI,Qing-feng XUE,Ke-xin ZHANG,Ran LYU,Chang-hua WEI. Performance analysis of electric vehicle heat pump air conditioning system [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(6): 1943-1952.
[7] Rong-qing LIANG,Bo ZHONG,He-wei MENG,Zhi-min SUN,Za KAN. Design of 4QJ⁃3 type pickup header of silage oat [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(5): 1887-1896.
[8] Jia-cheng YUAN,Chang WANG,Kun HE,Xing-yu WAN,Qing-xi LIAO. Effect of components mass ratio under sieve on cleaning system performance for rape combine harvester [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(5): 1897-1907.
[9] Xue-shen CHEN,Zhu-jian HUANG,Xu MA,Long QI,Gui-jin FANG. Design and test of control system for rice mechanical weeding and seedling-avoiding control [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(1): 386-396.
[10] Jun FU,Yi-chen ZHANG,Chao CHENG,Zhi CHEN,Xin-long TANG,Lu-quan REN. Design and experiment of bow tooth of rigid flexible coupling for wheat threshing [J]. Journal of Jilin University(Engineering and Technology Edition), 2020, 50(2): 730-738.
[11] Zhao XUE,Jun FU,Zhi CHEN,Feng-de WANG,Shao-ping HAN,Lu-quan REN. Optimization experiment on parameters of chopping device of forage maize harvester [J]. Journal of Jilin University(Engineering and Technology Edition), 2020, 50(2): 739-748.
[12] Chao CHENG,Jun FU,Fu-ping HAO,Zhi CHEN,De-yi ZHOU,Lu-quan REN. Effect of motion parameters of cleaning screen on corn cob blocking law [J]. Journal of Jilin University(Engineering and Technology Edition), 2020, 50(1): 351-360.
[13] Chao CHENG,Jun FU,Xin⁃long TANG,Zhi CHEN,Lu⁃quan REN. Effects of vibration mode on interface adhesion law of rice threshed mixtures [J]. Journal of Jilin University(Engineering and Technology Edition), 2019, 49(4): 1228-1235.
[14] WANG Yang, WANG Xiao-mei, CHEN Ze-ren, YU Jian-qun. Modeling method of maize kernels based on discrete element method [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1537-1547.
[15] WANG Yang, LYU Feng-yan, XU Tian-yue, YU Jian-qun. Shape and size analysis of soybean kernel and modeling [J]. 吉林大学学报(工学版), 2018, 48(2): 507-517.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd