吉林大学学报(工学版) ›› 2013, Vol. 43 ›› Issue (04): 891-896.doi: 10.7964/jdxbgxb201304008
• paper • Previous Articles Next Articles
PENG Yong1, SUN Li-jun2
CLC Number:
[1] American Association of State Highway and Transportation Official (AASHTO). Segregation: Causes and Cures for Hot Mix Asphalt[M]. Washington DC: AASHTO, 1997.[2] Williams R C, Duncan G R, White T. Sources, measurement, and effects of segregated hot-mix asphalt pavement. Report FHWA-SA-96-016, Washington DC: Federal Highway Administration, 1996.[3] Mcghee K K, Flintsch G W, Edgar D E León Izeppi. Using high-speed texture measurements to improve the uniformity of asphalt mixture. Charlottesville: Virginia Transportation Research Council, 2003.[4] Yue Z Q, William B, Isabelle Morin. Application of digital image processing to quantitative study of asphalt concrete microstructure//Transportation Research Record 1492,Washington DC: TRB, 1995:53-60.[5] US Department of Transportation. Simulation, imaging and mechanics of asphalt pavements. Virginia: Turner-Fairbanks Highway Research Center, 1998.[6] Obaidat M T, Msaeid H R, Gharaybeh F, et al. An innovative digital image analysis approach to quantify the percentage of voids in mineral aggregates of bituminous mixtures[J]. Canadian Journal of Civil Engineering, 1998, 25:1041-1049.[7] Wang L B, Lai J S. Quantify specific surface area of aggregates using an imaging technique//Washington DC: TRB, 1998.[8] Kose S. Development of a virtual test procedure for Asphalt concrete. Madison: University of Wisconsin-Madison, 2002.[9] Rousan T M. Characterization of aggregate shape properties using a computer automated system . College Station: Texas A & M University, 2004.[10] Tashman L, Masad E, Peterson B, et al. Internal structure analysis of asphalt mixes to improve the simulation of superpave gyratory compaction to field conditions[J]. Journal of the Association of Asphalt Paving Technologists, 2001, 70: 605-645.[11] Hunter A E, Airey G D, Collop A C. Aggregate orientation and segregation in laboratory compacted asphalt samples//Washington DC: TRB, 2004.[12] Azari H, McCuen R, Stuart K. The effect of vertical inhomogeneity on compressive properties of asphalt mixtures[J]. Journal of the Association of Asphalt Paving Technologists, 2004, 73: 121-145.[13] Azari H. Effect of aggregate inhomogeneity on mechanical properties of asphalt mixtures//Advanced Characterisation of Pavement and Soil Engineering Materials, 2007: 291-302.[14] Azari H, McCuen R, Stuart K. Effect of radial inhomogeneity on shear properties of asphalt mixtures[J]. Journal of Materials in Civil Engineering,2005, 17 (1): 80-88.[15] 蒯海东. 基于数字图象处理的HMA集料形状及分布特征研究. 南京:东南大学,2005. Kuai Hai-dong. Study of form and distribution characters for aggregrates in HMA based on digital image processing. Nanjing:Southeast University,2005.[16] 吴文亮,李智,张肖宁. 用数字图像处理技术评价沥青混合料均匀性[J]. 吉林大学学报:工学版,2009,39(4):921-925. Wu Wen-liang, Li Zhi, Zhang Xiao-ning. Evaluation of asphalt mixture homogeneity with digital image processing technique[J]. Journal of Jilin University (Engineering and Technology Edition), 2009, 39(4): 921-925.[17] 彭勇,孙立军,王元清,等. 数字图像处理在沥青混合料均匀性评价中的应用[J]. 吉林大学学报:工学版,2007,37(2):334-337. Peng Yong, Sun Li-jun, Wang Yuan-qing, et al. Application of digital image processing in evaluating homogeneity of asphalt mixture[J]. Journal of Jilin University (Engineering and Technology Edition), 2007, 37(2): 334-337.[18] Peng Y, Sun L J. Towards an index of asphalt mixture homogeneity[J]. Road Materials and Pavement Design, 2009, 10 (3): 545-567.[19] Chang G K, Meegoda J N. Micro-mechanic model for temperature effects of hot mixture asphalt concrete//Transportation Research Record 1687, Washington DC: TRB, 1999: 95-103.[20] Buttlar W G, You Z. Discrete element modeling of asphalt concrete: Microfabric approach//Transportation Research Record,Washington DC, 2001, 1757:111-118.[21] Guddati M N, Feng Z, Kim R. Toward a micromechanics-based procedure to characterize fatigue performance of asphalt concrete//Transportation Research Record,Washington DC, 2002, 1789:121-128.[22] Wang L B, Myers L A, Mohammad L N, et al. Micromechanics study on top-down cracking //Transportation Research Record, Washington DC, 2003, 1853: 121-133.[23] Dai Q, Sadd M H. Parametric model study of microstructure effects on damage behavior of asphalt samples[J]. International Journal of Pavement Engineering, 2004, 5(1): 19-30.[24] Dai Q, Sadd M H, Parameswaran V, et al. Prediction of damage behaviors in asphalt materials using a micromechanical finite-element model and image analysis[J]. Journal of Engineering Mechanics, 2005, 131(7): 668-677.[25] Kim H, Buttlar W G. Micromechanical fracture modeling of asphalt mixture using the discrete element method[J]. Journal of the Association of Asphalt Paving Technologists, 2005, 74: 209-223.[26] Sadd M H, Dai Q, Parameswaran V. Microstructural simulation of asphalt materials: Modeling and experimental studies[J]. Journal of Materials in Civil Engineering, 2004, 16(2): 107-115.[27] Papagiannakis A T, Abbas A, Masad E. Micromechanical analysis of viscoelastic properties of asphalt concretes//Transportation Research Record 1789,Washington DC, 2002, 113-120.[28] Li G, Li Y, Metcalf J B, et al. Elastic modulus prediction of asphalt concrete[J]. Journal of Materials in Civil Engineering, 1999, 11(3): 236-241.[29] Li Y, Metcalf J B. Two-step approach to prediction of asphalt concrete modulus from two-phase micromechanical models[J]. Journal of Materials in Civil Engineering, 2005, 17(4): 407-415.[30] Collop A C, McDowell G R, Lee Y. Modelling the behaviour of an idealised asphalt mixture using the distinct element method//Washington DC: TRB, 2004.[31] You Z P, Adhikari S, Dai Q L. Three-dimensional discrete element models for asphalt mixtures [J]. Journal of Engineering Mechanics, 2008, 134(12): 1053-1063.[32] 王新飞. 沥青混合料细观结构的粘弹性力学及断裂力学数值分析. 杭州:浙江大学,2011. Wang Xin-fei. Numerical analysis of viscoelastic and fracture mechanics of asphalt mixture microstructure. Hangzhou: Zhejiang University, 2011.[33] 彭勇,孙立军,石永久,等. 沥青混合料均匀性与路用性能指标的关系[J]. 同济大学学报:自然科学版,2008,36(4):488-492. Peng Yong, Sun Li-jun, Shi Yong-jiu, et al. Relationship between homogeneity and indices of asphalt pavement performance[J]. Journal of Tongji University (Natural Science), 2008, 36(4): 488-492. |
[1] | LI Yi,LIU Li-ping,SUN Li-jun. Prediction model on rutting equivalent temperature for asphalt pavement at different depth [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1703-1711. |
[2] | GUO Hao-tian,XU Tao,LIANG Xiao,YU Zheng-lei,LIU Huan,MA Long. Optimization on thermal surface with rib turbulator inspired by turbulence of alopias' gill in simplified gas turbine transition piece [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1793-1798. |
[3] | GONG Ya-feng, WANG Bo, WEI Hai-bin, HE Zi-heng, HE Yu-long, SHEN Yang-fan. Surface subsidence law of double-line shield tunnel based on Peck formula [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1411-1417. |
[4] | ZANG Guo-shuai, SUN Li-jun. Method based on inertial point for setting depth to rigid layer [J]. 吉林大学学报(工学版), 2018, 48(4): 1037-1044. |
[5] | NIAN Teng-fei, LI Ping, LIN Mei. Micro-morphology and gray entropy analysis of asphalt characteristics functional groups and rheological parameters under freeze-thaw cycles [J]. 吉林大学学报(工学版), 2018, 48(4): 1045-1054. |
[6] | QIU Yan-kai, LI Bao-ren, YANG Gang, CAO Bo, LIU Zhen. Characteristics and mechanism reducing pressure ripple of hydraulic system with novel hydraulic muffler [J]. 吉林大学学报(工学版), 2018, 48(4): 1085-1091. |
[7] | GONG Ya-feng, SHEN Yang-fan, TAN Guo-jin, HAN Chun-peng, HE Yu-long. Unconfined compressive strength of fiber soil with different porosity [J]. 吉林大学学报(工学版), 2018, 48(3): 712-719. |
[8] | LIANG Xiao-bo, CAI Zhong-yi, GAO Peng-fei. Numerical simulation and experiment of cylindrical forming of sandwich composite panel [J]. 吉林大学学报(工学版), 2018, 48(3): 828-834. |
[9] | CHENG Yong-chun, BI Hai-peng, MA Gui-rong, GONG Ya-feng, TIAN Zhen-hong, LYU Ze-hua, XU Zhi-shu. Pavement performance of nano materials-basalt fiber compound modified asphalt binder [J]. 吉林大学学报(工学版), 2018, 48(2): 460-465. |
[10] | JI Wen-yu, LI Wang-wang, GUO Min-long, WANG Jue. Experimentation and calculation methods of prestressed RPC-NC composite beam deflection [J]. 吉林大学学报(工学版), 2018, 48(1): 129-136. |
[11] | LIU Chun-guo, LIU Wei-dong, DENG Yu-shan. Effect of multi-point punch active loading path on the stretch-forming of sheet [J]. 吉林大学学报(工学版), 2018, 48(1): 221-228. |
[12] | ZHANG Yang-peng, WEI Hai-bin, JIA Jiang-kun, CHEN Zhao. Numerical evaluation on application of roadbed with composite cold resistance layer inseasonal frozen area [J]. 吉林大学学报(工学版), 2018, 48(1): 121-126. |
[13] | MA Ye, NI Ying-sheng, XU Dong, DIAO Bo. External prestressed strengthening based on analysis of spatial grid model [J]. 吉林大学学报(工学版), 2018, 48(1): 137-147. |
[14] | LYU Meng-meng, GU Zheng-wei, XU Hong, LI Xin. Process optimization of hot stamping for anti-collision beam with ultra high strength [J]. 吉林大学学报(工学版), 2017, 47(6): 1834-1841. |
[15] | LUO Rong, ZENG Zhe, ZHANG De-run, FENG Guang-le, DONG Hua-jun. Moisture stability evaluation of asphalt mixture based on film pressure model of Wilhelmy plate method [J]. 吉林大学学报(工学版), 2017, 47(6): 1753-1759. |
|