吉林大学学报(工学版) ›› 2013, Vol. 43 ›› Issue (05): 1290-1294.doi: 10.7964/jdxbgxb201305023

• paper • Previous Articles     Next Articles

Impact of tooth surface friction on harmonic resonance of gear system

LI Wen-liang1, WANG Li-qin1, CHANG Shan2, DAI Guang-hao2   

  1. 1. School of Mechanical Engineering, Harbin Institute of Technology, Harbin 150001, China;
    2. China Shipbuilding Industry Corporation 703 Institute, Harbin 150078, China
  • Received:2012-05-29 Online:2013-09-01 Published:2013-09-01

RICH HTML

0   

PDF (PC)

330

Abstract:

The gear dynamic equation was constructed, which takes the tooth surface friction into consideration. The equation was solved by the multi-scale method. The influence of the friction coefficient on the main resonance frequency response was analyzed. On the basis, the influences of the static load, dynamic load and the damping coefficient on the main resonance frequency response were investigated. The results show that the tooth surface friction can effectively reduce the resonance amplitude. When the static load is larger its influence on the resonance frequency is greater. The dynamic load and damping factor can reduce the resonance amplitude, but their influence on the resonance frequency is not obvious.

Key words: mechanical design, involute gear, friction force, frequency response, harmonic resonance

CLC Number: 

  • TH132.41

[1] Wang J, Li R, Peng X. Survey of nonlinear vibration of gear transmission systems[J]. ASME Applied Mechanics Review, 2003, 56(3):309-329.

[2] Velex P, Ajmi M. On the modeling of excitations in geared systems by transmission errors[J]. Journal of Sound and Vibration, 2006, 290(3-5):882-909.

[3] Kahraman A, Kharazi A A, Umrani M. A deformable body dynamic analysis of planetary gears with thin rims[J]. Journal of Sound and Vibration, 2003, 262(3):752-768.

[4] Vaishya M, Singh R. Sliding friction-induced non-linearity and parametric effects in gear dynamics[J]. Journal of Sound and Vibration, 2001, 248(4):671-694.

[5] Velex P, Cahouet V. Experimental and numerical investigations on the influence of tooth friction in spur and helical gear dynamics[J]. ASME J Mech Des, 2000, 122(4):515-522.

[6] Ozguven H, Houser N. Dynamic analysis of high speed gears by using loaded static transmission error[J]. Journal of Sound and Vibration, 1988, 125(1):71-83.

[7] Manish Vaishya, Rajendra Singh. Strategies for modeling friction in gear dynamics[J]. Journal of Mechanical Design, 2003, 125(2):383-393.

[8] 李瑰贤,于广滨,温建民,等.求解齿轮系统非线性动力学微分方程的多尺度法[J].吉林大学学报:工学版,2008,38(1):75-79. Li Gui-xian, Yu Guang-bin, Wen Jian-min, et al. Method of multiple scales in solving nonlinear dynamic differential equation of gear system[J]. Journal of Jilin University (Engineering and Technology Edition), 2008, 38(1):75-79.

[9] 王建平,王玉新.齿轮系统谐波共振的多尺度分析方法[J].机械设计与研究,2005,21(4):43-46. Wang Jian-ping, Wang Yu-xin. Harmonious resonance research of spur gear system through multi-scale approach[J]. Machine Design and Research, 2005, 21(4):43-46.
[1] BI Qiu-shi,WANG Guo-qiang,HUANG Ting-ting,MAO Rui,LU Yan-peng. Tooth strength analysis of mineral sizer by coupling discrete element method and finite element method [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1770-1776.
[2] ZHU Wei,WANG Chuan-wei,GU Kai-rong,SHEN Hui-ping,XU Ke,WANG Yuan. Stiffness and dynamics analysis of a new type of tensegrity parallel mechanism [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1777-1786.
[3] LIU Jian-fang, WANG Ji-bo, LIU Guo-jun, LI Xin-bo, LIANG Shi-hai, YANG Zhi-gang. PMMA micromixer embedded with 3D channel based on piezoelectric actuation [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1500-1507.
[4] WANG Tao, SAN Xiao-gang, GAO Shi-jie, WANG Hui-xian, WANG Jing, NI Ying-xue. Dynamic characteristics of vertical shaft system of photoelectric turntable [J]. 吉林大学学报(工学版), 2018, 48(4): 1099-1105.
[5] HE Ji-lin, CHEN Yi-long, WU Kang, ZHAO Yu-ming, WANG Zhi-jie, CHEN Zhi-wei. Energy flow analysis of crane hoisting system and experiment of potential energy recovery system [J]. 吉林大学学报(工学版), 2018, 48(4): 1106-1113.
[6] XIE Chuan-liu, TANG Fang-ping, SUN Dan-dan, ZHANG Wen-peng, XIA Ye, DUAN Xiao-hui. Model experimental analysis of pressure pulsation in vertical mixed-flow pump system [J]. 吉林大学学报(工学版), 2018, 48(4): 1114-1123.
[7] SUN Xiu-rong, DONG Shi-min, WANG Hong-bo, LI Wei-cheng, SUN Liang. Comparison of multistage simulation models of entire sucker rod with spatial buckling in tubing [J]. 吉林大学学报(工学版), 2018, 48(4): 1124-1132.
[8] YOSHINO Tatsuo, FAN Lu-lu, YAN Lei, XU Tao, LIN Ye, GUO Gui-kai. Multiobjective optimization design for dummy chest structure based on MBNWS algorithm [J]. 吉林大学学报(工学版), 2018, 48(4): 1133-1139.
[9] LIU Kun, LIU Yong, YAN Jian-chao, JI Shuo, SUN Zhen-yuan, XU Hong-wei. Dynamic analysis of sit-to-stand human motion based on in vitro-sensor detection [J]. 吉林大学学报(工学版), 2018, 48(4): 1140-1146.
[10] LIU Zhi-feng, ZHAO Dai-hong, WANG Yu-mo, HUN Lian-ming, ZHAO Yong-sheng, DONG Xiang-min. Relationship between bearing capacity of heavy machine hydrostatic rotary table and temperature field distribution of oil pad [J]. 吉林大学学报(工学版), 2018, 48(3): 773-780.
[11] CAO Jing-hua, KONG Fan-sen, RAN Yan-zhong, SONG Rui-chen. Back pressure controller design of air compressor based on fuzzy self-adaptive PID control [J]. 吉林大学学报(工学版), 2018, 48(3): 781-786.
[12] LI Rui, ZHANG Lu-yang, LIU Lin, WU Yue-yuan, CHEN Shi-wei. Magneto-rheological vibration isolation for three-span bridge based on similarity theory [J]. 吉林大学学报(工学版), 2018, 48(3): 787-795.
[13] CHEN Zhong-min, HOU Li, DUAN Yang, ZHANG Qi, YANG Zhong-xue, JIANG Yi-qiang. Vibration analysis of a new pin-cycloid speed reducer [J]. 吉林大学学报(工学版), 2018, 48(1): 174-185.
[14] LIU Nian, XU Tao, XU Tian-shuang, HU Xian-lei, LIU Wei-hai. Lightweight design of TRB dashboard cross beam [J]. 吉林大学学报(工学版), 2018, 48(1): 199-204.
[15] LI Jia-qi, NI Ji-min, GAO Xu-nan, SHI Xiu-yong, XU Xiao-chuan. Analysis of lubrication performance of floating ring bearing considering radial temperature gradient [J]. 吉林大学学报(工学版), 2017, 47(6): 1782-1790.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd