吉林大学学报(工学版) ›› 2016, Vol. 46 ›› Issue (2): 471-478.doi: 10.13229/j.cnki.jdxbgxb201602021

• Orginal Article • Previous Articles     Next Articles

Analysis of contact ratio of point contact orthogonal variable transmission ratio face gear

LIN Chao, GU Si-jia, LIU Yi   

  1. State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400044, China
  • Received:2014-06-29 Online:2016-02-20 Published:2016-02-20

RICH HTML

0   

PDF (PC)

359

Abstract: To improve the transmission quality and bearing capacity of orthogonal variable transmission ratio face gear, the influences of the geometric parameters of gear pair on the contact ratio are investigated. According to the spatial gear meshing theory, the meshing coordinate is established and the equations of the section curve and crest curve s are deduced. The orthogonal variable transmission ratio face gear is transformed to non-circular gear rack and pinion. The calculation method of the contact ratio is proposed, and the influences of the geometric parameters of cutter gear and gear pair on the contact ratio are analyzed. The proposed calculation method of the contact ratio is verified by the measurement experiment of the actual contact ratio.

Key words: mechanical design, contact ratio, variable transmission ratio, face gear, pinion

CLC Number: 

  • TH132
[1] 龚海.正交非圆面齿轮副的传动设计与特性分析[D].重庆:重庆大学机械工程学院,2012.
Gong Hai.Transmission design and characteristic analysis of orthogonal non-circular face gear drive[D].Chongqing: College of Mechanical Engineering, Chongqing University,2012.
[2] 邓效忠,方宗德.弧齿锥齿轮的齿距误差对传动性能的影响研究[J].航空动力学报,2002, 17(2):268-272.
Deng Xiao-zhong,Fang Zong-de. Study on contact ratio of spiral bevel gears and influence of pitch error[J]. Journal of Aerospace Power, 2002, 17(2):265-272.
[3] 刘志峰,张志民,张敬莹,等. 基于多项式的等高齿锥齿轮时变啮合刚度建模[J]. 吉林大学学报:工学版,2013, 43(4):939-944.
Liu Zhi-feng, Zhang Zhi-min, Zhang Jing-ying,et al. Moelling of high-spiral bevel gear mesh stiffness based on polynomial[J]. Journal of Jilin University (Engineering and Technology Edition),2013, 43(4):939-944.
[4] 聂玲.椭圆锥齿轮啮合特性及其承载能力分析[D].重庆:重庆大学机械工程学院,2013.
Nie Ling. Meshing characteristics and load capacity analysis of elliptical bevel gear[D].Chongqing: College of Mechanical Engineering, Chongqing University,2013.
[5] 王雷,张瑞.基于啮合角函数的非圆齿轮重合度求解[J].机械传动,2009,33(2):14-19.
Wang Lei, Zhang rui. Research on a novel transmission mechanism based on the principle of space curve mesh[J]. Journal of Mechanical Transmission, 2009,33(2):14-19.
[6] 邓效忠,方宗德.高重合度弧齿锥齿轮的性能分析与试验研究[J].航空动力学报,2003,18(6):744-748.
Deng Xiao-zhong, Fang Zong-de. Analysis of meshing behavior and experiments of spiral bevel gears with high contact ratio[J]. Journal of Aerospace Power, 2003,18(6):744-748.
[7] 陈安华,罗善明,王文明,等.齿轮系统动态传递误差和振动稳定性的数值研究[J].机械工程学报, 2004,40(4):21-25.
Chen An-hua,Luo Shan-ming,Wang Wen-ming,et al. Numerical investigations on dynamic transmission error and stability of a geared rotor-bearing system[J].Chinese Journal of Mechanical engineering, 2004,40(4):21-25.
[8] Gosselin C, Cloutier L, Nguyen Q D. A general formulation for the calculation of the load sharing and transmission error under load sharing and transmission error under load of spiral bevel and hypoid gears[J]. Mech Mach Theory,1995,30(3):433-450.
[9] Gosselin C, Gagnon P, Cloutier L. Accurate tooth stiffness of spiral bevel gear teeth by the finite strip method[J]. Journal of Mechanical Design,1998,120(4):599-605.
[10] Sugimoto M, Maruyama N. Effect of tooth contact and gear dimensions on transmission errors of loaded hypoid gears[J]. Journal of Mechanical Design, 1991,113(2): 182-187.
[11] Cui Y M,Fang Z D,Su J Z,et al. Precise modeling of arc tooth face-gear with transition curve[J].Chinese Journal of Aeronautics,2013,26(5):1346-1351.
[12] Litvin F L, Zhang Y, Wang J C, et al. Design and geometry of face-gear drives[J].Journal of Mechanical Design,1992,114(4): 642-647.
[13] Zanzi C, Pedrero J I. Application of modified geometry of face gear drive[J].Computer Methods in Applied Mechanics and Engineering,2005,194(27-29):3047-3066.
[14] Litvin F L. Gear Geometry and Applied Theory[M]. Englewood Cliffs, New Jersey:Prentice Hall, Inc.,1994.
[15] Litvin F L, Gonzalez-Perez I,Fuentes A, et al. Design,generation and stress analysis of face-gear drive with helical pinion[J]. Computer Methods in Applied Mechanics and Engineering,2005, 194(36-38):3870-3901.
[1] BI Qiu-shi,WANG Guo-qiang,HUANG Ting-ting,MAO Rui,LU Yan-peng. Tooth strength analysis of mineral sizer by coupling discrete element method and finite element method [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1770-1776.
[2] ZHU Wei,WANG Chuan-wei,GU Kai-rong,SHEN Hui-ping,XU Ke,WANG Yuan. Stiffness and dynamics analysis of a new type of tensegrity parallel mechanism [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1777-1786.
[3] LIU Jian-fang, WANG Ji-bo, LIU Guo-jun, LI Xin-bo, LIANG Shi-hai, YANG Zhi-gang. PMMA micromixer embedded with 3D channel based on piezoelectric actuation [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1500-1507.
[4] WANG Tao, SAN Xiao-gang, GAO Shi-jie, WANG Hui-xian, WANG Jing, NI Ying-xue. Dynamic characteristics of vertical shaft system of photoelectric turntable [J]. 吉林大学学报(工学版), 2018, 48(4): 1099-1105.
[5] HE Ji-lin, CHEN Yi-long, WU Kang, ZHAO Yu-ming, WANG Zhi-jie, CHEN Zhi-wei. Energy flow analysis of crane hoisting system and experiment of potential energy recovery system [J]. 吉林大学学报(工学版), 2018, 48(4): 1106-1113.
[6] XIE Chuan-liu, TANG Fang-ping, SUN Dan-dan, ZHANG Wen-peng, XIA Ye, DUAN Xiao-hui. Model experimental analysis of pressure pulsation in vertical mixed-flow pump system [J]. 吉林大学学报(工学版), 2018, 48(4): 1114-1123.
[7] SUN Xiu-rong, DONG Shi-min, WANG Hong-bo, LI Wei-cheng, SUN Liang. Comparison of multistage simulation models of entire sucker rod with spatial buckling in tubing [J]. 吉林大学学报(工学版), 2018, 48(4): 1124-1132.
[8] YOSHINO Tatsuo, FAN Lu-lu, YAN Lei, XU Tao, LIN Ye, GUO Gui-kai. Multiobjective optimization design for dummy chest structure based on MBNWS algorithm [J]. 吉林大学学报(工学版), 2018, 48(4): 1133-1139.
[9] LIU Kun, LIU Yong, YAN Jian-chao, JI Shuo, SUN Zhen-yuan, XU Hong-wei. Dynamic analysis of sit-to-stand human motion based on in vitro-sensor detection [J]. 吉林大学学报(工学版), 2018, 48(4): 1140-1146.
[10] LIU Zhi-feng, ZHAO Dai-hong, WANG Yu-mo, HUN Lian-ming, ZHAO Yong-sheng, DONG Xiang-min. Relationship between bearing capacity of heavy machine hydrostatic rotary table and temperature field distribution of oil pad [J]. 吉林大学学报(工学版), 2018, 48(3): 773-780.
[11] CAO Jing-hua, KONG Fan-sen, RAN Yan-zhong, SONG Rui-chen. Back pressure controller design of air compressor based on fuzzy self-adaptive PID control [J]. 吉林大学学报(工学版), 2018, 48(3): 781-786.
[12] LI Rui, ZHANG Lu-yang, LIU Lin, WU Yue-yuan, CHEN Shi-wei. Magneto-rheological vibration isolation for three-span bridge based on similarity theory [J]. 吉林大学学报(工学版), 2018, 48(3): 787-795.
[13] CHEN Zhong-min, HOU Li, DUAN Yang, ZHANG Qi, YANG Zhong-xue, JIANG Yi-qiang. Vibration analysis of a new pin-cycloid speed reducer [J]. 吉林大学学报(工学版), 2018, 48(1): 174-185.
[14] LIU Nian, XU Tao, XU Tian-shuang, HU Xian-lei, LIU Wei-hai. Lightweight design of TRB dashboard cross beam [J]. 吉林大学学报(工学版), 2018, 48(1): 199-204.
[15] LI Jia-qi, NI Ji-min, GAO Xu-nan, SHI Xiu-yong, XU Xiao-chuan. Analysis of lubrication performance of floating ring bearing considering radial temperature gradient [J]. 吉林大学学报(工学版), 2017, 47(6): 1782-1790.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd