Journal of Jilin University(Engineering and Technology Edition) ›› 2018, Vol. 48 ›› Issue (5): 1360-1365.doi: 10.13229/j.cnki.jdxbgxb20170904

Previous Articles     Next Articles

Idling time prediction method based on least square support vector machine

KUI Hai-lin1, BAO Cui-zhu1, LI Hong-xue1, LI Ming-da1,2   

  1. 1.College of Transportation, Jilin University, Changchun 130022, China;
    2.School of Mechatronics Engineering, Changchun Institute of Technology, Changchun 130012, China
  • Received:2017-09-01 Online:2018-09-20 Published:2018-12-11

Abstract: Engine start-stop system is widely used as it can reduce fuel consumption by turning off the engine while idling. But in traffic congestion conditions, the engine start-stop system increases fuel consumption because of turning off engine during short time idling. To solve this problem, Least Square Support Vector Machine (LS-SVM) is applied to predict the idling time, that the engine will not be turned off during short time idling. Experiment results show that the accuracy of idling time prediction using LS-SVM can reach 80%. The engine start-stop system using this method can reduce fuel consumption by about 0.2% during smooth hour. Meanwhile the driving comfort can be improved by reducing more than 50% start-stop numbers during rush hour and more than 15% during smooth hour.

Key words: vehicle engineering, start-stop system, idling time prediction, time and space learning, least squares support vector machines(LS-SVM), fuel saving control

CLC Number: 

  • U471.1
[1] GB27999—2014.乘用车燃料消耗量评价方法及指标[S].
[2] Bishop J, Nedungadi A, Ostrowski G, et al. An engine start/stop system for improved fuel economy[C]∥SAE Paper,2007-01-1777.
[3] Fonseca N, Casanova J, Valdés M.Influence of the stop/start system on CO2, emissions of a diesel vehicle in urban traffic[J]. Transportation Research Part D Transport & Environment, 2011, 16(2):194-200.
[4] 徐德富. 发动机起停系统的开发与应用[J]. 内燃机, 2013(1):9-11.
Xu De-fu.Engine start-stop system development & application[J]. Internal Combustion Engines, 2013(1):9-11.
[5] 李聪聪, 陈强, 喻凡,等. 一种微混电动车起停系统及其对车辆性能影响的分析[J]. 汽车工程, 2012, 34(10):878-884.
Li Cong-cong, Chen Qiang, Yu Fan, et al.A start-stop system for micro-HEV and the analysis on its effects on vehicle performance[J]. Automotive Engineering,2012,34(10):878-884.
[6] 陈汉玉, 俞小莉, 左承基. 发动机智能起停系统控制策略的研究[J]. 汽车工程, 2014,36(9):1145-1150.
Chen Han-yu, Yu Xiao-li, Zuo Cheng-ji.A research on the control strategy of engine smart start/stop system[J]. Automotive Engineering, 2014,36(9):1145-1150.
[7] Yuaraj K B, Sharma R, Yadav A, et al. Optimal torque handling in hybrid powertrain for fuel economy improvement[C]∥SAE Paper, 2013-26-0068.
[8] Rick A, Sisk B. A simulation based analysis of 12 V and 48 V microhybrid systems across vehicle segments and drive cycles[C]∥SAE Paper,2015-01-1151.
[9] 何仁,刘凯,黄大星,等. 发动机智能怠速停止起动系统控制策略的研究[J].汽车工程, 2010, 32(6):466-469.
He Ren, Liu Kai, Huang Da-xing, et al.A study on the control strategy of intelligent idling stop & start system of engine[J]. Automotive Engineering, 2010, 32(6):466-469.
[10] 逯家鹏, 李幼德, 吕景华,等. BSG怠速起停系统车辆控制策略研究[J]. 农业机械学报, 2016, 47(2):316-322.
Lu Jia-peng, Li You-de, Lv Jing-hua, et al.Control strategy of BSG vehicle idling start-stop system[J]. Transactions of the Chinese Society for Agricultural Machinery, 2016, 47(2):316-322.
[11] 逯家鹏. B50轿车怠速起步停车工况节油减排控制技术的研究[D]. 长春:吉林大学汽车工程学院, 2016.
Lu Jia-peng.Research on fuel saving and emission reduction control technology of B50 car idling start-stop condition[D]. Changchun: College of Automotive Engineering, Jilin University, 2016.
[12] 钟庆云. 基于工况识别的起停系统多模式控制策略研究[D]. 广州:华南理工大学电子与信息学院, 2016.
Zhong Qing-yun.Research on muti-mode control strategy of start-stop system based on driving cycle recognition[D]. Guangzhou: School of Electronic and Information Engineering, South China University of Technology, 2016.
[13] 陈运峰. 起停系统在城市道路运行工况下的使用适应性研究[D]. 长春:吉林大学交通学院, 2014.
Chen Yun-feng.The start-stop system using adaptive research under operation condition of the urban road[D]. Changchun: College of Transportation, Jilin University, 2014.
[14] 唐舟进, 任峰, 彭涛,等. 基于迭代误差补偿的混沌时间序列最小二乘支持向量机预测算法[J]. 物理学报, 2014, 63(5):50505.
Tang Zhou-jin, Ren Feng, Peng Tao,et al.A least square support vector machine prediction algorithm for chaotic time series based on the iterative error correction[J]. Acta Physica Sinica, 2014, 63(5):50505.
[15] 焦卫东, 林树森. 整体改进的基于支持向量机的故障诊断方法[J]. 仪器仪表学报, 2015, 36(8):1861-1870.
Jiao Wei-dong,Lin Shu-sen.Overall-improved fault diagnosis approach based on support vector machine[J]. Chinese Journal of Scientific Instrument, 2015, 36(8):1861-1870.
[16] Diaz-Cabrera M, Cerri P, Medici P.Robust real-time traffic light detection and distance estimation using a single camera[J]. Expert Systems with Applications,2015, 42: 3911-3923.
[17] 宋海玉. 自动图像标注及标注改善算法的研究[D]. 长春:吉林大学计算机科学与技术学院, 2012.
Song Hai-yu.Research on the automatic image annotation and annotation refinement algorithms[D]. Changchun: College of Computer Science and Technology, Jilin University, 2012.
[18] 李阳, 文敦伟, 王珂,等. 多核学习矩阵化最小二乘支持向量机算法及肺结节识别[J]. 吉林大学学报:工学版, 2014, 44(2):508-515.
Li Yang, Wen Dun-wei, Wang Ke, et al.Multiple kernel MtLSSVM and its application in lung nodule recognition[J]. Journal of Jilin University(Engineering and Technology Edition) , 2014, 44(2):508-515.
[1] CHANG Cheng,SONG Chuan-xue,ZHANG Ya-ge,SHAO Yu-long,ZHOU Fang. Minimizing inverter capacity of doubly-fed machine driving electric vehicles [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1629-1635.
[2] XI Li-he,ZHANG Xin,SUN Chuan-yang,WANG Ze-xing,JIANG Tao. Adaptive energy management strategy for extended range electric vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1636-1644.
[3] HE Ren,YANG Liu,HU Dong-hai. Design and analysis of refrigeration system supplied by solar auxiliary power of refrigerator car [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1645-1652.
[4] NA Jing-xin,MU Wen-long,FAN Yi-sa,TAN Wei,YANG Jia-zhou. Effect of hygrothermal aging on steel-aluminum adhesive joints for automotive applications [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1653-1660.
[5] LIU Yu-mei,LIU Li,CAO Xiao-ning,XIONG Ming-ye,ZHUANG Jiao-jiao. Construction on collision avoidance model of bogie dynamic simulation test bench [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1661-1668.
[6] ZHAO Wei-qiang, GAO Ke, WANG Wen-bin. Prevention of instability control of commercial vehicle based on electric-hydraulic coupling steering system [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1305-1312.
[7] SONG Da-feng, WU Xi-tao, ZENG Xiao-hua, YANG Nan-nan, LI Wen-yuan. Life cycle cost analysis of mild hybrid heavy truck based on theoretical fuel consumption model [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1313-1323.
[8] ZHU Jian-feng, ZHANG Jun-yuan, CHEN Xiao-kai, HONG Guang-hui, SONG Zheng-chao, CAO Jie. Design modification for automotive body structure based on seat pull safety performance [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1324-1330.
[9] NA Jing-xin, PU Lei-xin, FAN Yi-sa, SHEN Chuan-liang. Effect of temperature and humidity on the failure strength of Sikaflex-265 aluminum adhesive joints [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1331-1338.
[10] WANG Yan, GAO Qing, WANG Guo-hua, ZHANG Tian-shi, YUAN Meng. Simulation of mixed inner air-flow integrated thermal management with temperature uniformity of Li-ion battery [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1339-1348.
[11] JIN Li-sheng, XIE Xian-yi, GAO Lin-lin, GUO Bai-cang. Distributed electric vehicle stability control based on quadratic programming [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1349-1359.
[12] WANG De-jun, WEI Wei-li, BAO Ya-xin. Actuator fault diagnosis of ESC system considering crosswind interference [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1548-1555.
[13] HU Man-jiang, LUO Yu-gong, CHEN Long, LI Ke-qiang. Vehicle mass estimation based on longitudinal frequency response characteristics [J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
[14] LIU Guo-zheng, SHI Wen-ku, Chen Zhi-yong. Finite element analysis of transmission error for hypoid gears considering installation error [J]. 吉林大学学报(工学版), 2018, 48(4): 984-989.
[15] YU Liang, LI He-yan, MA Biao, LI Hui-zhu, LI Ming-yang. Analysis and verification for average axial pressure attenuation of multi-disc clutch [J]. 吉林大学学报(工学版), 2018, 48(4): 990-997.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] PENG Qi-yuan,XU Jin,ZHENG Sheng-bao,SHAO Yi-ming,DENG Tian-min. Effect of road pavement material change at tunnel entrance and exit on vehicle operation and optimization of transition location[J]. 吉林大学学报(工学版), 2009, 39(06): 1497 -1503 .
[2] WANG Xin,JIANG Ji-hai. Regenerative braking control strategy for wheel drive hydraulic hybrid vehicle[J]. 吉林大学学报(工学版), 2009, 39(06): 1544 -1549 .
[3] WU Jian,DONG Hui-juan,ZHANG Song-bai,ZHANG Guang-yu. Novel primary series matching scheme for piezoelectric ultrasonic transducer[J]. 吉林大学学报(工学版), 2009, 39(06): 1641 -1645 .
[4] ZHENG Wen-Zhong, WAN Fu-Xiong, LI Shi-Guang. Mechanical performance of reinforced concrete slabs strengthened with CFRP sheets bonded with an inorganic adhesive after fire[J]. 吉林大学学报(工学版), 2010, 40(05): 1244 -1249 .
[5] LIU Song-shan, WANG Qing-nian, WANG Wei-hua, LIN Xin. Influence of inertial mass on damping and amplitude-frequency characteristic of regenerative suspension[J]. 吉林大学学报(工学版), 2013, 43(03): 557 -563 .
[6] CHU Liang, WANG Yan-bo, QI Fu-wei, ZHANG Yong-sheng. Control method of inlet valves for brake pressure fine regulation[J]. 吉林大学学报(工学版), 2013, 43(03): 564 -570 .
[7] LI Jing, WANG Zi-han, YU Chun-xian, HAN Zuo-yue, SUN Bo-hua. Design of control system to follow vehicle state with HIL test beach[J]. 吉林大学学报(工学版), 2013, 43(03): 577 -583 .
[8] ZHU Jian-feng, LIN Yi, CHEN Xiao-kai, SHI Guo-biao. Structural topology optimization based design of automotive transmission housing structure[J]. 吉林大学学报(工学版), 2013, 43(03): 584 -589 .
[9] HU Xing-jun, LI Teng-fei, WANG Jing-yu, YANG Bo, GUO Peng, LIAO Lei. Numerical simulation of the influence of rear-end panels on the wake flow field of a heavy-duty truck[J]. 吉林大学学报(工学版), 2013, 43(03): 595 -601 .
[10] WANG Tong-jian, CHEN Jin-shi, ZHAO Feng, ZHAO Qing-bo, LIU Xin-hui, YUAN Hua-shan. Mechanical-hydraulic co-simulation and experiment of full hydraulic steering systems[J]. 吉林大学学报(工学版), 2013, 43(03): 607 -612 .