吉林大学学报(工学版) ›› 2014, Vol. 44 ›› Issue (2): 369-378.doi: 10.13229/j.cnki.jdxbgxb201402015
• paper • Previous Articles Next Articles
ZHANG Yao-juan1,2, CHENG Kai1, ZHOU Zhen-ping1, ZHENG Sen1, XU Xiao-long1, LIU Wei-wei1
CLC Number:
| [1] 杨广雪, 谢基龙, 李强, 等.过盈配合微动损伤的关键参数[J]. 机械工程学报, 2010, 46(16):53-59. Yang Guang-xue, Xie Ji-long, Li Qiang, et al. Key parameters of fretting damage under shrink fit[J]. Journal of Mechanical Engineering, 2010, 46(16):53-59.[2] 张松, 艾兴, 刘战强. 基于有限元的高速旋转主轴过盈配合研究[J]. 机械科学与技术, 2004(1):15-24. Zhang Song, Ai Xing, Liu Zhan-qiang. FEM-based study on interference fits in high speed rotatory spindles[J]. Mechanical Science and Technology, 2004(1):15-24.[3] 刘赟, 王浩, 黄明. 过盈接触式伸缩杆的动态特性[J]. 机械工程学报, 2012, 48(13):115-120. Liu Yun, Wang Hao, Huang Ming. Dynamic behavior of interference-contact expansion link[J]. Mechanical Science and Technology, 2012, 48(13):115-120.[4] 曾飞, 陈光雄, 周仲荣. 基于 ANSYS 的轮对过盈配合微动分析[J]. 机械工程学报, 2011, 47(5):121-125. Zeng Fei, Chen Guang-xiong, Zhou Zhong-rong. Fretting analysis of interference fitting of wheel-set based on ANSYS[J]. Journal of Mechanical Engineering, 2011, 47(5):121-125.[5] 陈启明, 黄文俊, 胡四兵, 等.鼓风机叶轮过盈配合的有限元数值仿真[J].机械设计与制造, 2010(8):21-23. Chen Qi-ming, Huang Wen-jun, Hu Si-bing, et al. Numerical simulation of finite element method for interference fit of blower impeller[J]. Machinery Design & Manufacture, 2010(8):21-23.[6] 周鹤群, 汪中厚, 谢云波, 等.基于FEA的传动轴过盈配合精密分析[J].机械传动, 2010, 34(1):60-65. Zhou He-qun, Wang Zhong-hou, Xie Yun-bo, et al. Precision analysis of interference fits for drive shaft based on FEA[J]. Journal of Mechanical Transmission, 2010, 34(1):60-65.[7] 曹付义, 周志立, 贾鸿社. 履带车辆转向性能计算机仿真研究概况[J].农业机械学报, 2007, 38(1):184-188. Cao Fu-yi, Zhou Zhi-li, Jia Hong-she. Research summarization on simulation of turning performance of tracked vehicle[J]. Transactions of the Chinese Social for Agricultural Machinery, 2007, 38(1):184-188.[8] Anh Tuan Le. Estimation of track-soil interactions for autonomous tracked vehicles[C]//International Conference on Robotics and Automation, New Mexico, 1997.[9] Yang Cong-bin, Gu Liang, Lv Wei-wei. Study of factors with effects on tracked vehicle driving resistance basis of Bekker theory[C]//ICAME, Jakarta, 2013.[10] Anh Tuan Le.Modelling and control of tracked vehicles.Sydney: the University of Sydney, 1999.[11] Arnulfo Luevanos Rojas. Method of structural analysis for statically indeterminate beams[J]. International Journal of Innovative Computing, Information and Control, 2012, 8(8):5473-5486.[12] Frederic L, Aurelian V, Bernard S. Finite element analysis and contact modelling considerations of interference fits for fretting fatigue strength calculations[J].Simulation Modeling Practice & Theory, 2009, 17(10):1587-1602. |
| [1] | JIA Tuo,ZHAO Ding-xuan,CUI Yu-xin. Method of rollover pre-warning for articulated loader [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1762-1769. |
| [2] | ZANG Peng-fei, WANG Zhe, SUN Chen-le, LIN Lian-lian. Scavenging process for stable operation of linear range-extende [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1455-1465. |
| [3] | LI Yin-wu, WU Qing-wen, CHANG Zhi-yong, YANG Cheng. Simulation and optimal design of backhoe hydraulic excavator based on bionic teeth [J]. 吉林大学学报(工学版), 2018, 48(3): 821-827. |
| [4] | LIU Han-guang, WANG Guo-qiang, MENG Dong-ge, ZHAO Huan-yu. Reasonable pre-tension research of crawler traveling gear of hydraulic excavator [J]. 吉林大学学报(工学版), 2018, 48(2): 486-491. |
| [5] | ZHA Shan-shan, GUO Yu, HUANG Shao-hua, FANG Wei-guang. Dynamic facility layout for workshop under uncertain product demands [J]. 吉林大学学报(工学版), 2017, 47(6): 1811-1821. |
| [6] | PENG Wei, LI Guo-xiang, YAN Wei. Improvement in wall functions for engine radiators [J]. 吉林大学学报(工学版), 2017, 47(3): 804-810. |
| [7] | TANG Zhi-gang, ZHANG Li, SHANG Hui-chao, LYU Xiao-hui, CHEN Xi, ZHENG Ren-wei. Combustion characteristics in glow-plug ignition miniature ICE and influence of residual gas [J]. 吉林大学学报(工学版), 2017, 47(3): 811-818. |
| [8] | DONG Chao, CHENG Kai, HU Kang-le, HU Wen-qiang. Pitching movement performance of all terrain articulated tracked vehicles [J]. 吉林大学学报(工学版), 2017, 47(3): 827-836. |
| [9] | HAN Lin-pei, HONG Wei, SU Yan, XIE Fang-xi, CHEN Jing, DU Wen-chang. Effect of GDI engine exhaust valve secondary open on refluent EGR stratification and combustion characteristics [J]. 吉林大学学报(工学版), 2017, 47(1): 113-121. |
| [10] | DONG Chao, CHENG Kai, HU Wen-qiang, OUYANG Bo, WU Bin. Steering performance analysis of articulated tracked vehicle considering soil shear deformation [J]. 吉林大学学报(工学版), 2016, 46(6): 1922-1932. |
| [11] | FU Jia-hong, YU Xiao-li, YAO Ling-yu, LIU Zhen-tao, HUANG Yu-qi. Numerical comparison of flow and heat transfer in detached cooling module for construction machinery [J]. 吉林大学学报(工学版), 2016, 46(2): 451-456. |
| [12] | QIU Qing-ying, WEI Zhen-kai, GAO Yu, FENG Pei-en, YIN Peng-long. Fatigue analysis method of working devices of hydraulic excavator [J]. 吉林大学学报(工学版), 2016, 46(1): 159-165. |
| [13] | TIAN Jing, LIU Zhong-chang, ZHANG Wen-jie, ZHANG Long-ping. Effect of load conditions on the performance of diesel engine under transient operation condition [J]. 吉林大学学报(工学版), 2015, 45(6): 1798-1803. |
| [14] | LUO Hai-tao, ZHOU Wei-jia, WANG Hong-guang, WU Jia-feng. Mechanical analysis of friction stir welding robot under typical working conditions [J]. 吉林大学学报(工学版), 2015, 45(3): 884-891. |
| [15] | GU Tian-qi, ZHANG Lei, JI Shi-jun, TAN Xiao-dan, HU Ming. Curve fitting method for closed discrete points [J]. 吉林大学学报(工学版), 2015, 45(2): 437-441. |
|