吉林大学学报(工学版) ›› 2016, Vol. 46 ›› Issue (3): 700-705.doi: 10.13229/j.cnki.jdxbgxb201603003

• Orginal Article • Previous Articles     Next Articles

Robustness optimization of divided steering linkage for electric vehicles based on 6σ design

SHI Tian-ze1, WANG Deng-feng1, CHEN Shu-ming1, DENG Zhao-xiang2, 3, DONG Hong-liang2, 3   

  1. 1.State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun 130022,China;
    2.China Automotive Engineering Research Institude Co.,Ltd., CAERI NVH Engineering R&D Center, Chongqing 401122, China;;
    3.China Automotive Engineering Research Institude Co.,Ltd.,State Key Laboratory of Vehicle NVH and Safety Control, Chongqing 401122, China
  • Received:2014-08-25 Online:2016-06-20 Published:2016-06-20

Abstract: A mathematical model of divided steering linkage for electric vehicles is built and validated. Aiming at minimizing the difference between Ackerman steering angle and the practical steering angle, a robust optimization method is proposed based on theory and Monte Carlo simulation. The constraints are deduced by the characteristics of the steering linkage. The influences of uncertain factors on the optimization results are analyzed. The results demonstrate that the optimal linkage has a better Ackerman performance, and the robust design shows better reliability against the uncertain factors.

Key words: vehicle engineering, electric vehicle, divided steering linkage, mathematical model, 6σ, robust design, ackerman angle

CLC Number: 

  • U463.45
[1] 姚明龙,王福林. 车辆转向梯形优化设计及其求解方法的研究[J]. 机械设计与制造,2007(5):24-26.
Yao Ming-long, Wang Fu-lin. The optimal design of steering trapezoidal mechanism of vehicle and the research of solution method[J]. Machinery Design & Manufacture,2007(5):24-26.
[2] 唐应时,朱彪,朱位宇,等. 基于响应面方法的转向梯形优化设计[J]. 中南大学学报:自然科学版,2012,43(7):2601-2606.
Tang Ying-shi, Zhu Biao, Zhu Wei-yu, et al. Optimization of ackerman steering lingkage based on RSM[J]. Journal of Central South University(Science and Technology),2012,43(7):2601-2606.
[3] Simionescu P A, Beale D. Optimum synthesis of the four-bar function generator in its symmetric embodiment: the Ackermann steering linkage[J]. Mechanism and Machine Theory,2002,37(12):1487-1504.
[4] Mántaras D A, Luque P, Vera C. Development and validation of a three-dimensional kinematic model for the McPherson steering and suspension mechanisms[J]. Mechanism and Machine Theory,2004,39(6):603-619.
[5] Hanzaki A R, Rao P V M, Saha S K. Kinematic and sensitivity analysis and optimization of planar rack-and-pinion steering linkages[J]. Mechanism and Machine Theory,2009,44(1):42-56.
[6] 黄金陵,崔岸,陈晓华,等.稳健设计方法用于车门系统设计[J]. 汽车工程,2006,28(11):1011-1014.
Huang Jin-ling, Cui An, Chen Xiao-hua, et al. Robust design of automotive door system[J]. Automotive Engineering,2006,28(11):1011-1014.
[7] 高伟钊,莫旭辉,付锐,等. 基于Kriging的泡沫填充锥形薄壁结构耐撞性6 σ 稳健性优化设计[J]. 固体力学学报,2012,33(4):370-378.
Gao Wei-zhao, Mo Xu-hui, Fu Rui, et al. 6 σ robustness optimization design of the crashworthiness for foam-filled tapered thin-walled structure based on kriging method[J]. Chinese Journal of Solid Mechanics,2012,33(4):370-378.
[8] 莫旭辉,赵宇航,钟志华,等. 基于6 σ 稳健性方法的汽车行驶平顺性优化[J]. 中南大学学报:自然科学版,2012,43(11):4286-4292.
Mo Xu-hui,Zhao Yu-hang, Zhong Zhi-hua, et al. Robustness optimization of ride comfort for vehicle based on 6 σ method[J]. Journal of Central South University (Science and Technology), 2012,43(11):4286-4292.
[9] Durstine J. The truck steering system from hand wheel to road wheel[C]∥SAE Technical Paper,1973,730039.
[10] 刘汪洋,宋小文,王晓晖. 断开式转向梯形机构的稳健优化设计模型[J]. 机电工程,2011,28(4):429-431,443.
Liu Wang-yang, Song Xiao-wen, Wang Xiao-hui. Robust design model of vehicle divided steering linkage[J]. Journal of Mechanical & Electrical Engineering,2011,28(4):429-431,443.
[11] 孟宪举,张策,师忠秀,等. 连杆机构稳健性优化设计[J]. 机械设计,2004,21(6):31-33.
Meng Xian-ju, Zhang Ce, Shi Zhong-xiu, et al. Optimization design for robustness of linkages[J]. Journal of Machine Design,2004,21(6):31-33.
[1] CHANG Cheng,SONG Chuan-xue,ZHANG Ya-ge,SHAO Yu-long,ZHOU Fang. Minimizing inverter capacity of doubly-fed machine driving electric vehicles [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1629-1635.
[2] XI Li-he,ZHANG Xin,SUN Chuan-yang,WANG Ze-xing,JIANG Tao. Adaptive energy management strategy for extended range electric vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1636-1644.
[3] HE Ren,YANG Liu,HU Dong-hai. Design and analysis of refrigeration system supplied by solar auxiliary power of refrigerator car [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1645-1652.
[4] NA Jing-xin,MU Wen-long,FAN Yi-sa,TAN Wei,YANG Jia-zhou. Effect of hygrothermal aging on steel-aluminum adhesive joints for automotive applications [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1653-1660.
[5] LIU Yu-mei,LIU Li,CAO Xiao-ning,XIONG Ming-ye,ZHUANG Jiao-jiao. Construction on collision avoidance model of bogie dynamic simulation test bench [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1661-1668.
[6] ZHAO Wei-qiang, GAO Ke, WANG Wen-bin. Prevention of instability control of commercial vehicle based on electric-hydraulic coupling steering system [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1305-1312.
[7] NA Jing-xin, PU Lei-xin, FAN Yi-sa, SHEN Chuan-liang. Effect of temperature and humidity on the failure strength of Sikaflex-265 aluminum adhesive joints [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1331-1338.
[8] WANG Yan, GAO Qing, WANG Guo-hua, ZHANG Tian-shi, YUAN Meng. Simulation of mixed inner air-flow integrated thermal management with temperature uniformity of Li-ion battery [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1339-1348.
[9] KUI Hai-lin, BAO Cui-zhu, LI Hong-xue, LI Ming-da. Idling time prediction method based on least square support vector machine [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1360-1365.
[10] SONG Da-feng, WU Xi-tao, ZENG Xiao-hua, YANG Nan-nan, LI Wen-yuan. Life cycle cost analysis of mild hybrid heavy truck based on theoretical fuel consumption model [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1313-1323.
[11] ZHU Jian-feng, ZHANG Jun-yuan, CHEN Xiao-kai, HONG Guang-hui, SONG Zheng-chao, CAO Jie. Design modification for automotive body structure based on seat pull safety performance [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1324-1330.
[12] JIN Li-sheng, XIE Xian-yi, GAO Lin-lin, GUO Bai-cang. Distributed electric vehicle stability control based on quadratic programming [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1349-1359.
[13] WANG De-jun, WEI Wei-li, BAO Ya-xin. Actuator fault diagnosis of ESC system considering crosswind interference [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1548-1555.
[14] HU Man-jiang, LUO Yu-gong, CHEN Long, LI Ke-qiang. Vehicle mass estimation based on longitudinal frequency response characteristics [J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
[15] ZHANG Man, SHI Shu-ming. Analysis of state transition characteristics for typical vehicle driving cycles [J]. 吉林大学学报(工学版), 2018, 48(4): 1008-1015.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] ZHU Jian-feng, LIN Yi, CHEN Xiao-kai, SHI Guo-biao. Structural topology optimization based design of automotive transmission housing structure[J]. 吉林大学学报(工学版), 2013, 43(03): 584 -589 .
[2] ZHOU Feng-dao, WANG Jin-yu, TANG Hong-zhong, ZHANG He, ZHOU Ji-yu. Multi-frequency digital drive signal generation technology in near surface electromagnetic detection domain[J]. 吉林大学学报(工学版), 2013, 43(03): 682 -687 .
[3] OUYANG Ji-hong, WANG Zhen-xin, JING Li. Expanding 9-intersection model with metric relations[J]. 吉林大学学报(工学版), 2013, 43(03): 695 -700 .
[4] GUO Tie-liang, ZHAO Dan-feng, YANG Da-wei. Efficient Doppler estimation for UWA OFDM systems[J]. 吉林大学学报(工学版), 2013, 43(03): 813 -818 .
[5] HE Yao, LIU Xing-tao, ZHANG Chen-bin, CHEN Zong-hai. Insulation detection algorithm for high-power battery system based on internal resistance model[J]. 吉林大学学报(工学版), 2013, 43(05): 1165 -1170 .
[6] LI Zhi-bin, JIN Mao-jing, LIU Pan, XU Cheng-cheng. Evaluation of impact variable speed limits on improving traffic efficiency on freeways[J]. 吉林大学学报(工学版), 2013, 43(05): 1204 -1209 .
[7] YUAN Zhe, MA Wen-xing, LIU Chun-bao, LIU Hao. Temperature field analysis of the open-type hydrodynamic retarder of heavy vehicle[J]. 吉林大学学报(工学版), 2013, 43(05): 1271 -1275 .
[8] SUI Zhou, CAI Zhong-yi, LAN Ying-wu, LI Ming-zhe. Shape control model for three-dimensional surface part in continuous flexible forming process[J]. 吉林大学学报(工学版), 2013, 43(05): 1302 -1306 .
[9] YANG Xiao-jun, SONG Qing-song, MA Xiang, LI Dong-hai. Fault-tolerance target tracking based on multi-model information filtering[J]. 吉林大学学报(工学版), 2013, 43(05): 1381 -1385 .
[10] WU Wen, MENG Xiang-ru, LIU Yun-jiang, HUO Xing-lin. Modeling and quantification of network survivability based on continuous time Markov[J]. 吉林大学学报(工学版), 2013, 43(05): 1395 -1400 .