吉林大学学报(工学版) ›› 2017, Vol. 47 ›› Issue (1): 145-150.doi: 10.13229/j.cnki.jdxbgxb201701021

• Orginal Article • Previous Articles     Next Articles

Temperature-related dynamic characteristics of MEMS setback arming device

HE Guang, ZHANG Ming, YUAN Shuang-shi   

  1. National Key Laboratory on Electromechanical Dynamic Control,Beijing Institute of Technology, Beijing 100081, China
  • Received:2016-02-20 Online:2017-01-20 Published:2017-01-20

RICH HTML

0   

PDF (PC)

347

Abstract: A structure's temperature-related dynamic testing system of a Micro-electromechanical System (MEMS) was built. This testing system consists of high impact loading system, temperature loading system and high-speed photography system. Using this system, the dynamic characteristics of fuse MEMS setback arming device was tested under temperature and impact load coupled environment. The relative displacement-time curve and velocity-time curve between slider and baseplate of the MEMS setback arming device were obtained at different temperatures (-40 ℃~ 50 ℃). Through the comparative analysis of the curves, the effect of the temperature on the relative displacement and velocity between the slider and baseplate of the MEMS setback arming device under impact load condition was obtained.

Key words: mechanical design, micro-electro mechanical system(MEMS), image processing, dynamic characteristics, setback arming device

CLC Number: 

  • TH39
[1] 何光. 基于MEMS技术的微机械保险机构基础理论及应用研究[D]. 北京:北京理工大学机电学院,2006.
He Guang. Research on fundamentals and applications of MEMS-based safety and arming device for small-caliber munition fuzes[D]. Beijing: School of Mechatronical Engineering, Beijing Institute of Technology, 2006.
[2] 何彬. 微拉伸实验装置的研制及微构件力学特性评价[D]. 哈尔滨: 哈尔滨工业大学机电学院, 2011.
He Bin. Tensile experiment equipment for micro structure and assessment on mechanics properties of micro structure[D] . Harbin: School of Mechatronical Engineering, Harbin Institute of Technology, 2011.
[3] 李晓轲. 高温环境下MEMS微构件动态特性测试技术研究[D]. 大连:大连理工大学机械工程学院,2009.
Li Xiao-ke. The study of dynamic characteristic testing technology of MEMS microstructure in high temperature[D]. Dalian: School of Mechanical Engineering, Dalian University of Technology, 2009.
[4] 王亚军. 复杂环境下的典型MEMS材料及结构动态力学特性研究[D].北京:北京理工大学机电学院,2012.
Wang Ya-jun. On the dynamic mechanical characteristics of typical MEMS material and structure in complex environment[D]. Beijing: School of Mechatronical Engineering, Beijing Institute of Technology, 2012.
[5] He Guang, Shi Geng-chen. On the mechanical behavior of LIGA nickel[C]∥The 4th IEEE International Conference on Nano/Micro Engineered and Molecular Systems,Shenzhen, 2009: 758-762.
[6] 北京工业学院触发引信教研室. 引信设计[M]. 北京:北京工业大学出版社,1976.
[7] 韩雪梅. 引信典型MEMS结构失效机理研究[D]. 北京: 北京理工大学机电学院, 2009.
Han Xue-mei. Failure mechanism of fuze typical MEMS structure[D]. Beijing: School of Mechatronical Engineering, Beijing Institute of Technology,2009.
[8] 景华,牛兰杰,宋永强. 小口径榴弹引信微机电安全系统设计与仿真方法[J]. 弹箭与制导学报, 2010,30(2):129-133.
Jing Hua, Niu Lan-jie, Song Yong-qiang. The method of design and simulation of MEMS S&AD for fuse in small-caliber grenade[J]. Journal of Projectiles, Rochets, Missiles and Guidance, 2010,30(2):129-133.
[9] 王晓霞, 牛兰杰, 赵旭. 火箭弹引信MEMS后坐保险机构[J]. 科学技术与工程, 2011, 11(11):2479-2482.
Wang Xiao-xia, Niu Lan-jie, Zhao Xu. MEMS setback arming device for rocket fuze[J]. Science Technology and Engineering, 2011, 11(11):2479-2482.
[10] 李华. 基于MEMS技术的子弹引信安全系统研究[D]. 北京: 北京理工大学机电学院, 2007.
Li Hua. Research on the MEMS-based safety and arming device of submunition fuze[D]. Beijing: School of Mechatronical Engineering, Beijing Institute of Technology, 2007.
[11] 张继桃. 基于MEMS的安全解除保险机构的设计与试验研究[D]. 沈阳: 沈阳理工大学机械工程学院, 2012.
Zhang Ji-tao. The design and test on safety and arming device based on MEMS[D]. Shenyang: School of Mechanical Engineering, Shenyang Ligong University, 2012.
[12] 马文睿. 复杂环境下典型MEMS构件动态响应仿真方法[D]. 北京: 北京理工大学机电学院, 2014.
Ma Wen-rui. Simulation method on the dynamic response of typical MEMS components under complex environment[D]. Beijing: School of Mechanical Engineering, Beijing Institute of Technology,2014.
[13] 陈武凡,鲁贤庆, 陈建军,等. 彩色图像边缘检测的新算法——广义模糊算子法[J]. 中国科学: A辑, 1995,38(2):219-224.
Chen Wu-fan, Lu Xian-qing, Chen Jian-jun, et al. A new algorithm of color image edge detection-the generalized fuzzy operator method[J]. Science in China(Series A), 1995,38(2):219-224.
[14] 朱虹. 数字图像处理基础[M]. 北京: 科学出版社, 2005.
[1] BI Qiu-shi,WANG Guo-qiang,HUANG Ting-ting,MAO Rui,LU Yan-peng. Tooth strength analysis of mineral sizer by coupling discrete element method and finite element method [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1770-1776.
[2] ZHU Wei,WANG Chuan-wei,GU Kai-rong,SHEN Hui-ping,XU Ke,WANG Yuan. Stiffness and dynamics analysis of a new type of tensegrity parallel mechanism [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1777-1786.
[3] WANG Yan, GAO Qing, WANG Guo-hua, ZHANG Tian-shi, YUAN Meng. Simulation of mixed inner air-flow integrated thermal management with temperature uniformity of Li-ion battery [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1339-1348.
[4] LIU Jian-fang, WANG Ji-bo, LIU Guo-jun, LI Xin-bo, LIANG Shi-hai, YANG Zhi-gang. PMMA micromixer embedded with 3D channel based on piezoelectric actuation [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1500-1507.
[5] LIU Zhe, XU Tao, SONG Yu-qing, XU Chun-yan. Image fusion technology based on NSCT and robust principal component analysis model with similar information [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1614-1620.
[6] CHE Xiang-jiu, WANG Li, GUO Xiao-xin. Improved boundary detection based on multi-scale cues fusion [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1621-1628.
[7] WANG Tao, SAN Xiao-gang, GAO Shi-jie, WANG Hui-xian, WANG Jing, NI Ying-xue. Dynamic characteristics of vertical shaft system of photoelectric turntable [J]. 吉林大学学报(工学版), 2018, 48(4): 1099-1105.
[8] HE Ji-lin, CHEN Yi-long, WU Kang, ZHAO Yu-ming, WANG Zhi-jie, CHEN Zhi-wei. Energy flow analysis of crane hoisting system and experiment of potential energy recovery system [J]. 吉林大学学报(工学版), 2018, 48(4): 1106-1113.
[9] XIE Chuan-liu, TANG Fang-ping, SUN Dan-dan, ZHANG Wen-peng, XIA Ye, DUAN Xiao-hui. Model experimental analysis of pressure pulsation in vertical mixed-flow pump system [J]. 吉林大学学报(工学版), 2018, 48(4): 1114-1123.
[10] SUN Xiu-rong, DONG Shi-min, WANG Hong-bo, LI Wei-cheng, SUN Liang. Comparison of multistage simulation models of entire sucker rod with spatial buckling in tubing [J]. 吉林大学学报(工学版), 2018, 48(4): 1124-1132.
[11] YOSHINO Tatsuo, FAN Lu-lu, YAN Lei, XU Tao, LIN Ye, GUO Gui-kai. Multiobjective optimization design for dummy chest structure based on MBNWS algorithm [J]. 吉林大学学报(工学版), 2018, 48(4): 1133-1139.
[12] LIU Kun, LIU Yong, YAN Jian-chao, JI Shuo, SUN Zhen-yuan, XU Hong-wei. Dynamic analysis of sit-to-stand human motion based on in vitro-sensor detection [J]. 吉林大学学报(工学版), 2018, 48(4): 1140-1146.
[13] LIU Zhi-feng, ZHAO Dai-hong, WANG Yu-mo, HUN Lian-ming, ZHAO Yong-sheng, DONG Xiang-min. Relationship between bearing capacity of heavy machine hydrostatic rotary table and temperature field distribution of oil pad [J]. 吉林大学学报(工学版), 2018, 48(3): 773-780.
[14] CAO Jing-hua, KONG Fan-sen, RAN Yan-zhong, SONG Rui-chen. Back pressure controller design of air compressor based on fuzzy self-adaptive PID control [J]. 吉林大学学报(工学版), 2018, 48(3): 781-786.
[15] LI Rui, ZHANG Lu-yang, LIU Lin, WU Yue-yuan, CHEN Shi-wei. Magneto-rheological vibration isolation for three-span bridge based on similarity theory [J]. 吉林大学学报(工学版), 2018, 48(3): 787-795.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd