吉林大学学报(工学版) ›› 2017, Vol. 47 ›› Issue (6): 1791-1795.doi: 10.13229/j.cnki.jdxbgxb201706016

• Orginal Article • Previous Articles     Next Articles

Modeling of bearing capacity of fixed hydrostatic turntable considering centrifugal force

LIU Zhi-feng1, HUN Lian-ming1, YIN Ya-wen1, WANG Jian-hua1, LUO Zong-lan1, DONG Xiang-min2   

  1. 1.Beijing Key Laboratory of Advanced Manufacturing Technology, Beijing University of Technology, Beijing 100124,China;
    2.Department of Mechanical Engineering, Chengde Petroleum College,Chengde 067000, China
  • Received:2016-07-08 Online:2017-11-20 Published:2017-11-20

RICH HTML

0   

PDF (PC)

82

Abstract: The quantitative sector fan-shaped oil pad bearing capacity calculation does not take into account the effect of centrifugal force, and the traditional calculation method lacks experimental verification. To solve this problem, first, the bearing capacity model of the fan-shaped static bearing oil pad is derived, in which the centrifugal force is considered. Then the overall dynamic model of the turntable is established. The hydrostatic turntable experiment scheme is designed, and experiments are carried out. The experiment results are basically in agreement with theoretical calculation results that the error is within reasonable range, which verifies the feasibility of the model and the overall kinetic equation for the calculation of the bearing capacity of the fan-shaped oil pad considering of the centrifugal force. The model and the analysis conclusion of this work may provide theoretical support for practical production and the service performance of the turntable.

Key words: mechanical design, mechanical driver, fan-shaped oil pad, bearing capacity, centrifugal force

CLC Number: 

  • TH137
[1] 陈燕生. 液体静压支承原理和设计[M]. 北京:国防业出版社,1980:273-276.
[2] 刘震北. 静压推力轴承惯性效应分析[J]. 现代机械,1991(4):6-10.
Liu Zhen-bei. Analysis of the bearing inertial effect[J]. Morden Machinery,1991(4):6-10.
[3] 于晓东,邱志新,李欢欢,等. 扇形腔多油垫静压推力轴承润滑性能速度特性[J]. 热能动力工程,2013,28(3):296-300.
Yu Xiao-dong,Qiu Zhi-xin,Li Huan-huan,et al. Lubrication performance and speed characteristics of the hydrostatic thrust bearing with a fan shaped cavity[J]. Journal of Engineering for Thermal Energy and Power,2013,28(3):296-300.
[4] 叶红玲,郑小龙,沈静娴,等. 液体静压导轨转台轴向振动的动力学建模与分析[J]. 工程力学,2012,29(3):218-225.
Ye Hong-ling,Zheng Xiao-long,Shen Jing-xian. Dynamic modeling and analysis of the axial vibration of the hydrostatic slide table[J]. Engineering Mechanics,2012,29(3):218-225.
[5] 刘志峰,湛承鹏,赵永胜,等. 定量式静压转台动态特性建模与影响因素分析[J]. 机械工程学报,2015,51(19):75-83.
Liu Zhi-feng, Zhan Cheng-peng, Zhao Yong-sheng, et al. Modeling and analysis of the dynamic behaviors of a quantitative type hydrostatic rotary table[J]. Journal of Mechanical Engineering,2015,51(19):75-83.
[6] Garratt J E,Hibberd S,Cliffe K A, et al. Centrifugal inertia effects in high-speed hydrostatic air thrust bearings[J]. Engineering Mathematics,2012,76(1):59-80.
[7] Prabhu T J,Ganesan N. Effects of tilt on the characteristics of multirecess hydrostatic thrust bearings under conditions of no rotations[J]. Wear,1983,92(2):269-277.
[8] Srinivasan V. Analysis of static and dynamic load on hydrostatic bearing with variable viscosity and pressure[J]. Indian Journal of Science and Technology,2013,6(Sup.):4777-4782.
[9] Kozdora M, Drabkova S. Numerical modelling of the flow in the annular muti-recess hydrostatic thrust bearing using CFD methods[J]. EDP Sciences,2013,45:1-6.
[1] BI Qiu-shi,WANG Guo-qiang,HUANG Ting-ting,MAO Rui,LU Yan-peng. Tooth strength analysis of mineral sizer by coupling discrete element method and finite element method [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1770-1776.
[2] ZHU Wei,WANG Chuan-wei,GU Kai-rong,SHEN Hui-ping,XU Ke,WANG Yuan. Stiffness and dynamics analysis of a new type of tensegrity parallel mechanism [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1777-1786.
[3] LIU Jian-fang, WANG Ji-bo, LIU Guo-jun, LI Xin-bo, LIANG Shi-hai, YANG Zhi-gang. PMMA micromixer embedded with 3D channel based on piezoelectric actuation [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1500-1507.
[4] WANG Tao, SAN Xiao-gang, GAO Shi-jie, WANG Hui-xian, WANG Jing, NI Ying-xue. Dynamic characteristics of vertical shaft system of photoelectric turntable [J]. 吉林大学学报(工学版), 2018, 48(4): 1099-1105.
[5] HE Ji-lin, CHEN Yi-long, WU Kang, ZHAO Yu-ming, WANG Zhi-jie, CHEN Zhi-wei. Energy flow analysis of crane hoisting system and experiment of potential energy recovery system [J]. 吉林大学学报(工学版), 2018, 48(4): 1106-1113.
[6] XIE Chuan-liu, TANG Fang-ping, SUN Dan-dan, ZHANG Wen-peng, XIA Ye, DUAN Xiao-hui. Model experimental analysis of pressure pulsation in vertical mixed-flow pump system [J]. 吉林大学学报(工学版), 2018, 48(4): 1114-1123.
[7] SUN Xiu-rong, DONG Shi-min, WANG Hong-bo, LI Wei-cheng, SUN Liang. Comparison of multistage simulation models of entire sucker rod with spatial buckling in tubing [J]. 吉林大学学报(工学版), 2018, 48(4): 1124-1132.
[8] YOSHINO Tatsuo, FAN Lu-lu, YAN Lei, XU Tao, LIN Ye, GUO Gui-kai. Multiobjective optimization design for dummy chest structure based on MBNWS algorithm [J]. 吉林大学学报(工学版), 2018, 48(4): 1133-1139.
[9] LIU Kun, LIU Yong, YAN Jian-chao, JI Shuo, SUN Zhen-yuan, XU Hong-wei. Dynamic analysis of sit-to-stand human motion based on in vitro-sensor detection [J]. 吉林大学学报(工学版), 2018, 48(4): 1140-1146.
[10] LIU Zhi-feng, ZHAO Dai-hong, WANG Yu-mo, HUN Lian-ming, ZHAO Yong-sheng, DONG Xiang-min. Relationship between bearing capacity of heavy machine hydrostatic rotary table and temperature field distribution of oil pad [J]. 吉林大学学报(工学版), 2018, 48(3): 773-780.
[11] CAO Jing-hua, KONG Fan-sen, RAN Yan-zhong, SONG Rui-chen. Back pressure controller design of air compressor based on fuzzy self-adaptive PID control [J]. 吉林大学学报(工学版), 2018, 48(3): 781-786.
[12] LI Rui, ZHANG Lu-yang, LIU Lin, WU Yue-yuan, CHEN Shi-wei. Magneto-rheological vibration isolation for three-span bridge based on similarity theory [J]. 吉林大学学报(工学版), 2018, 48(3): 787-795.
[13] CHEN Zhong-min, HOU Li, DUAN Yang, ZHANG Qi, YANG Zhong-xue, JIANG Yi-qiang. Vibration analysis of a new pin-cycloid speed reducer [J]. 吉林大学学报(工学版), 2018, 48(1): 174-185.
[14] LIU Nian, XU Tao, XU Tian-shuang, HU Xian-lei, LIU Wei-hai. Lightweight design of TRB dashboard cross beam [J]. 吉林大学学报(工学版), 2018, 48(1): 199-204.
[15] LI Jia-qi, NI Ji-min, GAO Xu-nan, SHI Xiu-yong, XU Xiao-chuan. Analysis of lubrication performance of floating ring bearing considering radial temperature gradient [J]. 吉林大学学报(工学版), 2017, 47(6): 1782-1790.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd