吉林大学学报(工学版) ›› 2018, Vol. 48 ›› Issue (2): 387-397.doi: 10.13229/j.cnki.jdxbgxb20161252

Previous Articles     Next Articles

Construction of power battery liquid cooling system for electric vehicle and simulation of its working process

ZHANG Tian-shi1, 2, SONG Dong-jian2, GAO Qing1, 2, WANG Guo-hua1, 2, YAN Zhen-min2, SONG Wei1, 2   

  1. 1.State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun 130022,China;
    2.College of Automotive Engineering, Jilin University, Changchun 130022, China
  • Online:2018-03-01 Published:2018-03-01

RICH HTML

0   

PDF (PC)

881

Abstract: To ensure better operation temperature of the battery pack for electric vehicle, a battery cooling system with heat pump was proposed, and the model and the system were built on MATLAB using theoretical and experimental description method. The numerical simulation results show that the proposed system can effectively meet the battery cooling requirement at high temperature and high working load, and the heat pump has obvious auxiliary cooling effect. If the battery radiator is placed in front of the condenser the cooling effect is better than that the battery radiator is placed behind the condenser. In addition, the impact of the liquid flow rate is more obvious than the rotational speed of the fan in the dynamic cooling process. Therefore, the pump should serve as the main regulation factor in the battery cooling process, especially under high temperature and high load conditions.

Key words: vehicle engineering, electric vehicle, battery cooling, assisted by heat pump, model building, simulating calculation

CLC Number: 

  • U469
[1] Kizilel R, Sabbah R, Selman J R, et al. An alternative cooling system to enhance the safety of Li-ion battery packs[J]. Journal of Power Sources, 2009, 194(2):1105-1112.
[2] Kawamura T, Kimura A,Egashira M, et al. Thermal stability of alkyl carbonate mixed-solvent electrolytes for lithium ion cells[J]. Journal of Power Sources, 2002, 104(2):260-264.
[3] 秦大同, 梁昌杰, 杨亚联,等. 混合动力汽车用镍氢电池组散热性能仿真与试验[J]. 中国公路学报, 2010, 23(5):107-112.
Qin Da-tong, Liang Chang-jie, Yang Ya-lian, et al.Simulation and experiment on heat dissipation property of nickel-metal hydride battery package in hybride electric vehicle [J]. China Journal of Highway and Transport, 2010, 23(5): 107-112.
[4] 王庆年, 段本明, 王鹏宇,等. 插电式混合动力汽车动力传动系参数优化[J]. 吉林大学学报:工学版, 2017, 47(1):1-7.
Wang Qing-nian, Duan Ben-ming, Wang Peng-yu,et al.Optimization of powertrain transmission parameters of plug-in hybrid electric vehicle[J]. Journal of Jilin University(Engineering and Technology Edition), 2017, 47(1):1-7.
[5] Shahidinejad S, Bibeau E, Filizadeh S. Design and simulation of a thermal management system for plug-in electric vehicles in cold climates[C]∥ SAE Paper,2012-01-0118.
[6] Nelson P, Dees D, Amine K, et al. Modeling thermal management of lithium-ion PNGV batteries[J]. Journal of Power Sources, 2002, 110(2):349-356.
[7] Wu M S, Liu K H, Wang Y Y, et al. Heat dissipation design for lithium-ion batteries[J]. Journal of Power Sources, 2002, 109(1):160-166.
[8] Chen D, Jiang J, Kim G H, et al. Comparison of different cooling methods for lithium ion battery cells[J]. Applied Thermal Engineering,2016, 94:846-854.
[9] Hosoz M, Direk M. Performance evaluation of an integrated automotive air conditioning and heat pump system[J]. Energy Conversion & Management, 2006, 47(5):545-559.
[10] Zhang T, Gao C, Gao Q, et al. Status and development of electric vehicle integrated thermal management from BTM to HVAC[J]. Applied Thermal Engineering, 2015, 88:398-409.
[11] Pendergast D R, Demauro E P, Fletcher M, et al. A rechargeable lithium-ion battery module for underwater use[J]. Journal of Power Sources, 2011, 196(2):793-800.
[12] Lee K H, Cha H R, Kim Y B. Development of an interior permanent magnet motor through rotor cooling for electric vehicles[J]. Applied Thermal Engineering, 2016, 95:348-356.
[13] Jarrett A, Kim I Y. Design optimization of electric vehicle battery cooling plates for thermal performance[J]. Journal of Power Sources, 2011, 196(23):10359-10368.
[14] Bernardi D, Pawlikowski E, Newman J. A general energy balance for battery systems[J]. Journal of the Electrochemical Society, 1984, 132(1):5-12.
[15] 许超.混合动力客车电池包散热系统研究[D].上海:上海交通大学车辆工程系,2010.
Xu Chao. Research of cooling system of battery pack on hybrid electric bus[D]. Shanghai: Department of Vehicle Engineering, Shanghai Jiaotong University, 2010.
[16] Sato N. Thermal behavior analysis of lithium-ion batteries for electric and hybrid vehicles[J]. Journal of Power Sources, 2000, 99(1/2):70-77.
[17] 余志生.汽车理论[M].北京:机械工业出版社, 2006.
[18] Cowell T A,Heikal M R, Achaichia A. Flow and heat transfer in compact louvered fin surfaces[J]. Experimental Thermal & Fluid Science, 1995, 10(2):192-199.
[19] Mujumdar P A. Handbook of single-phase convective heat transfer[J]. Drying Technology, 1987, 7(1):149-150.
[20] Park C,Jaura A K. Dynamic thermal model of Li-ion battery for predictive behavior in hybrid and fuel cell vehicles[J]. SAE Transactions, 2003, 112:1835-1842.
[21] Mahamud R, Park C. Reciprocating air flow for Li-ion battery thermal management to improve temperature uniformity[J]. Journal of Power Sources, 2011, 196(13):5685-5696.
[22] Hsieh Y Y, Lin T F. Saturated flow boiling heat transfer and pressure drop of refrigerant R-410A in a vertical plate heat exchanger[J]. International Journal of Heat & Mass Transfer, 2002, 45(5):1033-1044.
[23] Yan Y Y, Lin T F, Yang B C. Evaporation heat transfer and pressure drop of refrigerant R134a in a plate heat exchanger[C]∥ ASME 1997 Turbo Asia Conference, Singapore,1997:V001T13A024-V001 T13A024.
[1] CHANG Cheng,SONG Chuan-xue,ZHANG Ya-ge,SHAO Yu-long,ZHOU Fang. Minimizing inverter capacity of doubly-fed machine driving electric vehicles [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1629-1635.
[2] XI Li-he,ZHANG Xin,SUN Chuan-yang,WANG Ze-xing,JIANG Tao. Adaptive energy management strategy for extended range electric vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1636-1644.
[3] HE Ren,YANG Liu,HU Dong-hai. Design and analysis of refrigeration system supplied by solar auxiliary power of refrigerator car [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1645-1652.
[4] NA Jing-xin,MU Wen-long,FAN Yi-sa,TAN Wei,YANG Jia-zhou. Effect of hygrothermal aging on steel-aluminum adhesive joints for automotive applications [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1653-1660.
[5] LIU Yu-mei,LIU Li,CAO Xiao-ning,XIONG Ming-ye,ZHUANG Jiao-jiao. Construction on collision avoidance model of bogie dynamic simulation test bench [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1661-1668.
[6] ZHAO Wei-qiang, GAO Ke, WANG Wen-bin. Prevention of instability control of commercial vehicle based on electric-hydraulic coupling steering system [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1305-1312.
[7] SONG Da-feng, WU Xi-tao, ZENG Xiao-hua, YANG Nan-nan, LI Wen-yuan. Life cycle cost analysis of mild hybrid heavy truck based on theoretical fuel consumption model [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1313-1323.
[8] ZHU Jian-feng, ZHANG Jun-yuan, CHEN Xiao-kai, HONG Guang-hui, SONG Zheng-chao, CAO Jie. Design modification for automotive body structure based on seat pull safety performance [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1324-1330.
[9] NA Jing-xin, PU Lei-xin, FAN Yi-sa, SHEN Chuan-liang. Effect of temperature and humidity on the failure strength of Sikaflex-265 aluminum adhesive joints [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1331-1338.
[10] WANG Yan, GAO Qing, WANG Guo-hua, ZHANG Tian-shi, YUAN Meng. Simulation of mixed inner air-flow integrated thermal management with temperature uniformity of Li-ion battery [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1339-1348.
[11] JIN Li-sheng, XIE Xian-yi, GAO Lin-lin, GUO Bai-cang. Distributed electric vehicle stability control based on quadratic programming [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1349-1359.
[12] KUI Hai-lin, BAO Cui-zhu, LI Hong-xue, LI Ming-da. Idling time prediction method based on least square support vector machine [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1360-1365.
[13] WANG De-jun, WEI Wei-li, BAO Ya-xin. Actuator fault diagnosis of ESC system considering crosswind interference [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1548-1555.
[14] HU Man-jiang, LUO Yu-gong, CHEN Long, LI Ke-qiang. Vehicle mass estimation based on longitudinal frequency response characteristics [J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
[15] LIU Guo-zheng, SHI Wen-ku, Chen Zhi-yong. Finite element analysis of transmission error for hypoid gears considering installation error [J]. 吉林大学学报(工学版), 2018, 48(4): 984-989.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] WANG Wen-quan, SHANG Yan-geng, LI Xiu-juan, WANG Chun-sheng, ZHANG Gui-lan. Microstructure and property of laser welded 650 MPa transformation induced plasticity steel sheet[J]. , 2012, 42(05): 1203 -1207 .
[2] HUANG Jian-kang, HE Cui-cui, SHI Yu, FAN Ding. Thermodynamic analysis of Al-Fe intermetallic compounds formed by dissimilar joining of aluminum and galvanized steel[J]. 吉林大学学报(工学版), 2014, 44(4): 1037 -1041 .
[3] XU Tao, LIU Guang-jie, GE Hai-chao, ZHANG Wei, YU Zheng-lei. Modeling heat source of dynamic welding with local coordinate curve path[J]. 吉林大学学报(工学版), 2014, 44(6): 1704 -1709 .
[4] LUO Hai-tao, ZHOU Wei-jia, WANG Hong-guang, WU Jia-feng. Mechanical analysis of friction stir welding robot under typical working conditions[J]. 吉林大学学报(工学版), 2015, 45(3): 884 -891 .
[5] YANG Yue, ZHOU Lei-lei. Effect of micro-arc oxidation treatment on corrosion resistance of aluminum friction stir welding welds[J]. 吉林大学学报(工学版), 2016, 46(2): 511 -515 .
[6] LI Yi, LIANG Ji-cai, TENG Fei, LIANG Ce, YU Jia-qi. Multi-phase iterative compensation method of die shape optimization for multi-point stretch bending profile[J]. 吉林大学学报(工学版), 2016, 46(6): 1961 -1966 .
[7] LI Ming-da, KUI Hai-lin, MEN Yu-zhuo, BAO Cui-zhu. Aerodynamic drag of heavy duty vehicle with complex underbody structure[J]. 吉林大学学报(工学版), 2017, 47(3): 731 -736 .
[8] PENG Wei, LI Guo-xiang, YAN Wei. Improvement in wall functions for engine radiators[J]. 吉林大学学报(工学版), 2017, 47(3): 804 -810 .
[9] DONG Chao, CHENG Kai, HU Kang-le, HU Wen-qiang. Pitching movement performance of all terrain articulated tracked vehicles[J]. 吉林大学学报(工学版), 2017, 47(3): 827 -836 .
[10] GU Wan-li, ZHANG Sen, HU Yun-feng, CHEN Hong. Nonlinear controller design of brushed DC motor[J]. 吉林大学学报(工学版), 2017, 47(3): 900 -907 .
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd