吉林大学学报(工学版) ›› 2018, Vol. 48 ›› Issue (2): 466-472.doi: 10.13229/j.cnki.jdxbgxb20170023

Previous Articles     Next Articles

Wind resistance performance of long-span continuous rigid-frame bridge in cantilever construction stage

ZHENG Yi-feng1, ZHAO Qun1, BAO Wei1, LI Zhuang2, YU Xiao-fei3   

  1. 1.College of Construction Engineering, Jilin University, Changchun 130026, China;
    2.Northeast Refining & Chemical Engineering Co. Ltd., Jinlin 132001, China;
    3.Forestry Survey and Design Research Institute of Jilin, Changchun 130021, China
  • Online:2018-03-01 Published:2018-03-01

RICH HTML

0   

PDF (PC)

471

Abstract: For the three-span rigid-frame continuous bridge with main span of 160 m in Changbai Mountain International Tourism Resort, the dynamic characteristics in each cantilever construction stage was calculated using Midas Civil software, and the characteristics of the vibration mode and frequency of each construction stage were analyzed. First, according to the climate condition at the bridge site, the gust wind speed was calculated, then the wind field area was simulate using Midas FEA software CFD module. Second, the three component coefficient of the maximum cantilever state of the bridge structure was calculated, and then the static gust was obtained. Finally, the simplified calculation method of buffeting force is adopted to analyze the buffeting force of the bridge under the maximum cantilever state, and the safety of the structure under the maximum cantilever state and wind load was evaluated.

Key words: civil engineering, bridge engineering, wind resistance, cantilever construction, static gust load, buffeting force

CLC Number: 

  • U414
[1] 项海帆.现代桥梁抗风理论与实践[M].北京:人民交通出版社,2005.
[2] JTG/TD60-01-2004.公路桥梁抗风设计规范 [S].
[3] BSI.Steel,Concrete and Composite Bridges:Part2.Specification for Loads[M].London: British Standards Institution,2006.
[4] AASHTO.LRFD Bridge Design Specifications[M].Washington DC: Ameriean Assoeiation of State Highway and Transportation Officials,2005.
[5] Sato H. Wind-resistant design manual for highway bridges in Japan[J].Journal of Wind Engineering and Industrial Aerodynamics, 2003,91:1499-1509.
[6] 刘志刚,陈艾荣.等长双悬臂等效风荷载实用计算方法 [J].同济大学学报,2002,30(5):599-603.
Liu Zhi-gang, Chen Ai-rong. A practical method for calculating equivalent wind load of equal length double cantilever [J]. Journal of Tongji University, 2002,30(5):599-603.
[7] Mendes P A,Branco F A. Unbalanced wind buffeting effects on bridges during double cantilever erection stages [J].Wind and Structures,2001,4(1):45-62.
[1] HUI Ying-xin,MAO Ming-jie,LIU Hai-feng,ZHANG Shang-rong. Influence of structural seismic response of bridges crossing active fault [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1725-1734.
[2] WEI Zhi-gang, LIU Han-bing, SHI Cheng-lin, GONG Ya-feng. Calculation of transverse distribution coefficient of simply supported beam bridge with effect of bridge deck pavement [J]. 吉林大学学报(工学版), 2018, 48(1): 105-112.
[3] GONG Ya-feng, HE Yu-long, TAN Guo-jin, SHEN Yang-fan. Anti-overturning stability analysis for three-span continuous curved girder bridge with single column pier [J]. 吉林大学学报(工学版), 2018, 48(1): 133-140.
[4] NI Ying-sheng, SUN Qi-xin, MA Ye, XU Dong. Calculation of capacity reinforcement about composite box girder with corrugated steel webs based on tensile stress region theory [J]. 吉林大学学报(工学版), 2018, 48(1): 148-158.
[5] WEI Zhi-gang, SHI Cheng-lin, LIU Han-bing, ZHANG Yun-long. Dynamic characteristics of steel-concrete composite simply supported beam under vehicles [J]. 吉林大学学报(工学版), 2017, 47(6): 1744-1752.
[6] WANG Teng, ZHOU Ming-ru, MA Lian-sheng, QIAO Hong-xia. Fracture grouting crack growth of collapsible loess based on fracture theory [J]. 吉林大学学报(工学版), 2017, 47(5): 1472-1481.
[7] ZHENG Yi-feng, MAO Jian, LIANG Shi-zhong, ZHENG Chuan-feng. Negative skin friction of pile foundation considering soil consolidation in high fill site [J]. 吉林大学学报(工学版), 2017, 47(4): 1075-1081.
[8] LI Jing, WANG Zhe. Mechanical characteristics of concrete under true triaxial loading condition [J]. 吉林大学学报(工学版), 2017, 47(3): 771-777.
[9] GUO Nan, ZHANG Ping-yang, ZUO Yu, ZUO Hong-liang. Bending performance of glue-lumber beam reinforced by bamboo plyboard [J]. 吉林大学学报(工学版), 2017, 47(3): 778-788.
[10] ZHANG Yun-long, LIU Zhan-ying, WU Chun-li, WANG Jing. Static and dynamic responses of steel-concrete composite beams [J]. 吉林大学学报(工学版), 2017, 47(3): 789-795.
[11] ZHANG Jing, LIU Xiang-dong. Prediction of concrete strength based on least square support vector machine optimized by chaotic particle swarm optimization [J]. 吉林大学学报(工学版), 2016, 46(4): 1097-1102.
[12] LIU Han-bing, SHI Cheng-lin, TAN Guo-jin. Finite element solution of composite beam with effect of shear slip [J]. 吉林大学学报(工学版), 2016, 46(3): 792-797.
[13] TAN Guo-jin, LIU Zi-yu, WEI Hai-bin, WANG Long-lin. Calculation of natural frequency of simply supported beam bridge reinforced with eccentric prestressed tendons [J]. 吉林大学学报(工学版), 2016, 46(3): 798-803.
[14] CAO Shan-shan, LEI Jun-qing. Fatigue life prediction of steel structure considering interval uncertainty [J]. 吉林大学学报(工学版), 2016, 46(3): 804-810.
[15] GUO Xue-dong, MA Li-jun, ZHANG Yun-long. Analytical solution of the double joint layer composite beam with shear-slip under vertical concentrated load [J]. 吉林大学学报(工学版), 2016, 46(2): 432-438.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] WANG Wen-quan, SHANG Yan-geng, LI Xiu-juan, WANG Chun-sheng, ZHANG Gui-lan. Microstructure and property of laser welded 650 MPa transformation induced plasticity steel sheet[J]. , 2012, 42(05): 1203 -1207 .
[2] HUANG Jian-kang, HE Cui-cui, SHI Yu, FAN Ding. Thermodynamic analysis of Al-Fe intermetallic compounds formed by dissimilar joining of aluminum and galvanized steel[J]. 吉林大学学报(工学版), 2014, 44(4): 1037 -1041 .
[3] XU Tao, LIU Guang-jie, GE Hai-chao, ZHANG Wei, YU Zheng-lei. Modeling heat source of dynamic welding with local coordinate curve path[J]. 吉林大学学报(工学版), 2014, 44(6): 1704 -1709 .
[4] LUO Hai-tao, ZHOU Wei-jia, WANG Hong-guang, WU Jia-feng. Mechanical analysis of friction stir welding robot under typical working conditions[J]. 吉林大学学报(工学版), 2015, 45(3): 884 -891 .
[5] YANG Yue, ZHOU Lei-lei. Effect of micro-arc oxidation treatment on corrosion resistance of aluminum friction stir welding welds[J]. 吉林大学学报(工学版), 2016, 46(2): 511 -515 .
[6] CHU Liang, SUN Cheng-wei, GUO Jian-hua, ZHAO Di, LI Wen-hui. Evaluation method of braking energy recovery based on wheel cylinder pressure[J]. 吉林大学学报(工学版), 2018, 48(2): 349 -354 .
[7] HE Xiang-kun, JI Xue-wu, YANG Kai-ming, WU Jian, LIU Ya-hui. Tire slip control based on integrated-electro-hydraulic braking system[J]. 吉林大学学报(工学版), 2018, 48(2): 364 -372 .
[8] SHI Wen-ku, LIU Guo-zheng, SONG Hai-sheng, CHEN Zhi-yong, ZHANG Bao. Vibration and noise characteristics of electric bus[J]. 吉林大学学报(工学版), 2018, 48(2): 373 -379 .
[9] ZHANG Tian-shi, SONG Dong-jian, GAO Qing, WANG Guo-hua, YAN Zhen-min, SONG Wei. Construction of power battery liquid cooling system for electric vehicle and simulation of its working process[J]. 吉林大学学报(工学版), 2018, 48(2): 387 -397 .
[10] CHEN Ji-qing, DU Tian-ya, LAN Feng-chong. Numerical analysis of human liver biomechanical response to blunt impacts[J]. 吉林大学学报(工学版), 2018, 48(2): 398 -406 .
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd