Journal of Jilin University(Engineering and Technology Edition) ›› 2018, Vol. 48 ›› Issue (5): 1339-1348.doi: 10.13229/j.cnki.jdxbgxb20170860
Previous Articles Next Articles
WANG Yan1,2, GAO Qing1,2, WANG Guo-hua1,2, ZHANG Tian-shi1,2, YUAN Meng1
CLC Number:
| [1] Esmaeili J, Jannesari H.Developing heat source term including heat generation at rest condition for Lithiumion battery pack by up scaling information from cell scale[J]. Energy Conversion & Management, 2017, 139:194-205. [2] Dong J, Su L, Chen Q, et al.Experimental study on thermal-hydraulic performance of a wavy fin-and-flat tube aluminum heat exchange[J]. Applied Thermal Engineering, 2013, 51(1/2):32-39. [3] Williford R E, Viswanathan V V, Zhang J G.Effects of entropy changes in anodes and cathodes on the thermal behavior of lithium ion batteries[J]. Journal of Power Sources, 2009, 189(1):101-107. [4] 常国峰, 陈磊涛, 许思传. 动力蓄电池风冷热管理系统的研究[J].汽车工程,2011,33(10):890-893. Chang Guo-feng,Chen Lei-tao,Xu Si-chuan.A study on the air cooling thermal management system of power battery package[J]. Automotive Engineering,2011, 33(10): 890-893. [5] Tao L, Ma J, Cheng Y, et al.A review of stochastic battery models and health management[J]. Renewable & Sustainable Energy Reviews, 2017, 80:716-732. [6] Zhang S, Wu W, Wang S.Preparation, thermal properties and thermal reliability of a novel mid-temperature composite phase change material for energy conservation[J]. Energy, 2017, 130:228-235. [7] Zhang X, Chang X, Shen Y.Electrochemical electrical thermal modeling of a pouch-type lithium ion battery: an application to optimize temperature distribution[J]. Journal of Energy Storage, 2017, 11:249-257. [8] Zhang P, Yan F, Du C.A comprehensive analysis of energy management strategies for hybrid electric vehicles based on bibliometrics[J]. Renewable & Sustainable Energy Reviews, 2015, 48:88-104. [9] Cuma M U, Koroglu T.A comprehensive review on estimation strategies used in hybrid and battery electric vehicles[J]. Renewable & Sustainable Energy Reviews, 2015, 42:517-531. [10] Rao Z, Wang S, Wu M, et al.Experimental investigation on thermal management of electric vehicle battery with heat pipe[J]. Energy Conversion & Management, 2013, 65:92-97. [11] Wang Q, Jiang B, Xue Q F, et al.Experimental investigation on EV battery cooling and heating by heat pipes[J]. Applied Thermal Engineering, 2015, 88:54-60. [12] Sabbah R, Kizilel R, Selman J R, et al.Active (air-cooled) vs. passive (phase change material) thermal management of high power lithium-ion packs: limitation of temperature rise and uniformity of temperature distribution[J]. Journal of Power Sources, 2008, 182(2):630-638. [13] Chen K, Wang S, Song M, et al.Structure optimization of parallel air-cooled battery thermal management system[J]. International Journal of Heat & Mass Transfer, 2017, 111:943-952. [14] Rao Z H, Zhang G Q.Thermal properties of paraffin wax-based composites containing graphite[J]. Energy Sources, 2011, 33(7):587-593. [15] Cho G Y, Choi J W, Park J H, et al.Transient modeling and validation of lithium ion battery pack with air cooled thermal management system for electric vehicles[J]. International Journal of Automotive Technology, 2014, 15(5):795-803. [16] Wu W, Yang X, Zhang G, et al.Experimental investigation on the thermal performance of heat pipe-assisted phase change material based battery thermal management system[J]. Energy Conversion & Management, 2017, 138:486-492. [17] Burban G, Ayel V, Alexandre A, et al.Experimental investigation of a pulsating heat pipe for hybrid vehicle applications[J]. Applied Thermal Engineering, 2013, 50:94-103. [18] Shi S, Xie Y, Li M, et al.Non-steady experimental investigation on an integrated thermal management system for power battery with phase change materials[J]. Energy Conversion & Management, 2017, 138:84-96. [19] Azizi Y, Sadrameli S M.Thermal management of a LiFePO4, battery pack at high temperature environment using a composite of phase change materials and aluminum wire mesh plates[J]. Energy Conversion & Management, 2016, 128:294-302. [20] Zhang T, Gao Q, Wang G, et al.Investigation on the promotion of temperature uniformity for the designed battery pack with liquid flow in cooling process[J]. Applied Thermal Engineering, 2017, 116:655-662. [21] 裴锋, 符兴锋. 基于风冷模式的18650动力电池系统安全性设计研究[J]. 汽车技术, 2015(8):48-55. Pei Feng, Fu Xing-feng.A research on safety design of 18650 power battery system based on air cooling mode[J]. Automobile Technology,2015(8):48-55. [22] Khateeb S A, Amiruddin S, Farid M, et al.Thermal management of Li-ion battery with phase change material for electric scooters: experimental validation[J]. Journal of Power Sources, 2005, 142(1):345-353. [23] Wu M, Hung Y, Wang Y, et al.Heat dissipation behavior of the nickel/metal hydride battery[J]. Journal of the Electrochemical Society, 2000, 147(3):930-935. [24] Wang S, Li Y, Li Y Z, et al.A forced gas cooling circle packaging with liquid cooling plate for the thermal management of Li-ion batteries under space environment[J]. Applied Thermal Engineering, 2017,123:929-939. [25] 施尚, 余建祖, 谢永奇,等. 锂电池相变材料/风冷综合热管理系统温升特性[J]. 北京航空航天大学学报, 2017, 43(6):1278-1286. Shi Shang, Yu Jian-zu, Xie Yong-qi, et al.Temperature rise characteristic of lithium battery integrated thermal management system combining phase change materials with air cooling[J] Journal of Beijing University of Aeronautics and Astronautics,2017, 43(6):1278-1286. [26] 李斌, 常国峰, 林春景,等. 车用动力锂电池产热机理研究现状[J]. 电源技术, 2014, 38(2):378-381. Li Bin, Chang Guo-feng, Lin Chun-jing, et al.Research on heat generate mechanism of Li-ion batteries for electric vehicles[J]. Chinese Journal of Power Sources, 2014, 38(2):378-381. [27] 匡勇, 刘霞, 钱振,等. 锂离子电池产热特性理论模型研究进展[J]. 储能科学与技术, 2015, 4(6):599-608. Kuang Yong, Liu Xia, Qian Zhen, et al.Review on heat generation theory model of lithium-ion battery[J]. Energy Storage Science and Technology, 2015, 4(6):599-608. [28] 常小幻. 锂离子电池产热特性和散热管理的研究[D]. 成都:电子科技大学材料与能源学院, 2016. Chang Xiao-huan.Research on heat generation and the thermal management of the lithium-ion battery[D]. Chengdu:School of Energy Science and Engineering,University of Electronic Science and Technology of China,2016. [29] Park C, Jaura A K.Dynamic thermal model of Li-ion battery for predictive behavior in hybrid and fuel cell vehicles[J]. SAE Transactions, 2003, 112:1835-1842. [30] 张天时, 宋东鉴, 高青,等. 动力电池组扁管束液流热管理增效[J]. 吉林大学学报:工学版, 2017, 47(4):1032-1039. Zhang Tian-shi, Song Dong-jian, Gao Qing, et al.Promotive effect on thermal management of power battery pack with liquid flow and flat tube bank[J]. Journal of Jilin University(Engineering and Technology Edition), 2017,47(4):1032-1039. [31] 闵德平. 电池组结构设计及其热管理液流传热强化研究[D]. 长春:吉林大学汽车工程学院, 2016. Min De-ping.Enhanced heat transfer on thermal management of hydronic battery packing[D]. Changchun:College of Automotive Engineering, Jilin University,2016. [32] Kowal J, Arzberger A, Blanke H, et al.How to determine the time for temperature equalisation in batteries and supercaps for reliable laboratory measurements[J]. Journal of Energy Storage, 2015, 4:113-120. [33] 张天时,宋东鉴,高青,等. 电动汽车动力电池液体冷却系统构建及其工作过程仿真[J].吉林大学学报:工学版,2018,48(2):387-397. Zhang Tian-shi, Song Dong-jian, Gao Qing, et al.Construction of power battery liquid cooling system for electric vehicle and simulation of its working process[J] Journal of Jilin University(Engineering and Technology Edition),2018,48(2):387-397. |
| [1] | CHANG Cheng,SONG Chuan-xue,ZHANG Ya-ge,SHAO Yu-long,ZHOU Fang. Minimizing inverter capacity of doubly-fed machine driving electric vehicles [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1629-1635. |
| [2] | XI Li-he,ZHANG Xin,SUN Chuan-yang,WANG Ze-xing,JIANG Tao. Adaptive energy management strategy for extended range electric vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1636-1644. |
| [3] | HE Ren,YANG Liu,HU Dong-hai. Design and analysis of refrigeration system supplied by solar auxiliary power of refrigerator car [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1645-1652. |
| [4] | NA Jing-xin,MU Wen-long,FAN Yi-sa,TAN Wei,YANG Jia-zhou. Effect of hygrothermal aging on steel-aluminum adhesive joints for automotive applications [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1653-1660. |
| [5] | LIU Yu-mei,LIU Li,CAO Xiao-ning,XIONG Ming-ye,ZHUANG Jiao-jiao. Construction on collision avoidance model of bogie dynamic simulation test bench [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1661-1668. |
| [6] | ZHAO Wei-qiang, GAO Ke, WANG Wen-bin. Prevention of instability control of commercial vehicle based on electric-hydraulic coupling steering system [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1305-1312. |
| [7] | SONG Da-feng, WU Xi-tao, ZENG Xiao-hua, YANG Nan-nan, LI Wen-yuan. Life cycle cost analysis of mild hybrid heavy truck based on theoretical fuel consumption model [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1313-1323. |
| [8] | ZHU Jian-feng, ZHANG Jun-yuan, CHEN Xiao-kai, HONG Guang-hui, SONG Zheng-chao, CAO Jie. Design modification for automotive body structure based on seat pull safety performance [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1324-1330. |
| [9] | NA Jing-xin, PU Lei-xin, FAN Yi-sa, SHEN Chuan-liang. Effect of temperature and humidity on the failure strength of Sikaflex-265 aluminum adhesive joints [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1331-1338. |
| [10] | JIN Li-sheng, XIE Xian-yi, GAO Lin-lin, GUO Bai-cang. Distributed electric vehicle stability control based on quadratic programming [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1349-1359. |
| [11] | KUI Hai-lin, BAO Cui-zhu, LI Hong-xue, LI Ming-da. Idling time prediction method based on least square support vector machine [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1360-1365. |
| [12] | WANG De-jun, WEI Wei-li, BAO Ya-xin. Actuator fault diagnosis of ESC system considering crosswind interference [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1548-1555. |
| [13] | HU Man-jiang, LUO Yu-gong, CHEN Long, LI Ke-qiang. Vehicle mass estimation based on longitudinal frequency response characteristics [J]. 吉林大学学报(工学版), 2018, 48(4): 977-983. |
| [14] | LIU Guo-zheng, SHI Wen-ku, Chen Zhi-yong. Finite element analysis of transmission error for hypoid gears considering installation error [J]. 吉林大学学报(工学版), 2018, 48(4): 984-989. |
| [15] | YU Liang, LI He-yan, MA Biao, LI Hui-zhu, LI Ming-yang. Analysis and verification for average axial pressure attenuation of multi-disc clutch [J]. 吉林大学学报(工学版), 2018, 48(4): 990-997. |
|