吉林大学学报(工学版)

• • 上一篇    下一篇

基于分布参数模型的柔性臂变结构控制

曹小涛,李元春   

  1. 吉林大学 通信工程学院,长春 130022
  • 收稿日期:2007-07-23 修回日期:2007-12-28 出版日期:2008-07-01 发布日期:2008-07-01
  • 通讯作者: 李元春

Variable structure control of flexible manipulator based on distributed parameter model

Variable structure control of flexible manipulator based on distributed parameter model   

  1. College of Communication Engineering,Jilin University,Changchun 130022,China
  • Received:2007-07-23 Revised:2007-12-28 Online:2008-07-01 Published:2008-07-01
  • Contact: LI Yuan-chun

摘要: 提出了一种针对柔性臂分布参数模型的变结构控制方法,解决了系统存在参数不确定性和在外部干扰下的镇定问题。通过Lyapunov函数方法设计了系统的变结构控制器,其中滑模面设计为关节角、关节角速度和柔性臂根部应变的线性组合。由线性算子半群理论和LaSalle不变集原理证明了闭环系统是渐近稳定的。仿真结果验证了该方法的有效性。

关键词: 自动控制技术, 柔性臂, 变结构控制, 线性算子半群, LaSalle不变集原理

Abstract: A sliding mode variable structure control method was proposed based on distributed parameter model of flexible manipulator, and the stabilization problem of the controlled system with uncertain parameter and disturbance was resolved. The variable structure controller was designed by use of Lyapunov function method, and sliding surface was chosen as a linear combination of joint angle, joint angle velocity and root strain of flexible manipulator. An asymptotical stability of the closed loop system was proved by using linear operator semigroup and LaSalle invariance principle. Simulation results were presented to validate the proposed controller performance.

Key words: automatic control technology, flexible manipulator, variable structure control, semigroup of linear operator, LaSalle invariance principle

中图分类号: 

  • TP241
[1] 顾万里,王萍,胡云峰,蔡硕,陈虹. 具有H性能的轮式移动机器人非线性控制器设计[J]. 吉林大学学报(工学版), 2018, 48(6): 1811-1819.
[2] 李战东,陶建国,罗阳,孙浩,丁亮,邓宗全. 核电水池推力附着机器人系统设计[J]. 吉林大学学报(工学版), 2018, 48(6): 1820-1826.
[3] 赵爽,沈继红,张刘,赵晗,陈柯帆. 微细电火花加工表面粗糙度快速高斯评定[J]. 吉林大学学报(工学版), 2018, 48(6): 1838-1843.
[4] 王德军, 魏薇郦, 鲍亚新. 考虑侧风干扰的电子稳定控制系统执行器故障诊断[J]. 吉林大学学报(工学版), 2018, 48(5): 1548-1555.
[5] 闫冬梅, 钟辉, 任丽莉, 王若琳, 李红梅. 具有区间时变时滞的线性系统稳定性分析[J]. 吉林大学学报(工学版), 2018, 48(5): 1556-1562.
[6] 张茹斌, 占礼葵, 彭伟, 孙少明, 刘骏富, 任雷. 心肺功能评估训练系统的恒功率控制[J]. 吉林大学学报(工学版), 2018, 48(4): 1184-1190.
[7] 董惠娟, 于震, 樊继壮. 基于激光测振仪的非轴对称超声驻波声场的识别[J]. 吉林大学学报(工学版), 2018, 48(4): 1191-1198.
[8] 田彦涛, 张宇, 王晓玉, 陈华. 基于平方根无迹卡尔曼滤波算法的电动汽车质心侧偏角估计[J]. 吉林大学学报(工学版), 2018, 48(3): 845-852.
[9] 张士涛, 张葆, 李贤涛, 王正玺, 田大鹏. 基于零相差轨迹控制方法提升快速反射镜性能[J]. 吉林大学学报(工学版), 2018, 48(3): 853-858.
[10] 王林, 王洪光, 宋屹峰, 潘新安, 张宏志. 输电线路悬垂绝缘子清扫机器人行为规划[J]. 吉林大学学报(工学版), 2018, 48(2): 518-525.
[11] 胡云峰, 王长勇, 于树友, 孙鹏远, 陈虹. 缸内直喷汽油机共轨系统结构参数优化[J]. 吉林大学学报(工学版), 2018, 48(1): 236-244.
[12] 朱枫, 张葆, 李贤涛, 王正玺, 张士涛. 基于强跟踪卡尔曼滤波的陀螺信号处理[J]. 吉林大学学报(工学版), 2017, 47(6): 1868-1875.
[13] 晋超琼, 张葆, 李贤涛, 申帅, 朱枫. 基于扰动观测器的光电稳定平台摩擦补偿策略[J]. 吉林大学学报(工学版), 2017, 47(6): 1876-1885.
[14] 冯建鑫. 具有测量时滞的不确定系统的递推鲁棒滤波[J]. 吉林大学学报(工学版), 2017, 47(5): 1561-1567.
[15] 许金凯, 王煜天, 张世忠. 驱动冗余重型并联机构的动力学性能[J]. 吉林大学学报(工学版), 2017, 47(4): 1138-1143.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!