吉林大学学报(工学版) ›› 2011, Vol. 41 ›› Issue (01): 221-0225.

• 论文 • 上一篇    下一篇

船舶动力系统智能控制

张妤1,2,朱齐丹1,戴天虹2, 穆丽新2   

  1. 1.哈尔滨工程大学 自动化学院|哈尔滨 150001;2.东北林业大学 机电工程学院|哈尔滨 150040
  • 收稿日期:2009-03-18 出版日期:2011-01-01 发布日期:2011-01-01
  • 通讯作者: 张妤(1980-),女,讲师,博士.研究方向:船舶动力系统智能控制.E-mail:zhangyu0902@163.com E-mail:zhangyu0902@163.com
  • 作者简介:张妤(1980-),女,讲师,博士.研究方向:船舶动力系统智能控制.E-mail:zhangyu0902@163.com
  • 基金资助:

    国家自然科学基金项目(60875025);中央高校基本科研业务费专项基金项目(DL09AB09);东北林业大学青年科研基金项目(09018);黑龙江省自然科学基金项目(F200920)

Intelligent control for marine power system

ZHANG Yu 1,2, ZHU Qi-dan1| DAI Tian-hong2, MU Li-xin2   

  1. 1.College of Automation|Harbin Engineering University, Harbin 150001,China|2.College of Mechanical and Electrical Engineering,Northeast Forestry University, Harbin 150040,China
  • Received:2009-03-18 Online:2011-01-01 Published:2011-01-01

摘要:

针对船舶动力系统存在着非线性、不确定性和复杂性,传统的速度调节系统已经不能满足控制需要,作者将模糊神经网络应用到复杂过程控制中去,实现动力系统的智能控制。采用模块建模法建立了汽轮机模型,给出了一种基于模糊神经网络的转速调节系统。并将粗糙集理论与模糊神经网络结合起来,利用粗糙集从观测数据中提取规则,并寻求最小规则集,解决了模糊神经网络“规则爆炸”问题。在MATLAB平台上进行仿真,结果表明该方法对于负荷的扰动及工况的变化有良好的控制效果。

关键词: 自动控制技术, 船舶动力系统, 汽轮机, 智能控制, 模糊神经网络, 粗糙集

Abstract:

Due the existence of nonlinearity, uncertainty and complexity in marine power system, conventional speed regulation system can no longer meet the controlling requirement. Fuzzy Neural Network was applied to the complex process modeling and logical inference to realize intelligent control of power system. Modular modeling methods are used to establish the model of steam turbine. A new type speed regulation system based on fuzzy neural network was presented. The method combines the rough set with fuzzy neural network, which can derive control rules from inputoutput data effectively and find the minimal set of the rules. This method can solve the problem of “rule explosion”. Results of simulation using Matlab indicate that the proposed method possesses the ability of good-quality control when the load disturbances and condition change.

Key words: automatic control technology, marine power system, steam turbine, intelligent control, fuzzy neural network, rough set

中图分类号: 

  • TP273
[1] 顾万里,王萍,胡云峰,蔡硕,陈虹. 具有H性能的轮式移动机器人非线性控制器设计[J]. 吉林大学学报(工学版), 2018, 48(6): 1811-1819.
[2] 李战东,陶建国,罗阳,孙浩,丁亮,邓宗全. 核电水池推力附着机器人系统设计[J]. 吉林大学学报(工学版), 2018, 48(6): 1820-1826.
[3] 赵爽,沈继红,张刘,赵晗,陈柯帆. 微细电火花加工表面粗糙度快速高斯评定[J]. 吉林大学学报(工学版), 2018, 48(6): 1838-1843.
[4] 王德军, 魏薇郦, 鲍亚新. 考虑侧风干扰的电子稳定控制系统执行器故障诊断[J]. 吉林大学学报(工学版), 2018, 48(5): 1548-1555.
[5] 闫冬梅, 钟辉, 任丽莉, 王若琳, 李红梅. 具有区间时变时滞的线性系统稳定性分析[J]. 吉林大学学报(工学版), 2018, 48(5): 1556-1562.
[6] 张茹斌, 占礼葵, 彭伟, 孙少明, 刘骏富, 任雷. 心肺功能评估训练系统的恒功率控制[J]. 吉林大学学报(工学版), 2018, 48(4): 1184-1190.
[7] 董惠娟, 于震, 樊继壮. 基于激光测振仪的非轴对称超声驻波声场的识别[J]. 吉林大学学报(工学版), 2018, 48(4): 1191-1198.
[8] 田彦涛, 张宇, 王晓玉, 陈华. 基于平方根无迹卡尔曼滤波算法的电动汽车质心侧偏角估计[J]. 吉林大学学报(工学版), 2018, 48(3): 845-852.
[9] 张士涛, 张葆, 李贤涛, 王正玺, 田大鹏. 基于零相差轨迹控制方法提升快速反射镜性能[J]. 吉林大学学报(工学版), 2018, 48(3): 853-858.
[10] 王林, 王洪光, 宋屹峰, 潘新安, 张宏志. 输电线路悬垂绝缘子清扫机器人行为规划[J]. 吉林大学学报(工学版), 2018, 48(2): 518-525.
[11] 胡云峰, 王长勇, 于树友, 孙鹏远, 陈虹. 缸内直喷汽油机共轨系统结构参数优化[J]. 吉林大学学报(工学版), 2018, 48(1): 236-244.
[12] 王芳荣, 郭柏苍, 金立生, 高琳琳, 岳欣羽. 次任务驾驶安全评价指标筛选及其权值计算[J]. 吉林大学学报(工学版), 2017, 47(6): 1710-1715.
[13] 王春生, 邹丽, 杨鑫华. 基于邻域粗糙集的铝合金焊接接头疲劳寿命影响因素分析[J]. 吉林大学学报(工学版), 2017, 47(6): 1848-1853.
[14] 朱枫, 张葆, 李贤涛, 王正玺, 张士涛. 基于强跟踪卡尔曼滤波的陀螺信号处理[J]. 吉林大学学报(工学版), 2017, 47(6): 1868-1875.
[15] 晋超琼, 张葆, 李贤涛, 申帅, 朱枫. 基于扰动观测器的光电稳定平台摩擦补偿策略[J]. 吉林大学学报(工学版), 2017, 47(6): 1876-1885.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!