吉林大学学报(工学版) ›› 2018, Vol. 48 ›› Issue (3): 744-751.doi: 10.13229/j.cnki.jdxbgxb20170171

• 论文 • 上一篇    下一篇

径向滑动轴承润滑油膜流动-传热过程仿真

孙正, 黄钰期, 俞小莉   

  1. 浙江大学 能源工程学院,杭州 310027;
  • 收稿日期:2017-05-08 出版日期:2018-05-20 发布日期:2018-05-20
  • 通讯作者: 黄钰期(1979-),女,副教授,博士.研究方向:计算流体力学.E-mail:huangyuqi@zju.edu.cn
  • 作者简介:孙正(1989-),男,博士研究生.研究方向:车辆热管理.E-mail:sunz@zju.edu.cn
  • 基金资助:
    国家自然科学基金项目(51206141); 中央高校基本科研业务费专项资金项目(2016QNA4011).

Numerical simulation of flow and heat transfer in journal bearing lubrication

SUN Zheng, HUANG Yu-qi, YU Xiao-li   

  1. College of Energy Engineering, Zhejiang University, Hangzhou 310027, China
  • Received:2017-05-08 Online:2018-05-20 Published:2018-05-20

摘要: 针对润滑油膜进行计算流体力学(CFD)分析时,空化模型的选取对计算结果有非常显著的影响。本文引入全空化模型,完善了基于CFD的动压润滑数值仿真方法,对比了不同空化现象处理方法对于压力和温度分布计算结果的影响。此外,还比较了不同方法在求解流动传热问题中的适用性和精度差异,进一步验证了CFD方法在求解此类问题时的优势。结果表明:引入全空化模型的CFD方法可将最大压力计算结果精度提升12.1%,压力和温度的整体分布也与试验值更接近;且温度分布计算结果更符合实际;在模拟气穴溃灭过程中,现有全空化模型在计算气穴区域温度分布时仍有改进空间。

关键词: 动力机械及工程, 工程热物理, 径向滑动轴承, 计算流体力学, 空化现象, 相变传热

Abstract: In the simulation of hydrodynamics lubrication using CFD based methods, cavitation model has remarkable influence on the simulation results. In this paper, a full-cavitation model is introduced to improve the current CFD based methods. The influences of different cavitation treatment methods on the distributions of pressure and temperature are studied. Further, the applicability and accuracy between Reynolds and CFD based methods are compared. The results show that the accuracy of the maximum pressure is improved up to 12.1%, and the overall pressure distribution is also more close to the experimental data. The temperature distribution with the full-cavitation model is more realistic. However, in modeling the bubble collapsing process, the current full-cavitation model needs to be improved when calculating the temperature distribution in the cavitation area.

Key words: power mechinery and engineering, engineering thermophysics, journal bearing, computational fluid dynamics(CFD), cavitation, phase change and heat transfer

中图分类号: 

  • TK414
[1] Hartinger M,Dumont M L,Loannides S,et al.CFD modeling of a thermal and shear-thinning elastohydrodynamic line contact[J]. Journal of Tribology,2008,130:041503.
[2] Bruyere V,Fillon N,Morales-Espejel G E,et al. Computational fluid dynamics and full elasticity model for sliding line thermal elastohydrodynamic contacts[J]. Tribology International,2012,46(1):3-13.
[3] 于晓东,付旭,刘丹,等. 环形腔多油垫静压推力轴承热变形[J]. 吉林大学学报:工学版,2015,45(2):460-465.
Yu Xiao-dong,Fu Xu,Liu Dan,et al.Thermal deformation of annular recess multi-pad hydrostatic thrust bearing[J]. Journal of Jilin University(Engineering and Technology Edition),2015,45(2):460-465.
[4] Dowson D.A generalized Reynolds equation for fluid-film lubrication[J]. International Journal of Mechanical Sciences,1962,4(2):159-170.
[5] Yang Pei-ran,Wen Shi-zhu.A generalized Reynolds equation for non-Newtonian thermal elastohydrodynamic lubrication[J]. Journal of Tribology,1990,112(4):631-636.
[6] 滕宪斌,张均东,叶伟强. 基于热弹性流体动压润滑的柴油机曲轴主轴承润滑特性分析[J]. 船舶工程,2016,38(4):61-64,80.
Teng Xian-bin,Zhang Jun-dong,Ye Wei-qiang.Characteristic analysis of diesel engine main bearing lubricationbased on thermo-elastic hydrodynamic pressure[J]. Ship Engineering,2016,38(4):61-64,80.
[7] Sun Jun, Zhao Xiao-yong, Wang Hu. Lubrication analysis of crankshaft bearing considering crankshaft deformation[C]∥SAE Papers,2011-01-0613.
[8] Inui M, Kobayashi M, Oowaki K,et al.Analysis of oil film generation on the main journal bearing using a thin-film sensor and elasto-hydrodynamic lubrication (EHL) model[J]. Sae International Journal of Fuels & Lubricants,2013,6(1):119-125.
[9] 桂长林,何芝仙,李震,等. 求解内燃机曲轴-轴承轴心轨迹的动力学方法[J]. 机械工程学报,2009,45(8):163-170.
Gui Chang-lin,He Zhi-xian,Li Zhen,et al.Dynamic method to calculate for shaft center trajectory of bearing of internal combustion engine[J]. Journal of Mechanical Engineering,2009,45(8):163-170.
[10] Zhang Xiu-li,Yin Zhong-wei,Gao Geng-yuan,et al.Determination of stiffness coefficients of hydrodynamic water-lubricated plain journal bearings[J]. Tribology International,2015,85:37-47.
[11] Gao Geng-yuan,Yin Zhong-wei,Jiang Dan,et al.Numerical analysis of plain journal bearing under hydrodynamic lubrication by water[J]. Tribology International,2014,75:31-38.
[12] Li Qiang, Liu Shu-lian, Pan Xiao-hong,et al.A new method for studying the 3D transient flow of misaligned journal bearings in flexible rotor-bearing systems[J]. Journal of Zhejiang University—Science A(Applied Physics & Engineering),2012,13(4):293-310.
[13] Shi Xi, Ni Ting.Effects of groove textures on fully lubricated sliding with cavitation[J]. Tribology International,2011,44(12):2022-2028.
[14] Papadopoulos C I, Nikolakopoulos P G, Kaiktsis L.Characterization of stiffness and damping in textured sector pad micro thrust bearings using computational fluid dynamics[J]. Journal of Engineering for Gas Turbines and Power,2012,134(11):112502.
[15] 符永宏,张宗涛,张彦虎,等. 基于CFD活塞环表面凹腔微造型动压润滑性能研究[J]. 润滑与密封,2010,35(12):25-27.
Fu Yong-hong,Zhang Zong-tao,ZhangYan-hu,et al. Research on hydrodynamic lubrication of piston ring surface micro-pores based on CFD[J]. Lubrication Engineering,2010,35(12):25-27.
[16] 高庆水,杨建刚. 基于cfd方法的液体动压滑动轴承动特性研究[J]. 润滑与密封,2008,33(9):70-72.
Gao Qing-shui,Yang Jian-gang.Research on the dynamic characteristics of hydrodynamical journal bearing based on CFD analysis[J]. Lubrication Engineering,2008,33(9):70-72.
[17] 张楚,杨建刚,郭瑞,等. 基于两相流理论的滑动轴承流场计算分析[J]. 中国电机工程学报,2010,30(29):80-84.
Zhang Chu,Yang Jian-gang,Guo Rui,et al.Simulation of journal bearing flow field using computational fluid dynamics two phase flow theory[J]. Proceedings of the CSEE,2010,30(29):80-84.
[18] 王康,张卫正,郭良平,等. 内燃机连杆大头轴承润滑CFD分析[J]. 内燃机学报,2006,24(2):173-178.
Wang Kang,Zhang Wei-zheng,Guo Liang-ping,et al.CFD simulation of engine connecting-rod big-end bearing lubrication[J]. Transactions of CSICE,2006,24(2):173-178.
[19] Li Jiang,Chen Hao-sheng.Evaluation on applicability of Reynolds equation for squared transverse roughness compared to CFD[J]. Journal of Tribology,2007,129(4):963-967.
[20] Gertzos K P,Nikolakopoulos P G,Papadopoulos C A.CFD analysis of journal bearing hydrodynamic lubrication by Bingham lubricant[J]. Tribology International,2008,41(12):1190-1204.
[21] 孟凡明,陈原培,杨涛. CFX和Fluent在径向滑动轴承润滑计算中的异同探讨[J]. 重庆大学学报,2013,36(1):7-14.
Meng Fan-ming,Chen Yuan-pei,Yang Tao.Discussion on similarities and differences between CFX and Fluent software in calculation journal bearing lubrication[J]. Journal of Chongqing University,2013,36(1):7-14.
[22] Deligant M,Podevin P,Descombes G.CFD model for turbocharger journal bearing performances[J]. Applied Thermal Engineering,2011,31(5):811-819.
[23] Lin Q,Wei Z,Wang N,et al.Analysis on the lubrication performances of journal bearing system using computational fluid dynamics and fluid-structure interaction considering thermal influence and cavitation[J]. Tribology International,2013,64(3):8-15.
[24] Liu H,Xu H,Ellison P J,et al.Application of computational fluid dynamics and fluid-structure interaction method to the lubrication study of a rotor-bearing system[J]. Tribology Letters,2010,38(3):325-336.
[25] Almqvist T,Almqvist A, Larsson R.A comparison between computational fluid dynamic andreynolds approaches for simulating transient EHL line contacts[J]. Tribology International,2004,37(1):61-69.
[26] Almqvist T, Larsson R.The Navier-Stokes approach for thermal EHL line contact solutions[J]. Tribology International,2002,35(35):163-170.
[27] Almqvist T, Larsson R.Thermal transient rough EHL line contact simulations by aid of computational fluid dynamics[J]. Tribology International,2008,41(8):683-693.
[28] Singhal A K, Athavale M M, Li H, et al.Mathematical basis and validation of the full cavitation model[J]. Journal of Fluids Engineering,2002,124(3):617-624.
[29] Ferron J,Frene J,Boncompain R.A study of the thermohydrodynamic performance of a plain journal bearing comparison between theory and experiments[J]. Journal of Lubrication Technology,1983,105(3):422-428.
[30] Pierre I,Fillon M,Bouyer J.Thermohy drodynamic behavior of misaligned plain journal bearings: Theoretical and experimental approaches[J]. Tribology Transactions,2004,47(4):594-604.
[1] 江涛,林学东,李德刚,杨淼,汤雪林. 基于人工神经网络的放热规律的量化预测[J]. 吉林大学学报(工学版), 2018, 48(6): 1747-1754.
[2] 孟育博, 李丕茂, 张幽彤, 王志明. 共轨系统压力波动和多次喷射油量偏差的抑制[J]. 吉林大学学报(工学版), 2018, 48(3): 760-766.
[3] 孟育博, 张幽彤, 王志明, 张晓晨, 樊利康, 李涛. 压电喷油器压电执行器热-电-机械耦合迟滞特性[J]. 吉林大学学报(工学版), 2018, 48(2): 480-485.
[4] 吴志军, 赵文伯, 张青. 基于热氛围燃烧器的湍流射流起升火焰基础研究进展[J]. 吉林大学学报(工学版), 2016, 46(6): 1881-1891.
[5] 崔金生, 侯绪研, 邓宗全, 潘万竞, 姜生元. 真空颗粒系统有效导热系数测量试验台研制及试验[J]. 吉林大学学报(工学版), 2016, 46(2): 457-464.
[6] 齐子姝, 高青, 刘研, 白莉. 地能利用热泵系统模型计算及其多年运行工况分析[J]. 吉林大学学报(工学版), 2015, 45(6): 1811-1816.
[7] 刘忠长, 孙士杰, 田径, 徐瑞辰, 汪泊舟. 瞬态工况下喷油参数对柴油机排放及燃烧特性的影响[J]. 吉林大学学报(工学版), 2014, 44(6): 1639-1646.
[8] 包堂堂, 胡宗杰, 胡俊超, 阮逸平, 邓俊, 吴志军. 基于超声雾化的柴油/汽油混合燃料液滴群燃烧特性[J]. 吉林大学学报(工学版), 2013, 43(04): 903-908.
[9] 齐子姝, 高青, 刘研, 于鸣. 联供模式地下换热器温变及其热泵效能分析[J]. 吉林大学学报(工学版), 2012, 42(02): 339-343.
[10] 于秀敏,谭兴闻,马君,李国良,董伟,齐万强,崔峰云. 缸内直喷汽油机起动控制[J]. 吉林大学学报(工学版), 2011, 41(6): 1554-1558.
[11] 张英朝, 韦甘, 张喆. 不同尾翼两厢轿车的气动特性数值模拟[J]. 吉林大学学报(工学版), 2011, 41(01): 1-0005.
[12] 张英朝, 张喆, 李杰. 基于计算流体力学的虚拟风洞试验[J]. 吉林大学学报(工学版), 2010, 40(增刊): 90-0094.
[13] 刘成材,高青,马纯强,金英爱,李玥. 发动机可变组分进气系统的膜气体分离特性[J]. 吉林大学学报(工学版), 2010, 40(03): 625-0629.
[14] 张英朝,李杰,张喆,胡兴军. 汽车风洞试验段尺寸参数对试验的影响[J]. 吉林大学学报(工学版), 2010, 40(02): 346-0350.
[15] 张英朝,张喆,李杰,韦甘,罗双虎. 基于空气动力学数值模拟的汽车造型设计[J]. 吉林大学学报(工学版), 2009, 39(增刊2): 260-0263.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 何磊,宗长富,田承伟,吴仁军,张太武. 线控转向汽车直流电机的故障诊断与容错控制[J]. 吉林大学学报(工学版), 2011, 41(03): 608 -612 .
[2] 刘松山, 王庆年, 王伟华, 林鑫. 惯性质量对馈能悬架阻尼特性和幅频特性的影响[J]. 吉林大学学报(工学版), 2013, 43(03): 557 -563 .
[3] 初亮, 王彦波, 祁富伟, 张永生. 用于制动压力精确控制的进液阀控制方法[J]. 吉林大学学报(工学版), 2013, 43(03): 564 -570 .
[4] 李静, 王子涵, 余春贤, 韩佐悦, 孙博华. 硬件在环试验台整车状态跟随控制系统设计[J]. 吉林大学学报(工学版), 2013, 43(03): 577 -583 .
[5] 胡兴军, 李腾飞, 王靖宇, 杨博, 郭鹏, 廖磊. 尾板对重型载货汽车尾部流场的影响[J]. 吉林大学学报(工学版), 2013, 43(03): 595 -601 .
[6] 王同建, 陈晋市, 赵锋, 赵庆波, 刘昕晖, 袁华山. 全液压转向系统机液联合仿真及试验[J]. 吉林大学学报(工学版), 2013, 43(03): 607 -612 .
[7] 张春勤, 姜桂艳, 吴正言. 机动车出行者出发时间选择的影响因素[J]. 吉林大学学报(工学版), 2013, 43(03): 626 -632 .
[8] 马万经, 谢涵洲. 双停车线进口道主、预信号配时协调控制模型[J]. 吉林大学学报(工学版), 2013, 43(03): 633 -639 .
[9] 于德新, 仝倩, 杨兆升, 高鹏. 重大灾害条件下应急交通疏散时间预测模型[J]. 吉林大学学报(工学版), 2013, 43(03): 654 -658 .
[10] 肖赟, 雷俊卿, 张坤, 李忠三. 多级变幅疲劳荷载下预应力混凝土梁刚度退化[J]. 吉林大学学报(工学版), 2013, 43(03): 665 -670 .