吉林大学学报(工学版) ›› 2016, Vol. 46 ›› Issue (4): 1124-1129.doi: 10.13229/j.cnki.jdxbgxb201604017

• Orginal Article • Previous Articles     Next Articles

Accelerated model of swash-plate axial piston pump

ZHAO Cun-ran1, LIU Wei1, JIANG Ji-hai1, SHAO Hui2, TIAN Yong2   

  1. 1.College of Mechatronics Engineering, Harbin Institute of Technology, Harbin 150001,China;
    2.Shenyang Hero Fluid Control System Co., Ltd., Shenyang 110122, China
  • Received:2014-10-15 Online:2016-07-20 Published:2016-07-20

RICH HTML

1   

PDF (PC)

162

Abstract: In light of the characteristics of the swash-plate axial piston pump with multiple failure modes, first, the Failure Modes, Effects and Criticality Analysis (FMEA) method is employed to identify the failure mode and effect of each component in a piston pump. Then, on the basis of the analysis of the stress factors that impact the failure rate, a simplified failure rate model of the swash-plate axial piston pump was set up according to the two forms of stresses applied in the Accelerated Life Test (ALT). Finally, an accelerated model of the swash-plate axial piston pump was obtained.

Key words: turn and control of fluid, swash-plate axial piston pump, accelerated life test(ALT), failure rate, accelerated model

CLC Number: 

  • TG156
[1] 李壮云. 液压元件与系统[M]. 北京:机械工业出版社,2012.
[2] 孙毅刚, 许耀铭. 液压元件可靠性试验的基本方法[J]. 哈尔滨工业大学学报, 1992,24(5): 96-99.
Sun Yi-gang, Xu Yao-ming. The basic methods of reliability tests of hydraulic components[J]. Journal of Harbin Institute of Technology, 1992,24(5): 96-99.
[3] Jung Dong-soo, Kim Hyoung-eui. Development of accelerated life test method of hydraulic pump[J]. Key Engineering Materials, 2006,326-328:1861-1864.
[4] Bannantine J A, Comer J J, Handrock J L. Fundamentals of Fatigue Analysis[M]. Upper Saddle River: Prentice-Hall, 1990.
[5] 王少萍, 李沛琼, 王占林. 双应力加速模型的建立及参数估计[J]. 航空学报, 1994,15(2): 236-241.
Wang Shao-ping, Li Pei-qiong, Wang Zhan-lin. The double-stress accelerated model establishment and parameters estimation[J]. Chinese Journal of Aeronautics, 1994,15(2): 236-241.
[6] B·M·莫尔辛, Г·Г·萨莫洛夫. 王伯良(译). 轴向柱塞泵加速试验的方法[DB/OL].[2014-09-30].http://www.cqvip.com/read/read.aspx?id=171946.
[7] Wang Shao-ping, Shi Jian. Accelerated life testing under variable synthetic stresses for hydraulic pump[J]. Materials Science Forum, 2006, 505-507: 1165-1170.
[8] Tan L, Zhu B S, Cao S L, et al. Cavitation flow simulation for a centrifugal pump at a low flow rate[J]. Chinese Science Bulletin, 2013,58(8): 949-952.
[9] Luo X W, Wei W, Ji B, et al. Comparison of cavitation prediction for a centrifugal pump with or without volute casing[J]. Journal of Mechanical Science and Technology, 2013,27(6):1643-1648.
[10] Du Jun, Wang Shao-ping, Zhang Hai-yan. Layered clustering multi-fault diagnosis for hydraulic piston pump[J]. Mechanical Systems and Signal Processing, 2013,36(2):487-504.
[11] Surface N. Handbook of Reliability Prediction Procedures for Mechanical Equipment[M]. Dan Neck:Naval Surface Warfare Center (NSWC),2009.
[12] Hydraulic fluid power components-assessment of reliability by testing[R]. National Fluild Power Association(NFPA), 2007.
[13] 茆诗松, 汤阴才, 王玲玲. 可靠性统计[M]. 北京:高等教育出版社, 2008.
[1] WANG Jia-yi, LIU Xin-hui, WANG Xin, QI Hai-bo, SUN Xiao-yu, WANG Li. Mechanism and inhibition for displacement shifting impact on digital secondary component [J]. 吉林大学学报(工学版), 2017, 47(6): 1775-1781.
[2] SHEN Gui-xiang, ZENG Wen-bin, ZHANG Ying-zhi, WU Mao-kun, ZHENG Yu-bin. Determination of average maintenance time of CNC machine tools under minimum failure rate [J]. 吉林大学学报(工学版), 2017, 47(5): 1519-1526.
[3] WANG Li, LIU Xin-hui, WANG Xin, CHEN Jin-shi, LIANG Yi-jie. Shifting strategy of digital hydraulic transmission system for wheel loader [J]. 吉林大学学报(工学版), 2017, 47(3): 819-826.
[4] LI Shen-long, LIU Shu-cheng, XING Qing-kun, ZHANG Jing, LAI Yu-yang. Clutch friction pair motion effect caused by oil flow based on LBM-LES [J]. 吉林大学学报(工学版), 2017, 47(2): 490-497.
[5] ZHANG Min, LI Song-jing, CAI Shen. Microfluidic liquid color-changing glasses controlled by valveless piezoelectric micro-pump [J]. 吉林大学学报(工学版), 2017, 47(2): 498-503.
[6] GU Shou-dong, LIU Jian-fang, YANG Zhi-gang, JIAO Xiao-yang, JIANG Hai, LU Song. Characteristics of solder paste jetting valve driven by piezostack [J]. 吉林大学学报(工学版), 2017, 47(2): 510-517.
[7] YANG Hua-yong, WANG Shuang, ZHANG Bin, HONG Hao-cen, ZHONG Qi. Development and prospect of digital hydraulic valve and valve control system [J]. 吉林大学学报(工学版), 2016, 46(5): 1494-1505.
[8] YUAN Zhe, XU Dong, LIU Chun-bao, LI Xue-song, LI Shi-chao. Strength analysis of hydraulic retarder blade based on the process of thermal-fluid structure interaction [J]. 吉林大学学报(工学版), 2016, 46(5): 1506-1512.
[9] SHEN Wei, ZHANG Di-jia, SUN Yi, JIANG Ji-hai. Control design of the swash plate angle for hydraulic pump/motor based on FSMI method [J]. 吉林大学学报(工学版), 2016, 46(5): 1513-1519.
[10] ZHANG Qin-guo, QIN Si-cheng, MA Run-da, YANG Li-guang, XI Yuan, LIU Jin-qiao. Hydraulic system thermal characteristics of loader working device [J]. 吉林大学学报(工学版), 2016, 46(3): 811-817.
[11] CHEN Jin-shi, WANG Guo-qiang, GONG Xun, WANG Xin, WANG Li, DU Yang. Characteristics of cartridge one-way relief valve [J]. 吉林大学学报(工学版), 2016, 46(2): 465-470.
[12] ZHANG Qin-guo, QIN Si-cheng, MA Run-da, LIU Yu-fei, XI Yuan. Match and simulation analysis of hydraulic system radiator of wheel loader [J]. 吉林大学学报(工学版), 2015, 45(4): 1124-1129.
[13] WEN De-sheng, LIU Qiao-yan, LIU Zhong-xun, GAO Jun-feng, ZHOU Rui-bin, LYU Jian-sen. Principle and experiment validation of roller tip-vanetype double-stator multi-speed motor [J]. 吉林大学学报(工学版), 2015, 45(4): 1130-1138.
[14] JIANG Wan-lu,LU Chuan-qi,ZHU Yong. HHT and fuzzy C-means clustering-based fault recognition for axial piston pump [J]. 吉林大学学报(工学版), 2015, 45(2): 429-436.
[15] DONG Han, LIU Xin-hui, WANG Xin, ZHENG Bo-yuan, LIANG Wei-quan, WANG Jia-yi. Parallel hydraulic hybrid braking regenerative characteristics [J]. 吉林大学学报(工学版), 2014, 44(6): 1655-1663.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] LIU Song-shan, WANG Qing-nian, WANG Wei-hua, LIN Xin. Influence of inertial mass on damping and amplitude-frequency characteristic of regenerative suspension[J]. 吉林大学学报(工学版), 2013, 43(03): 557 -563 .
[2] CHU Liang, WANG Yan-bo, QI Fu-wei, ZHANG Yong-sheng. Control method of inlet valves for brake pressure fine regulation[J]. 吉林大学学报(工学版), 2013, 43(03): 564 -570 .
[3] LI Jing, WANG Zi-han, YU Chun-xian, HAN Zuo-yue, SUN Bo-hua. Design of control system to follow vehicle state with HIL test beach[J]. 吉林大学学报(工学版), 2013, 43(03): 577 -583 .
[4] HU Xing-jun, LI Teng-fei, WANG Jing-yu, YANG Bo, GUO Peng, LIAO Lei. Numerical simulation of the influence of rear-end panels on the wake flow field of a heavy-duty truck[J]. 吉林大学学报(工学版), 2013, 43(03): 595 -601 .
[5] WANG Tong-jian, CHEN Jin-shi, ZHAO Feng, ZHAO Qing-bo, LIU Xin-hui, YUAN Hua-shan. Mechanical-hydraulic co-simulation and experiment of full hydraulic steering systems[J]. 吉林大学学报(工学版), 2013, 43(03): 607 -612 .
[6] ZHANG Chun-qin, JIANG Gui-yan, WU Zheng-yan. Factors influencing motor vehicle travel departure time choice behavior[J]. 吉林大学学报(工学版), 2013, 43(03): 626 -632 .
[7] MA Wan-jing, XIE Han-zhou. Integrated control of main-signal and pre-signal on approach of intersection with double stop line[J]. 吉林大学学报(工学版), 2013, 43(03): 633 -639 .
[8] YU De-xin, TONG Qian, YANG Zhao-sheng, GAO Peng. Forecast model of emergency traffic evacuation time under major disaster[J]. 吉林大学学报(工学版), 2013, 43(03): 654 -658 .
[9] XIAO Yun, LEI Jun-qing, ZHANG Kun, LI Zhong-san. Fatigue stiffness degradation of prestressed concrete beam under multilevel amplitude cycle loading[J]. 吉林大学学报(工学版), 2013, 43(03): 665 -670 .
[10] XIAO Rui, DENG Zong-cai, LAN Ming-zhang, SHEN Chen-liang. Experiment research on proportions of reactive powder concrete without silica fume[J]. 吉林大学学报(工学版), 2013, 43(03): 671 -676 .
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd