吉林大学学报(工学版) ›› 2017, Vol. 47 ›› Issue (4): 1114-1120.doi: 10.13229/j.cnki.jdxbgxb201704015
• Orginal Article • Previous Articles Next Articles
XU Tao, ZHAO Yu-jie, SHAO Qing, ZHANG You-he, XU Tian-shuang, YU Zheng-lei
CLC Number:
| [1] Tatjana Lazovic, Mileta Ristivojevic, Radivoje Mitrovic. Mathematical model of load distribution in rolling bearing[J]. FME Transactions, 2008, 36(4): 189-196. [2] He Wei, Chen Yang, He Jun-chao, et al. Spherical contact mechanical analysis of roller cone drill bits journal bearing[J]. Petroleum, 2016,2(2):208-214. [3] 方兵,张雷,曲兴田,等. 角接触球轴承刚度理论计算与实验[J]. 吉林大学学报:工学版,2012,42(4):840-844. Fang Bing, Zhang Lei, Qu Xing-tian, et al. Theoretical and experimental research of stiffness of angular contact ball bearing[J]. Journal of Jilin University(Engineering and Technology Edition), 2012, 42(4): 840-844. [4] Liao Neng Tung, Bin Jen Fin. Ball bearing skidding under radial and axial loads[J]. Mechanism and Machine Theory, 2002, 37: 91-113. [5] Radoslav Tomovic. Calculation of the necessary level of external radial load for inner ring support on q rolling elements in a radial bearing with internal radial clearance[J]. International Journal of Mechanical Sciences, 2012, 60: 23-33. [6] Tang Zhao-ping, Sun Jian-ping. The contact analysis for deep groove ball bearing based on ANSYS[J]. Procedia Engineering, 2011, 23: 423-428. [7] Zhao Chun-jiang, Yu Xiao-kai, Huang Qing-xue, et al. Analysis on the load characteristics and coefficient of friction of angular contact ball bearing at high speed[J]. Tribology International, 2015, 87: 50-56. [8] Ricci Mario. Static load distribution in ball bearings including the effects of temperature and fit[J]. Tribology & Design, 2010, 66: 223-234. [9] 颜诚,张跃春,王文,等. 基于联合载荷的角接触球轴承轴向承载能力研究[J]. 机械强度,2015,37(6):1124-1129. Yan Cheng, Zhang Yue-chun, Wang Wen, et al. Research on the axial carrying capacity of angular contact ball bearings based on combined loads[J]. Journal of Mechanical Strength, 2015, 37(6): 1124-1129. [10] 刘显军,洪军,王军,等. 联合外载荷作用下角接触球轴承内部载荷分布和变形的数值迭代计算[J]. 机床与液压,2012,40(3):1-4. Liu Xian-jun, Hong Jun, Wang Jun, et al. Numerical iterative computation method for solving the internal load distribution and deformation of ball bearing under the condition of combined external load[J]. Machine Tool & Hydraulics, 2012, 40 (3): 1-4. [11] 冈本纯三. 球轴承的设计计算[M]. 北京:机械工业出版社,2003. |
| [1] | BI Qiu-shi,WANG Guo-qiang,HUANG Ting-ting,MAO Rui,LU Yan-peng. Tooth strength analysis of mineral sizer by coupling discrete element method and finite element method [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1770-1776. |
| [2] | ZHU Wei,WANG Chuan-wei,GU Kai-rong,SHEN Hui-ping,XU Ke,WANG Yuan. Stiffness and dynamics analysis of a new type of tensegrity parallel mechanism [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1777-1786. |
| [3] | LIU Jian-fang, WANG Ji-bo, LIU Guo-jun, LI Xin-bo, LIANG Shi-hai, YANG Zhi-gang. PMMA micromixer embedded with 3D channel based on piezoelectric actuation [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1500-1507. |
| [4] | WANG Tao, SAN Xiao-gang, GAO Shi-jie, WANG Hui-xian, WANG Jing, NI Ying-xue. Dynamic characteristics of vertical shaft system of photoelectric turntable [J]. 吉林大学学报(工学版), 2018, 48(4): 1099-1105. |
| [5] | HE Ji-lin, CHEN Yi-long, WU Kang, ZHAO Yu-ming, WANG Zhi-jie, CHEN Zhi-wei. Energy flow analysis of crane hoisting system and experiment of potential energy recovery system [J]. 吉林大学学报(工学版), 2018, 48(4): 1106-1113. |
| [6] | XIE Chuan-liu, TANG Fang-ping, SUN Dan-dan, ZHANG Wen-peng, XIA Ye, DUAN Xiao-hui. Model experimental analysis of pressure pulsation in vertical mixed-flow pump system [J]. 吉林大学学报(工学版), 2018, 48(4): 1114-1123. |
| [7] | SUN Xiu-rong, DONG Shi-min, WANG Hong-bo, LI Wei-cheng, SUN Liang. Comparison of multistage simulation models of entire sucker rod with spatial buckling in tubing [J]. 吉林大学学报(工学版), 2018, 48(4): 1124-1132. |
| [8] | YOSHINO Tatsuo, FAN Lu-lu, YAN Lei, XU Tao, LIN Ye, GUO Gui-kai. Multiobjective optimization design for dummy chest structure based on MBNWS algorithm [J]. 吉林大学学报(工学版), 2018, 48(4): 1133-1139. |
| [9] | LIU Kun, LIU Yong, YAN Jian-chao, JI Shuo, SUN Zhen-yuan, XU Hong-wei. Dynamic analysis of sit-to-stand human motion based on in vitro-sensor detection [J]. 吉林大学学报(工学版), 2018, 48(4): 1140-1146. |
| [10] | LIU Zhi-feng, ZHAO Dai-hong, WANG Yu-mo, HUN Lian-ming, ZHAO Yong-sheng, DONG Xiang-min. Relationship between bearing capacity of heavy machine hydrostatic rotary table and temperature field distribution of oil pad [J]. 吉林大学学报(工学版), 2018, 48(3): 773-780. |
| [11] | CAO Jing-hua, KONG Fan-sen, RAN Yan-zhong, SONG Rui-chen. Back pressure controller design of air compressor based on fuzzy self-adaptive PID control [J]. 吉林大学学报(工学版), 2018, 48(3): 781-786. |
| [12] | LI Rui, ZHANG Lu-yang, LIU Lin, WU Yue-yuan, CHEN Shi-wei. Magneto-rheological vibration isolation for three-span bridge based on similarity theory [J]. 吉林大学学报(工学版), 2018, 48(3): 787-795. |
| [13] | CHEN Zhong-min, HOU Li, DUAN Yang, ZHANG Qi, YANG Zhong-xue, JIANG Yi-qiang. Vibration analysis of a new pin-cycloid speed reducer [J]. 吉林大学学报(工学版), 2018, 48(1): 174-185. |
| [14] | LIU Nian, XU Tao, XU Tian-shuang, HU Xian-lei, LIU Wei-hai. Lightweight design of TRB dashboard cross beam [J]. 吉林大学学报(工学版), 2018, 48(1): 199-204. |
| [15] | LI Jia-qi, NI Ji-min, GAO Xu-nan, SHI Xiu-yong, XU Xiao-chuan. Analysis of lubrication performance of floating ring bearing considering radial temperature gradient [J]. 吉林大学学报(工学版), 2017, 47(6): 1782-1790. |
|
||