Journal of Jilin University(Engineering and Technology Edition) ›› 2021, Vol. 51 ›› Issue (6): 2068-2078.doi: 10.13229/j.cnki.jdxbgxb20200670

Previous Articles    

Influencing factors and structural optimization of main cable saddle bearing capacity of suspension bridge

Chang-jun ZHONG1,2(),Zhong-bin WANG3(),Chen-yang LIU1   

  1. 1.School of Civil Engineering，Southwest Jiaotong University，Chengdu 610031，China
    2.School of Civil Engineering，Southeast University，Nanjing 211189，China
    3.China Railway Bridge Survey and Design Institute Group Co. ，Ltd. ，Wuhan 430050，China
  • Received:2020-09-03 Online:2021-11-01 Published:2021-11-15
  • Contact: Zhong-bin WANG E-mail:793713337@qq.com;wangzb@bri.com.cn

RICH HTML

 2   

PDF (PC)

129

Abstract:

In order to solve the contradiction between the safety and economy of the main saddle of suspension bridge, the ultimate bearing capacity and influencing factors of the main saddle were studied. By summarizing the design parameters of the main saddle structure of the suspension bridge, the parametric geometric model is established using Autodesk Inventor software, and the large-scale general finite element software ABAQUS is imported for large number of numerical simulation studies. The influencing factors of the cable saddle bearing capacity and their changing law are investigated, and the reasonable optimization of the structure is performed. The analysis results show that the ultimate bearing capacity of the original design cable saddle is 3.00 times the design load, which has sufficient safety reserves. The strength of cast steel material has great influence on the bearing capacity of the main cable saddle, while the material strength of the container steel has little influence. The thickness and number of the transverse ribs has a great influence on the load-bearing capacity of the saddle. The thickness of the sidewall of the saddle groove, whether the longitudinal stiffener is provided with transverse ribs, and the thickness of the web have less influence on the load-bearing capacity of the saddle. The transverse rigidity and ultimate bearing capacity of the saddle will decrease with reduction of the transverse size of the saddle. The ultimate bearing capacity of the optimized saddle is reduced by 10%, while the steel consumption is reduced by 20%.

Key words: bridge engineering, main cable saddle, ultimate bearing capacity, parameter analysis, structural optimization

CLC Number: 

  • U448.25

Fig.1

Schematic diagram of preliminary design of main cable saddle of Longtan Bridge"

Fig.2

Schematic diagram of main saddle parameters"

Table 1

Radial load calculation table"

Fcnnsrvfsr/（N·mm－1）fsrp/MPa
446 579131269 0005 12030.66
446 579121269 0004 72665.63
446 579111269 0004 33260.17
446 579101269 0003 93854.70
446 57991269 0003 54449.23
446 57981269 0003 15043.76
446 57971269 0002 75741.14

Fig.3

Saddle design load and boundary conditions"

Fig.4

Schematic diagram of finite element model"

Fig.5

Schematic diagram of key points"

Fig.6

Influence of cast steel material onbearing capacity"

Fig.7

Influence of welding plate material onbearing capacity"

Fig.8

Influence of transverse rib thickness onbearing capacity"

Fig.9

Influence of saddle groove wallthickness on bearing capacity"

Fig.10

Set the stiffening longitudinal rib or not the transverse rib midpoint displacement-load multiple curve"

Fig.11

Influence of the thickness of the middlelongitudinal rib on bearing capacity"

Fig.12

Influence of the lateral size reduction of thesaddle on the bearing capacity"

Fig.13

Influence of the number of transverseribs on the bearing capacity"

Fig.14

Parameter sensitivity analysis"

Fig.15

Load-displacement curve of key pointsconsidering the combined influence ofcross rib thickness and saddlegroove wall thickness"

Fig.16

Analysis of the bearing capacity ofsaddle at each optimization stage"

Table 2

Changes in cable saddle qualityin each optimization stage"

优化阶段索鞍质量/kg
铸钢Q345R总计
设计尺寸77 49888 966166 464
BH100-CB6065 75288 670154 422
不设置加劲纵肋65 75281 536147 288
横向缩减300 mm63 59870 916134 514
1 贾界峰,涂金平,周泳涛,等. 空间索面自锚式悬索桥主索鞍计算方法[J]. 桥梁建设, 2007, 37(5): 38-41.
Jia Jie-feng, Tu Jin-ping, Zhou Yong-tao, et al. Calculation method of main cable saddle for self-anchored suspension bridge with spatial cable plane[J]. Bridge Construction, 2007, 37(5): 38-41.
2 杜万强. 某悬索桥主索鞍应力试验及数值分析[J]. 铁道建筑, 2013, 18(2): 18-19.
Du Wan-qiang. Stress test and numerical analysis of the main saddle of a suspension bridge[J]. Railway Construction, 2013, 18(2): 18-19.
3 方国强,林韬. 岳阳洞庭湖大桥主索鞍受力分析[J]. 市政技术, 2013, 31(3): 56-57, 60.
Fang Guo-qiang, Lin Tao. Force analysis of the main cable saddle of Yueyang Dongting lake bridge[J]. Municipal Technology, 2013, 31(3): 56-57, 60.
4 黄奶清,李亚平,黄吉滔. 悬索桥主塔索鞍计算分析研究[J]. 工程与建设, 2014, 28(2): 185-186.
Huang Nai-qing, Li Ya-ping, Huang Ji-tao. Calculation and analysis of suspension bridge main tower saddle[J]. Engineering and Construction, 2014, 28(2): 185-186.
5 李俊,卫星,李小珍,等. 大型钢网壳结构铸钢节点复杂受力的试验研究[J]. 土木工程学报, 2005, 38(6): 8-12, 19,53.
Li Jun, Wei Xing, Li Xiao-zhen, et al. Experimental study on complex forces of cast steel joints of large steel reticulated shell structure[J]. China Civil Engineering Journal, 2005, 38(6): 8-12, 19,53.
6 陈誉, 魏琳. 圆支管-H型钢主管T型节点抗压性能试验研究[J]. 土木工程学报, 2013, 46(12): 25-32.
Chen Yu, Wei Lin. Experimental study on compressive performance of circular branch pipe-H-shaped steel main pipe T-joint[J]. China Civil Engineering Journal, 2013, 46(12): 25-32.
7 王朝波,赵宪忠,陈以一,等. 上海铁路南站外柱异形铸钢节点承载性能研究[J]. 土木工程学报, 2008, 41(1): 18-23.
Wang Chao-bo, Zhao Xian-zhong, Chen Yi-yi, et al. Research on bearing performance of special-shaped cast steel joints for outer column of Shanghai South Railway Station[J]. China Civil Engineering Journal, 2008, 41(1): 18-23.
8 王萌,石永久,王元清,等. 空间网壳相贯节点受力性能有限元分析[J]. 建筑结构, 2013, 43(21): 9-13, 37.
Wang Meng, Shi Yong-jiu, Wang Yuan-qing, et al. Finite element analysis of mechanical performance of intersecting joints of space reticulated shell[J]. Building Structure, 2013, 43(21): 9-13, 37.
9 杨渊. 铸钢件力学性能试验研究及铸钢塔结构分析[D]. 天津:天津大学建筑工程学院, 2017.
Yang Yuan. Experimental research on mechanical properties of steel castings and structural analysis of cast steel towers[D]. Tianjin: School of Civil Engineering and Architecture, Tianjin University, 2017.
10 秦蓬军. 铸钢柱脚的性能研究[D]. 西安:西安建筑科技大学土木工程学院, 2005.
Qin Peng-jun. Research on the performance of cast steel column foot[D]. Xi'an: School of Civil Engineering, Xi'an University of Architecture and Technology, 2005.
11 张达明. 复杂钢结构局部壳体屈曲及铸钢节点受力分析[D]. 杭州:浙江大学建筑工程学院, 2007.
Zhang Da-ming. Analysis of local shell buckling and cast steel joint forces of complex steel structures[D]. Hangzhou:School of Civil Engineering and Architecture, Zhejiang University, 2007.
12 孙鹏,王元清,石永久. 考虑倒角系数的T型铸钢节点轴向承载力非线性分析[J]. 空间结构, 2006, 12(2): 39-43.
Sun Peng, Wang Yuan-qing, Shi Yong-jiu. Nonlinear analysis of axial bearing capacity of T-type cast steel joints considering chamfer coefficient[J]. Space Structure, 2006, 12(2): 39-43.
13 刘宇航. 基于BIM的悬索桥缆索系统参数化设计研究[D]. 成都:西南交通大学土木工程学院, 2019.
Liu Yu-hang. Research on parametric design of suspension bridge cable system based on BIM[D]. Chendu: School of Civil Engineering, Southwest Jiaotong University, 2019.
14 . 公路悬索桥设计规范[S].
15 . 公路桥涵设计通用规范[S].
[1] Wei CHEN,Tian-bao WAN,Zhong-bin WANG,Xuan LI,Rui-li SHEN. Design and performance of internal air supply conduit for dehumidification in main cables of suspension bridges [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(5): 1749-1755.
[2] Shu-lun GUO,Tie-yi ZHONG,Zhi-gang YAN. Calculation method of buffeting response for stay cables of long⁃span cable⁃stayed bridge [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(5): 1756-1762.
[3] Kai GAO,Gang LIU. Effective strength improvement of global critical strength branch and bound method [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(2): 597-603.
[4] Ya-feng GONG,Jia-xiang SONG,Guo-jin TAN,Hai-peng BI,Yang LIU,Cheng-xin SHAN. Multi⁃vehicle bridge weigh⁃in⁃motion algorithm [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(2): 583-596.
[5] Qing-wen KONG,Guo-jin TAN,Long-lin WANG,Yong WANG,Zhi-gang WEI,Han-bing LIU. Analysis of free vibration characteristics of cracked box girder bridge based on finite element method [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(1): 225-232.
[6] Hua CHEN,Yao-jia CHEN,Bin XIE,Peng-kai WANG,Lang-ni DENG. Interface failure mechanism and bonding strength calculation of CFRP tendons bonded anchorage system [J]. Journal of Jilin University(Engineering and Technology Edition), 2020, 50(5): 1698-1708.
[7] Ya-feng GONG,Jia-xiang SONG,Hai-peng BI,Guo-jin TAN,Guo-hai HU,Si-yuan LIN. Static test and finite element analysis of scale model of fabricated box culvert [J]. Journal of Jilin University(Engineering and Technology Edition), 2020, 50(5): 1728-1738.
[8] Hao GAO,Jun-jie WANG,Hui-jie LIU,Jian-ming WANG. Design criterion and applied devices for controlled seismic behavior of continuous girder bridges [J]. Journal of Jilin University(Engineering and Technology Edition), 2020, 50(5): 1718-1727.
[9] Qian-hui PU,Jing-wen LIU,Gang-yun ZHAO,Meng YAN,Xiao-bin LI. Theoretical analysis of bearing capacity of concrete eccentric compressive column reinforced by HTRCS [J]. Journal of Jilin University(Engineering and Technology Edition), 2020, 50(2): 606-612.
[10] Yun-long ZHANG,Yang-yang GUO,Jing WANG,Dong LIANG. Natural frequency and mode of vibration of steel⁃concrete composite beam [J]. Journal of Jilin University(Engineering and Technology Edition), 2020, 50(2): 581-588.
[11] Bo-xin WANG,Hai-tao YANG,Qing WANG,Xin GAO,Xiao-xu CHEN. Bridge vibration signal optimization filtering method based on improved CEEMD⁃multi⁃scale permutation entropy analysis [J]. Journal of Jilin University(Engineering and Technology Edition), 2020, 50(1): 216-226.
[12] Miao ZHANG,Yong-jiu QIAN,Fang ZHANG,Shou-qin ZHU. Experimental analysis of spatial force performance of concrete-reinforced stone arch bridge based on enlarged section method [J]. Journal of Jilin University(Engineering and Technology Edition), 2020, 50(1): 210-215.
[13] Yi JIA,Ren-da ZHAO,Yong-bao WANG,Fu-hai LI. Sensitivity analysis of viscous damper parameters for multi⁃span and long⁃unit continuous girder bridges [J]. Journal of Jilin University(Engineering and Technology Edition), 2019, 49(6): 1871-1883.
[14] Chun-ling ZHONG,Dong LIANG,Yun-long ZHANG,Jing WANG. Calculation of natural vibration frequency of simply supported beam strengthened by external prestressing [J]. Journal of Jilin University(Engineering and Technology Edition), 2019, 49(6): 1884-1890.
[15] Lun-hua BAI,Rui-li SHEN,Xing-biao ZHANG,Lu WANG. In-plane stability of self-anchored suspension bridge [J]. Journal of Jilin University(Engineering and Technology Edition), 2019, 49(5): 1500-1508.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd