吉林大学学报(工学版) ›› 2014, Vol. 44 ›› Issue (6): 1704-1709.doi: 10.13229/j.cnki.jdxbgxb201406026
Previous Articles Next Articles
XU Tao1, LIU Guang-jie1, 2, GE Hai-chao1, ZHANG Wei1, YU Zheng-lei3
CLC Number:
[1] Mohd Shahar Sulaiman, Yupiter HP Manurung, Esa Haruman, et al. Simulation and experimental study on distortion of butt and T-joints using WELD PLANNER[J]. Journal of Mechaanical Science and Technology, 2011, 25(10):2641-2646. [2] Gannon L, Liu Yi, Pegg N, et al. Effect of welding sequence on residual stress and distortion in flat-bar stiffened plates[J]. Dalhouse University Department of Civil and Resourse Engineering, 2010, 23(3):385-404. [3] Lundback A. Modeling and simulations of welding and metal deposition[D]. Lulea:Department of Mechanical Engineering Division of Computer Aided Design,Luleal University of Technology, 2000. [4] 魏艳红,胡广旭,董志波,等.曲线路径动态焊接热源建模[J].沈阳工业大学学报,2012,34(4):385-390. Wei Yan-hong, Hu Guang-xu, Dong Zhi-bo, et al. Modeling for heat source of dynamic welding with curve path[J]. Journal of Shenyang University of Technology, 2012,34(4):385-390. [5] John G, Aditya C, Malcolm B. New finite element model for welding heat sources[J]. Metallurgical Transactions B (Process Metallurgy), 1984, 15B(2):299-305. |
[1] | ZHANG Jian, JIANG Ji-hai, LI Yan-jie. Flow characteristics of different cone valves [J]. 吉林大学学报(工学版), 2016, 46(6): 1900-1905. |
[2] | WU Wei, DI Chong-feng, HU Ji-bin, YUAN Shi-hua. Adaptive reverse driving system based on hydraulic transformer [J]. 吉林大学学报(工学版), 2016, 46(6): 1906-1911. |
[3] | WANG Zhen-bao, QIN Si-cheng, MA Run-da. Thermal characteristic analysis in hydraulic transmission system of wheel loader [J]. 吉林大学学报(工学版), 2016, 46(4): 1136-1141. |
[4] | WU Wei, DI Chong-feng, HU Ji-bin, YUAN Shi-hua. Static stiffness of hydraulic transformer controlled system [J]. 吉林大学学报(工学版), 2016, 46(4): 1130-1135. |
[5] | YUAN Zhe, ZHOU Qian-qian, LIU Chun-bao, MA Wen-xing, XU Zhi-xuan. Blade design and aerodynamics of MW wind turbine based on BEM theory [J]. 吉林大学学报(工学版), 2016, 46(4): 1142-1148. |
[6] | LIU Xin-hui, LI Qian-wen, CHEN Jin-shi, ZHANG Peng, NIU Ping-jie. Mathematical modeling and simulation of load-sensing priority valve [J]. 吉林大学学报(工学版), 2015, 45(6): 1817-1824. |
[7] | DENG Hai-shun, HUANG Kun, WANG Chuan-li, LI Yong-mei. Overturning moment of cylinder of balanced two-ring axial piston pump [J]. 吉林大学学报(工学版), 2015, 45(5): 1468-1473. |
[8] | WEI Wei1,YANG Zhi-dong,QU Zhi-yong2,HAN Jun-wei2. Internal force coupling control for hyper-redundant multi-axis hydraulic shaking table [J]. 吉林大学学报(工学版), 2015, 45(5): 1461-1467. |
[9] | MA Wen-xing, ZHANG Yan, LEI Yu-long. Design and test of control system of hydrodynamic automotive transmission for heavy vehicle [J]. 吉林大学学报(工学版), 2015, 45(5): 1455-1460. |
[10] | LIU Jian-fang, CHEN Hong-xia, LIU Guo-jun. Transport performance of non-contact transformation using aerostatic suspension [J]. 吉林大学学报(工学版), 2015, 45(3): 814-819. |
[11] | DONG Han,LIU Xin-hui,WANG Xin,ZHENG Bo-yuan,LIANG Wei-quan,WANG Jia-yi. Impact of main parameters of accumulator on parallel hydraulic hybrid [J]. 吉林大学学报(工学版), 2015, 45(2): 420-428. |
[12] | LI Fei-long, LIN Yong-gang, LI Wei, LIU Hong-wei, CUI Bao-ling. Energy hydraulic transmission system of wind turbine [J]. 吉林大学学报(工学版), 2014, 44(6): 1664-1668. |
[13] | TAN Yue, MA Wen-xing, LIU Chun-bao. Precision control on blades forming of stamping welded hydrodynamic torque converter [J]. 吉林大学学报(工学版), 2013, 43(增刊1): 530-534. |
[14] | DONG Han, LIU Xin-hui, WANG Xin, CHEN Jin-shi, WANG Jia-yi, ZHENG Bo-yuan. Energy saving performance of hydraulic hybrid system with AMESim [J]. 吉林大学学报(工学版), 2013, 43(05): 1264-1270. |
[15] | TAN Yue, MA Wen-xing, LU Xiu-quan. Welding strength analysis of stamping welded hydrodynamic torque converter based on fluid-solid interaction [J]. 吉林大学学报(工学版), 2013, 43(04): 928-932. |
|